Re: [PATCH 1/2] stmmac: intel: Add a missing clk_disable_unprepare() call in intel_eth_pci_remove()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sat, Jul 30, 2022 at 08:19:47PM +0200, Christophe JAILLET wrote:
> Commit 09f012e64e4b ("stmmac: intel: Fix clock handling on error and remove
> paths") removed this clk_disable_unprepare()
> 
> This was partly revert by commit ac322f86b56c ("net: stmmac: Fix clock
> handling on remove path") which removed this clk_disable_unprepare()
> because:
> "
>    While unloading the dwmac-intel driver, clk_disable_unprepare() is
>    being called twice in stmmac_dvr_remove() and
>    intel_eth_pci_remove(). This causes kernel panic on the second call.
> "
> 
> However later on, commit 5ec55823438e8 ("net: stmmac: add clocks management
> for gmac driver") has updated stmmac_dvr_remove() which do not call
> clk_disable_unprepare() anymore.
> 
> So this call should now be called from intel_eth_pci_remove().

The correct way of fixing it (which might be very well end up functionally
the same as this patch), is to introduce ->quit() in struct stmmac_pci_info
and assign it correctly, because not all platforms enable clocks.

Perhaps, we may leave this patch as is (for the sake of easy backporting) and
apply another one as I explained above to avoid similar mistakes in the future.

Reviewed-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>

> Fixes: 5ec55823438e8 ("net: stmmac: add clocks management for gmac driver")
> Signed-off-by: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
> ---
> /!\     This patch is HIGHLY speculative.     /!\
> 
> The corresponding clk_disable_unprepare() is still called within the pm
> related stmmac_bus_clks_config() function.
> 
> However, with my limited understanding of the pm API, I think it that the
> patch is valid.
> (in other word, does the pm_runtime_put() and/or pm_runtime_disable()
> and/or stmmac_dvr_remove() can end up calling .runtime_suspend())
> 
> So please review with care, as I'm not able to test the change by myself.
> 
> 
> If I'm wrong, maybe a comment explaining why it is safe to have this
> call in the error handling path of the probe and not in the remove function
> would avoid erroneous patches generated from static code analyzer to be
> sent.
> ---
>  drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c
> index 52f9ed8db9c9..9f38642f86ce 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c
> @@ -1134,6 +1134,7 @@ static void intel_eth_pci_remove(struct pci_dev *pdev)
>  
>  	stmmac_dvr_remove(&pdev->dev);
>  
> +	clk_disable_unprepare(plat->stmmac_clk);
>  	clk_unregister_fixed_rate(priv->plat->stmmac_clk);
>  
>  	pcim_iounmap_regions(pdev, BIT(0));
> -- 
> 2.34.1
> 

-- 
With Best Regards,
Andy Shevchenko





[Index of Archives]     [Kernel Development]     [Kernel Announce]     [Kernel Newbies]     [Linux Networking Development]     [Share Photos]     [IDE]     [Security]     [Git]     [Netfilter]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Device Mapper]

  Powered by Linux