Re: [PATCH] hwspinlock: sprd: Use devm_clk_get_enabled() helper

[Baolin Wang <baolin.wang@xxxxxxxxxxxxxxxxx>]

On 8/24/2022 3:55 PM, Christophe JAILLET wrote:
> The devm_clk_get_enabled() helper:
>     - calls devm_clk_get()
>     - calls clk_prepare_enable() and registers what is needed in order to
>       call clk_disable_unprepare() when needed, as a managed resource.
>
> This simplifies the code, the error handling paths and avoid the need of
> a dedicated function used with devm_add_action_or_reset().
>
> Based on my test with allyesconfig, this reduces the .o size from:
>     text	   data	    bss	    dec	    hex	filename
>     3423	   1528	      0	   4951	   1357	drivers/hwspinlock/sprd_hwspinlock.o
> down to:
>     3025	   1392	      0	   4417	   1141	drivers/hwspinlock/sprd_hwspinlock.o
>
> Signed-off-by: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>

LGTM. Thanks.
Reviewed-by: Baolin Wang <baolin.wang@xxxxxxxxxxxxxxxxx>

> ---
> devm_clk_get_enabled() is new and is part of 6.0-rc1
> ---
>   drivers/hwspinlock/sprd_hwspinlock.c | 23 ++---------------------
>   1 file changed, 2 insertions(+), 21 deletions(-)
>
> diff --git a/drivers/hwspinlock/sprd_hwspinlock.c b/drivers/hwspinlock/sprd_hwspinlock.c
> index 22e2ffb91743..cb37706f61be 100644
> --- a/drivers/hwspinlock/sprd_hwspinlock.c
> +++ b/drivers/hwspinlock/sprd_hwspinlock.c
> @@ -76,18 +76,11 @@ static const struct hwspinlock_ops sprd_hwspinlock_ops = {
>   	.relax = sprd_hwspinlock_relax,
>   };
>   
> -static void sprd_hwspinlock_disable(void *data)
> -{
> -	struct sprd_hwspinlock_dev *sprd_hwlock = data;
> -
> -	clk_disable_unprepare(sprd_hwlock->clk);
> -}
> -
>   static int sprd_hwspinlock_probe(struct platform_device *pdev)
>   {
>   	struct sprd_hwspinlock_dev *sprd_hwlock;
>   	struct hwspinlock *lock;
> -	int i, ret;
> +	int i;
>   
>   	if (!pdev->dev.of_node)
>   		return -ENODEV;
> @@ -102,24 +95,12 @@ static int sprd_hwspinlock_probe(struct platform_device *pdev)
>   	if (IS_ERR(sprd_hwlock->base))
>   		return PTR_ERR(sprd_hwlock->base);
>   
> -	sprd_hwlock->clk = devm_clk_get(&pdev->dev, "enable");
> +	sprd_hwlock->clk = devm_clk_get_enabled(&pdev->dev, "enable");
>   	if (IS_ERR(sprd_hwlock->clk)) {
>   		dev_err(&pdev->dev, "get hwspinlock clock failed!\n");
>   		return PTR_ERR(sprd_hwlock->clk);
>   	}
>   
> -	ret = clk_prepare_enable(sprd_hwlock->clk);
> -	if (ret)
> -		return ret;
> -
> -	ret = devm_add_action_or_reset(&pdev->dev, sprd_hwspinlock_disable,
> -				       sprd_hwlock);
> -	if (ret) {
> -		dev_err(&pdev->dev,
> -			"Failed to add hwspinlock disable action\n");
> -		return ret;
> -	}
> -
>   	/* set the hwspinlock to record user id to identify subsystems */
>   	writel(HWSPINLOCK_USER_BITS, sprd_hwlock->base + HWSPINLOCK_RECCTRL);
>