Most of the time the 'min' and 'max' parameters of usleep_range() are constant. We can take advantage of it to pre-compute at compile time some values otherwise computed at run-time in usleep_range_state(). Replace usleep_range_state() by a new __nsleep_range_delta_state() function that takes as parameters the pre-computed values. The main benefit is to save a few instructions, especially 2 multiplications (x1000 when converting us to ns). Some hand simplified diff of the generated asm are given below. They were produced on a Intel(R) Core(TM) i7-3770, with gcc 11.2.0. drivers/clk/clk-si514.c (taken as an example) ----------------------- In this driver we have: usleep_range(10000, 12000); ea0: 45 85 e4 test %r12d,%r12d ea3: 0f 88 f6 fc ff ff js b9f <si514_set_rate+0x9f> ea9: e8 00 00 00 00 call eae <si514_set_rate+0x3ae> - eae: be e0 2e 00 00 mov $0x2ee0,%esi ; 12.000 - eb3: bf 10 27 00 00 mov $0x2710,%edi ; 10.000 + eae: be 80 84 1e 00 mov $0x1e8480,%esi ; 2.000.000 + eb3: bf 80 96 98 00 mov $0x989680,%edi ; 10.000.000 eb8: ba 02 00 00 00 mov $0x2,%edx ebd: e8 00 00 00 00 call ec2 <si514_set_rate+0x3c2> ec2: 44 8b 74 24 30 mov 0x30(%rsp),%r14d The asm produced in the caller is mostly the same. Only constant values passed to usleep_range_state() or __nsleep_range_delta_state() are different. No other instructions or whatever is different. kernel/time/timer.c ------------------- -0000000000000000 <usleep_range_state>: +0000000000000000 <__nsleep_range_delta_state>: f3 0f 1e fa endbr64 e8 00 00 00 00 call ... 48 b8 00 00 00 00 00 movabs $0xdffffc0000000000,%rax [...] 41 56 push %r14 49 c7 c6 00 00 00 00 mov $0x0,%r14 41 55 push %r13 - 41 89 d5 mov %edx,%r13d + 49 89 f5 mov %rsi,%r13 41 54 push %r12 - 49 89 f4 mov %rsi,%r12 + 41 89 d4 mov %edx,%r12d 55 push %rbp - 44 89 ed mov %r13d,%ebp + 44 89 e5 mov %r12d,%ebp 53 push %rbx 48 89 fb mov %rdi,%rbx 81 e5 cc 00 00 00 and $0xcc,%ebp - 49 29 dc sub %rbx,%r12 ; (max - min) - 4d 69 e4 e8 03 00 00 imul $0x3e8,%r12,%r12 ; us --> ns (x 1000) 48 83 ec 68 sub $0x68,%rsp 48 c7 44 24 08 b3 8a movq $0x41b58ab3,0x8(%rsp) b5 41 [...] 31 c0 xor %eax,%eax e8 00 00 00 00 call ... e8 00 00 00 00 call ... - 49 89 c0 mov %rax,%r8 - 48 69 c3 e8 03 00 00 imul $0x3e8,%rbx,%rax ; us --> ns (x 1000) + 48 01 d8 add %rbx,%rax + 48 89 44 24 28 mov %rax,0x28(%rsp) 65 48 8b 1c 25 00 00 mov %gs:0x0,%rbx 00 00 - 4c 01 c0 add %r8,%rax - 48 89 44 24 28 mov %rax,0x28(%rsp) e8 00 00 00 00 call ... 31 ff xor %edi,%edi 89 ee mov %ebp,%esi Signed-off-by: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx> Acked-by: John Stultz <jstultz@xxxxxxxxxx> --- v1 -> v2 - Simplify and avoid use of __buildint_constant_p() [John Stultz <jstultz@xxxxxxxxxx>] - Also update usleep_idle_range() - Axe usleep_range_state() [John Stultz <jstultz@xxxxxxxxxx>] - Fix kerneldoc [John Stultz <jstultz@xxxxxxxxxx>] - Update log message accordingly https://lore.kernel.org/all/d7fc85736adee02ce52ee88a54fa7477fbd18ed2.1653236802.git.christophe.jaillet@xxxxxxxxxx/ v2 -> v3 - Fix checkpatch warning/error [John Stultz <jstultz@xxxxxxxxxx>] - Add SoB https://lore.kernel.org/all/a896e176f0f0b819f8ec5ab8935355d01a642506.1659126514.git.christophe.jaillet@xxxxxxxxxx/ --- include/linux/delay.h | 17 +++++++++++++---- kernel/time/timer.c | 17 ++++++++--------- 2 files changed, 21 insertions(+), 13 deletions(-) diff --git a/include/linux/delay.h b/include/linux/delay.h index 039e7e0c7378..27938a49c701 100644 --- a/include/linux/delay.h +++ b/include/linux/delay.h @@ -59,17 +59,26 @@ void calibrate_delay(void); void __attribute__((weak)) calibration_delay_done(void); void msleep(unsigned int msecs); unsigned long msleep_interruptible(unsigned int msecs); -void usleep_range_state(unsigned long min, unsigned long max, - unsigned int state); +void __nsleep_range_delta_state(u64 min, u64 delta, unsigned int state); static inline void usleep_range(unsigned long min, unsigned long max) { - usleep_range_state(min, max, TASK_UNINTERRUPTIBLE); + /* + * Most of the time min and max are constant, so the time delta and the + * conversion to ns will be optimized-out at compile time. + */ + u64 delta = (u64)(max - min) * NSEC_PER_USEC; + + __nsleep_range_delta_state(min * NSEC_PER_USEC, delta, + TASK_UNINTERRUPTIBLE); } static inline void usleep_idle_range(unsigned long min, unsigned long max) { - usleep_range_state(min, max, TASK_IDLE); + u64 delta = (u64)(max - min) * NSEC_PER_USEC; + + __nsleep_range_delta_state(min * NSEC_PER_USEC, delta, + TASK_IDLE); } static inline void ssleep(unsigned int seconds) diff --git a/kernel/time/timer.c b/kernel/time/timer.c index 717fcb9fb14a..475b1c0406d7 100644 --- a/kernel/time/timer.c +++ b/kernel/time/timer.c @@ -2109,22 +2109,21 @@ unsigned long msleep_interruptible(unsigned int msecs) EXPORT_SYMBOL(msleep_interruptible); /** - * usleep_range_state - Sleep for an approximate time in a given state - * @min: Minimum time in usecs to sleep - * @max: Maximum time in usecs to sleep + * __nsleep_range_delta_state - Sleep for an approximate time in a given state + * @min: Minimum time in nsecs to sleep + * @delta: Duration in nsecs that can be tolerated after @min * @state: State of the current task that will be while sleeping * * In non-atomic context where the exact wakeup time is flexible, use - * usleep_range_state() instead of udelay(). The sleep improves responsiveness + * usleep_[idle_]range() instead of udelay(). The sleep improves responsiveness * by avoiding the CPU-hogging busy-wait of udelay(), and the range reduces * power usage by allowing hrtimers to take advantage of an already- * scheduled interrupt instead of scheduling a new one just for this sleep. */ -void __sched usleep_range_state(unsigned long min, unsigned long max, - unsigned int state) +void __sched __nsleep_range_delta_state(u64 min, u64 delta, + unsigned int state) { - ktime_t exp = ktime_add_us(ktime_get(), min); - u64 delta = (u64)(max - min) * NSEC_PER_USEC; + ktime_t exp = ktime_add_ns(ktime_get(), min); for (;;) { __set_current_state(state); @@ -2133,4 +2132,4 @@ void __sched usleep_range_state(unsigned long min, unsigned long max, break; } } -EXPORT_SYMBOL(usleep_range_state); +EXPORT_SYMBOL(__nsleep_range_delta_state); -- 2.34.1
