[PATCH] watchdog: realtek_otto: Use devm_clk_get_enabled() helper

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The devm_clk_get_enabled() helper:
   - calls devm_clk_get()
   - calls clk_prepare_enable() and registers what is needed in order to
     call clk_disable_unprepare() when needed, as a managed resource.

This simplifies the code and avoids the need of a dedicated function used
with devm_add_action_or_reset().

Signed-off-by: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
---
 drivers/watchdog/realtek_otto_wdt.c | 17 ++---------------
 1 file changed, 2 insertions(+), 15 deletions(-)

diff --git a/drivers/watchdog/realtek_otto_wdt.c b/drivers/watchdog/realtek_otto_wdt.c
index 2a5298c5e8e4..2c30ddd574c5 100644
--- a/drivers/watchdog/realtek_otto_wdt.c
+++ b/drivers/watchdog/realtek_otto_wdt.c
@@ -235,27 +235,14 @@ static const struct watchdog_info otto_wdt_info = {
 		WDIOF_PRETIMEOUT,
 };
 
-static void otto_wdt_clock_action(void *data)
-{
-	clk_disable_unprepare(data);
-}
-
 static int otto_wdt_probe_clk(struct otto_wdt_ctrl *ctrl)
 {
-	struct clk *clk = devm_clk_get(ctrl->dev, NULL);
-	int ret;
+	struct clk *clk;
 
+	clk = devm_clk_get_enabled(ctrl->dev, NULL);
 	if (IS_ERR(clk))
 		return dev_err_probe(ctrl->dev, PTR_ERR(clk), "Failed to get clock\n");
 
-	ret = clk_prepare_enable(clk);
-	if (ret)
-		return dev_err_probe(ctrl->dev, ret, "Failed to enable clock\n");
-
-	ret = devm_add_action_or_reset(ctrl->dev, otto_wdt_clock_action, clk);
-	if (ret)
-		return ret;
-
 	ctrl->clk_rate_khz = clk_get_rate(clk) / 1000;
 	if (ctrl->clk_rate_khz == 0)
 		return dev_err_probe(ctrl->dev, -ENXIO, "Failed to get clock rate\n");
-- 
2.34.1




[Index of Archives]     [Kernel Development]     [Kernel Announce]     [Kernel Newbies]     [Linux Networking Development]     [Share Photos]     [IDE]     [Security]     [Git]     [Netfilter]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Device Mapper]

  Powered by Linux