On Sun, 24 Mar 2024 13:36:16 +0100
Christophe JAILLET <christophe.jaillet@xxxxxxxxxx> wrote:
> Use spi_read() instead of hand-writing it.
> It is less verbose.
>
> Signed-off-by: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
Applied to the togreg-normal branch of iio.git.
Thanks,
Jonathan
> ---
> Compile test only
> ---
> drivers/iio/pressure/hsc030pa_spi.c | 7 +------
> 1 file changed, 1 insertion(+), 6 deletions(-)
>
> diff --git a/drivers/iio/pressure/hsc030pa_spi.c b/drivers/iio/pressure/hsc030pa_spi.c
> index 818fa6303454..337eecc577d2 100644
> --- a/drivers/iio/pressure/hsc030pa_spi.c
> +++ b/drivers/iio/pressure/hsc030pa_spi.c
> @@ -23,14 +23,9 @@
> static int hsc_spi_recv(struct hsc_data *data)
> {
> struct spi_device *spi = to_spi_device(data->dev);
> - struct spi_transfer xfer = {
> - .tx_buf = NULL,
> - .rx_buf = data->buffer,
> - .len = HSC_REG_MEASUREMENT_RD_SIZE,
> - };
>
> msleep_interruptible(HSC_RESP_TIME_MS);
> - return spi_sync_transfer(spi, &xfer, 1);
> + return spi_read(spi, data->buffer, HSC_REG_MEASUREMENT_RD_SIZE);
> }
>
> static int hsc_spi_probe(struct spi_device *spi)
