Re: [PATCH] [ARM] orion5x: fix typos in comments

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Julia Lawall <Julia.Lawall@xxxxxxxx> writes:

> Various spelling mistakes in comments.
> Detected with the help of Coccinelle.
>
> Signed-off-by: Julia Lawall <Julia.Lawall@xxxxxxxx>

Applied on mvebu/arm

Thanks,

Gregory
>
> ---
>  arch/arm/mach-orion5x/dns323-setup.c |    4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c
> index 87cb47220e82..d69259b6b60d 100644
> --- a/arch/arm/mach-orion5x/dns323-setup.c
> +++ b/arch/arm/mach-orion5x/dns323-setup.c
> @@ -696,12 +696,12 @@ static void __init dns323_init(void)
>  			pr_err("DNS-323: failed to setup power-off GPIO\n");
>  		pm_power_off = dns323c_power_off;
>  
> -		/* Now, -this- should theorically be done by the sata_mv driver
> +		/* Now, -this- should theoretically be done by the sata_mv driver
>  		 * once I figure out what's going on there. Maybe the behaviour
>  		 * of the LEDs should be somewhat passed via the platform_data.
>  		 * for now, just whack the register and make the LEDs happy
>  		 *
> -		 * Note: AFAIK, rev B1 needs the same treatement but I'll let
> +		 * Note: AFAIK, rev B1 needs the same treatment but I'll let
>  		 * somebody else test it.
>  		 */
>  		writel(0x5, ORION5X_SATA_VIRT_BASE + 0x2c);
>

-- 
Gregory Clement, Bootlin
Embedded Linux and Kernel engineering
http://bootlin.com



[Index of Archives]     [Kernel Development]     [Kernel Announce]     [Kernel Newbies]     [Linux Networking Development]     [Share Photos]     [IDE]     [Security]     [Git]     [Netfilter]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Device Mapper]

  Powered by Linux