[PATCH] drm/ast: astdp: fix pre-op vs post-op bug

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The test for "Link training failed" expect the loop to exit with "i"
set to zero but it exits when "i" is set to -1.  Change this from a
post-op to a pre-op so that it exits with "i" set to zero.  This
changes the number of iterations from 10 to 9 but probably that's
okay.

Fixes: 2281475168d2 ("drm/ast: astdp: Perform link training during atomic_enable")
Signed-off-by: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
---
 drivers/gpu/drm/ast/ast_dp.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/ast/ast_dp.c b/drivers/gpu/drm/ast/ast_dp.c
index 5d07678b502c..4329ab680f62 100644
--- a/drivers/gpu/drm/ast/ast_dp.c
+++ b/drivers/gpu/drm/ast/ast_dp.c
@@ -148,7 +148,7 @@ void ast_dp_link_training(struct ast_device *ast)
 	struct drm_device *dev = &ast->base;
 	unsigned int i = 10;
 
-	while (i--) {
+	while (--i) {
 		u8 vgacrdc = ast_get_index_reg(ast, AST_IO_VGACRI, 0xdc);
 
 		if (vgacrdc & AST_IO_VGACRDC_LINK_SUCCESS)
-- 
2.43.0





[Index of Archives]     [Kernel Development]     [Kernel Announce]     [Kernel Newbies]     [Linux Networking Development]     [Share Photos]     [IDE]     [Security]     [Git]     [Netfilter]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Device Mapper]

  Powered by Linux