jh71x0_clk_mux_determine_rate() is the same as __clk_mux_determine_rate(),
so use the latter to save some LoC.
Signed-off-by: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
---
drivers/clk/starfive/clk-starfive-jh71x0.c | 10 ++--------
1 file changed, 2 insertions(+), 8 deletions(-)
diff --git a/drivers/clk/starfive/clk-starfive-jh71x0.c b/drivers/clk/starfive/clk-starfive-jh71x0.c
index b372083d11c3..aebc99264a0b 100644
--- a/drivers/clk/starfive/clk-starfive-jh71x0.c
+++ b/drivers/clk/starfive/clk-starfive-jh71x0.c
@@ -174,12 +174,6 @@ static int jh71x0_clk_set_parent(struct clk_hw *hw, u8 index)
return 0;
}
-static int jh71x0_clk_mux_determine_rate(struct clk_hw *hw,
- struct clk_rate_request *req)
-{
- return clk_mux_determine_rate_flags(hw, req, 0);
-}
-
static int jh71x0_clk_get_phase(struct clk_hw *hw)
{
struct jh71x0_clk *clk = jh71x0_clk_from(hw);
@@ -261,7 +255,7 @@ static const struct clk_ops jh71x0_clk_gdiv_ops = {
};
static const struct clk_ops jh71x0_clk_mux_ops = {
- .determine_rate = jh71x0_clk_mux_determine_rate,
+ .determine_rate = __clk_mux_determine_rate,
.set_parent = jh71x0_clk_set_parent,
.get_parent = jh71x0_clk_get_parent,
.debug_init = jh71x0_clk_debug_init,
@@ -271,7 +265,7 @@ static const struct clk_ops jh71x0_clk_gmux_ops = {
.enable = jh71x0_clk_enable,
.disable = jh71x0_clk_disable,
.is_enabled = jh71x0_clk_is_enabled,
- .determine_rate = jh71x0_clk_mux_determine_rate,
+ .determine_rate = __clk_mux_determine_rate,
.set_parent = jh71x0_clk_set_parent,
.get_parent = jh71x0_clk_get_parent,
.debug_init = jh71x0_clk_debug_init,
--
2.34.1
