'pclk' is only used locally in the probe. Remove it from the 'synquacer_i2c' structure. Also remove a useless debug message. Signed-off-by: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx> --- drivers/i2c/busses/i2c-synquacer.c | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-) diff --git a/drivers/i2c/busses/i2c-synquacer.c b/drivers/i2c/busses/i2c-synquacer.c index a73f5bb9a164..e774b9f499b6 100644 --- a/drivers/i2c/busses/i2c-synquacer.c +++ b/drivers/i2c/busses/i2c-synquacer.c @@ -138,7 +138,6 @@ struct synquacer_i2c { int irq; struct device *dev; void __iomem *base; - struct clk *pclk; u32 pclkrate; u32 speed_khz; u32 timeout_ms; @@ -535,6 +534,7 @@ static const struct i2c_adapter synquacer_i2c_ops = { static int synquacer_i2c_probe(struct platform_device *pdev) { struct synquacer_i2c *i2c; + struct clk *pclk; u32 bus_speed; int ret; @@ -550,13 +550,12 @@ static int synquacer_i2c_probe(struct platform_device *pdev) device_property_read_u32(&pdev->dev, "socionext,pclk-rate", &i2c->pclkrate); - i2c->pclk = devm_clk_get_enabled(&pdev->dev, "pclk"); - if (IS_ERR(i2c->pclk)) - return dev_err_probe(&pdev->dev, PTR_ERR(i2c->pclk), + pclk = devm_clk_get_enabled(&pdev->dev, "pclk"); + if (IS_ERR(pclk)) + return dev_err_probe(&pdev->dev, PTR_ERR(pclk), "failed to get and enable clock\n"); - dev_dbg(&pdev->dev, "clock source %p\n", i2c->pclk); - i2c->pclkrate = clk_get_rate(i2c->pclk); + i2c->pclkrate = clk_get_rate(pclk); if (i2c->pclkrate < SYNQUACER_I2C_MIN_CLK_RATE || i2c->pclkrate > SYNQUACER_I2C_MAX_CLK_RATE) -- 2.34.1