[PATCH] regulator: bd9576: Constify struct linear_range

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



'struct linear_range' are not modified in these drivers.

Constifying this structure moves some data to a read-only section, so
increase overall security.

This is also more consistent with the other struct linear_range declaration
above.

On a x86_64, with allmodconfig, as an example:
Before:
======
   text	   data	    bss	    dec	    hex	filename
  20767	   4544	      0	  25311	   62df	drivers/regulator/bd9576-regulator.o

After:
=====
   text	   data	    bss	    dec	    hex	filename
  21023	   4288	      0	  25311	   62df	drivers/regulator/bd9576-regulator.o

Signed-off-by: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
---
Compile tested-only.
---
 drivers/regulator/bd9576-regulator.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/regulator/bd9576-regulator.c b/drivers/regulator/bd9576-regulator.c
index d4ca7b3f4036..bf5f9c3f2c97 100644
--- a/drivers/regulator/bd9576-regulator.c
+++ b/drivers/regulator/bd9576-regulator.c
@@ -68,25 +68,25 @@ static const struct linear_range voutL1_xvd_ranges[] = {
 	REGULATOR_LINEAR_RANGE(220000, 0x6e, 0x7f, 0),
 };
 
-static struct linear_range voutS1_ocw_ranges_internal[] = {
+static const struct linear_range voutS1_ocw_ranges_internal[] = {
 	REGULATOR_LINEAR_RANGE(200000, 0x01, 0x04, 0),
 	REGULATOR_LINEAR_RANGE(250000, 0x05, 0x18, 50000),
 	REGULATOR_LINEAR_RANGE(1200000, 0x19, 0x3f, 0),
 };
 
-static struct linear_range voutS1_ocw_ranges[] = {
+static const struct linear_range voutS1_ocw_ranges[] = {
 	REGULATOR_LINEAR_RANGE(50000, 0x01, 0x04, 0),
 	REGULATOR_LINEAR_RANGE(60000, 0x05, 0x18, 10000),
 	REGULATOR_LINEAR_RANGE(250000, 0x19, 0x3f, 0),
 };
 
-static struct linear_range voutS1_ocp_ranges_internal[] = {
+static const struct linear_range voutS1_ocp_ranges_internal[] = {
 	REGULATOR_LINEAR_RANGE(300000, 0x01, 0x06, 0),
 	REGULATOR_LINEAR_RANGE(350000, 0x7, 0x1b, 50000),
 	REGULATOR_LINEAR_RANGE(1350000, 0x1c, 0x3f, 0),
 };
 
-static struct linear_range voutS1_ocp_ranges[] = {
+static const struct linear_range voutS1_ocp_ranges[] = {
 	REGULATOR_LINEAR_RANGE(70000, 0x01, 0x06, 0),
 	REGULATOR_LINEAR_RANGE(80000, 0x7, 0x1b, 10000),
 	REGULATOR_LINEAR_RANGE(280000, 0x1c, 0x3f, 0),
-- 
2.45.2





[Index of Archives]     [Kernel Development]     [Kernel Announce]     [Kernel Newbies]     [Linux Networking Development]     [Share Photos]     [IDE]     [Security]     [Git]     [Netfilter]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Device Mapper]

  Powered by Linux