The clsk are prepared, enabled, then disabled. So if an error occurs after
the disable step, they are still prepared.
Add an error handling path to unprepare the clks in such a case, as already
done in the .remove function.
Fixes: 8b4fc246c3ff ("i2c: mediatek: Optimize master_xfer() and avoid circular locking")
Signed-off-by: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
---
drivers/i2c/busses/i2c-mt65xx.c | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)
diff --git a/drivers/i2c/busses/i2c-mt65xx.c b/drivers/i2c/busses/i2c-mt65xx.c
index bdecb78bfc26..8e6985354fd5 100644
--- a/drivers/i2c/busses/i2c-mt65xx.c
+++ b/drivers/i2c/busses/i2c-mt65xx.c
@@ -1420,17 +1420,22 @@ static int mtk_i2c_probe(struct platform_device *pdev)
if (ret < 0) {
dev_err(&pdev->dev,
"Request I2C IRQ %d fail\n", irq);
- return ret;
+ goto err_bulk_unprepare;
}
i2c_set_adapdata(&i2c->adap, i2c);
ret = i2c_add_adapter(&i2c->adap);
if (ret)
- return ret;
+ goto err_bulk_unprepare;
platform_set_drvdata(pdev, i2c);
return 0;
+
+err_bulk_unprepare:
+ clk_bulk_unprepare(I2C_MT65XX_CLK_MAX, i2c->clocks);
+
+ return ret;
}
static int mtk_i2c_remove(struct platform_device *pdev)
--
2.34.1
