On Sat, 30 Apr 2022 at 18:58, Julia Lawall <Julia.Lawall@xxxxxxxx> wrote:
>
> Various spelling mistakes in comments.
> Detected with the help of Coccinelle.
>
> Signed-off-by: Julia Lawall <Julia.Lawall@xxxxxxxx>
I read the patch and it appears that all of the corrections are good.
Thanks for sending it Julia.
I'm not sure that one mega patch is the right way to go or not, so
I'll leave that to mpe.
Reviewed-by: Joel Stanley <joel@xxxxxxxxx>
>
> ---
> arch/powerpc/boot/cuboot-hotfoot.c | 2 +-
> arch/powerpc/crypto/aes-spe-glue.c | 2 +-
> arch/powerpc/kernel/cputable.c | 2 +-
> arch/powerpc/kernel/dawr.c | 2 +-
> arch/powerpc/kernel/eeh.c | 4 ++--
> arch/powerpc/kernel/eeh_event.c | 2 +-
> arch/powerpc/kernel/fadump.c | 10 +++++-----
> arch/powerpc/kernel/module_32.c | 2 +-
> arch/powerpc/kernel/module_64.c | 4 ++--
> arch/powerpc/kernel/pci-common.c | 2 +-
> arch/powerpc/kernel/pci_of_scan.c | 2 +-
> arch/powerpc/kernel/process.c | 4 ++--
> arch/powerpc/kernel/prom_init.c | 2 +-
> arch/powerpc/kernel/ptrace/ptrace-view.c | 2 +-
> arch/powerpc/kernel/rtas_flash.c | 2 +-
> arch/powerpc/kernel/setup-common.c | 2 +-
> arch/powerpc/kernel/signal_64.c | 2 +-
> arch/powerpc/kernel/smp.c | 2 +-
> arch/powerpc/kernel/time.c | 4 ++--
> arch/powerpc/kernel/watchdog.c | 2 +-
> arch/powerpc/kexec/core_64.c | 2 +-
> arch/powerpc/kvm/book3s_64_mmu_hv.c | 2 +-
> arch/powerpc/kvm/book3s_64_vio_hv.c | 2 +-
> arch/powerpc/kvm/book3s_emulate.c | 2 +-
> arch/powerpc/kvm/book3s_hv_p9_entry.c | 2 +-
> arch/powerpc/kvm/book3s_hv_uvmem.c | 2 +-
> arch/powerpc/kvm/book3s_pr.c | 2 +-
> arch/powerpc/kvm/book3s_xics.c | 2 +-
> arch/powerpc/kvm/book3s_xive.c | 6 +++---
> arch/powerpc/kvm/e500mc.c | 2 +-
> arch/powerpc/mm/book3s64/hash_pgtable.c | 2 +-
> arch/powerpc/mm/book3s64/hash_utils.c | 4 ++--
> arch/powerpc/mm/book3s64/pgtable.c | 2 +-
> arch/powerpc/mm/book3s64/radix_pgtable.c | 2 +-
> arch/powerpc/mm/book3s64/radix_tlb.c | 2 +-
> arch/powerpc/mm/book3s64/slb.c | 4 ++--
> arch/powerpc/mm/init_64.c | 4 ++--
> arch/powerpc/mm/nohash/book3e_hugetlbpage.c | 2 +-
> arch/powerpc/mm/nohash/kaslr_booke.c | 2 +-
> arch/powerpc/mm/pgtable-frag.c | 2 +-
> arch/powerpc/perf/8xx-pmu.c | 2 +-
> arch/powerpc/perf/core-book3s.c | 6 +++---
> arch/powerpc/perf/imc-pmu.c | 4 ++--
> arch/powerpc/perf/isa207-common.c | 6 +++---
> arch/powerpc/platforms/512x/clock-commonclk.c | 2 +-
> arch/powerpc/platforms/512x/mpc512x_shared.c | 2 +-
> arch/powerpc/platforms/52xx/mpc52xx_common.c | 2 +-
> arch/powerpc/platforms/52xx/mpc52xx_gpt.c | 2 +-
> arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c | 2 +-
> arch/powerpc/platforms/85xx/mpc85xx_cds.c | 2 +-
> arch/powerpc/platforms/86xx/gef_ppc9a.c | 2 +-
> arch/powerpc/platforms/86xx/gef_sbc310.c | 2 +-
> arch/powerpc/platforms/86xx/gef_sbc610.c | 2 +-
> arch/powerpc/platforms/book3s/vas-api.c | 2 +-
> arch/powerpc/platforms/cell/cbe_regs.c | 2 +-
> arch/powerpc/platforms/cell/iommu.c | 2 +-
> arch/powerpc/platforms/cell/spider-pci.c | 2 +-
> arch/powerpc/platforms/cell/spu_manage.c | 2 +-
> arch/powerpc/platforms/powermac/low_i2c.c | 2 +-
> arch/powerpc/platforms/powernv/eeh-powernv.c | 10 +++++-----
> arch/powerpc/platforms/powernv/idle.c | 4 ++--
> arch/powerpc/platforms/powernv/ocxl.c | 2 +-
> arch/powerpc/platforms/powernv/opal-fadump.c | 2 +-
> arch/powerpc/platforms/powernv/opal-lpc.c | 2 +-
> arch/powerpc/platforms/powernv/opal-memory-errors.c | 2 +-
> arch/powerpc/platforms/powernv/pci-sriov.c | 2 +-
> arch/powerpc/platforms/ps3/mm.c | 2 +-
> arch/powerpc/platforms/ps3/system-bus.c | 2 +-
> arch/powerpc/platforms/pseries/eeh_pseries.c | 2 +-
> arch/powerpc/platforms/pseries/iommu.c | 2 +-
> arch/powerpc/platforms/pseries/setup.c | 4 ++--
> arch/powerpc/platforms/pseries/vas-sysfs.c | 2 +-
> arch/powerpc/platforms/pseries/vas.c | 2 +-
> arch/powerpc/sysdev/fsl_lbc.c | 2 +-
> arch/powerpc/sysdev/fsl_pci.c | 2 +-
> arch/powerpc/sysdev/ge/ge_pic.c | 2 +-
> arch/powerpc/sysdev/mpic_msgr.c | 2 +-
> arch/powerpc/sysdev/mpic_msi.c | 2 +-
> arch/powerpc/sysdev/mpic_timer.c | 2 +-
> arch/powerpc/sysdev/mpic_u3msi.c | 2 +-
> arch/powerpc/sysdev/xive/native.c | 2 +-
> arch/powerpc/xmon/ppc-opc.c | 2 +-
> arch/powerpc/xmon/xmon.c | 2 +-
> 83 files changed, 107 insertions(+), 107 deletions(-)
>
> diff --git a/arch/powerpc/kvm/book3s_64_mmu_hv.c b/arch/powerpc/kvm/book3s_64_mmu_hv.c
> index 0aeb51738ca9..1137c4df726c 100644
> --- a/arch/powerpc/kvm/book3s_64_mmu_hv.c
> +++ b/arch/powerpc/kvm/book3s_64_mmu_hv.c
> @@ -58,7 +58,7 @@ struct kvm_resize_hpt {
> /* Possible values and their usage:
> * <0 an error occurred during allocation,
> * -EBUSY allocation is in the progress,
> - * 0 allocation made successfuly.
> + * 0 allocation made successfully.
> */
> int error;
>
> diff --git a/arch/powerpc/kvm/book3s_64_vio_hv.c b/arch/powerpc/kvm/book3s_64_vio_hv.c
> index fdeda6a9cff4..fdcc7b287dd8 100644
> --- a/arch/powerpc/kvm/book3s_64_vio_hv.c
> +++ b/arch/powerpc/kvm/book3s_64_vio_hv.c
> @@ -453,7 +453,7 @@ static long kvmppc_rm_ua_to_hpa(struct kvm_vcpu *vcpu, unsigned long mmu_seq,
> * we are doing this on secondary cpus and current task there
> * is not the hypervisor. Also this is safe against THP in the
> * host, because an IPI to primary thread will wait for the secondary
> - * to exit which will agains result in the below page table walk
> + * to exit which will again result in the below page table walk
> * to finish.
> */
> /* an rmap lock won't make it safe. because that just ensure hash
> diff --git a/arch/powerpc/kvm/book3s_emulate.c b/arch/powerpc/kvm/book3s_emulate.c
> index fdb57be71aa6..5bbfb2eed127 100644
> --- a/arch/powerpc/kvm/book3s_emulate.c
> +++ b/arch/powerpc/kvm/book3s_emulate.c
> @@ -268,7 +268,7 @@ int kvmppc_core_emulate_op_pr(struct kvm_vcpu *vcpu,
>
> /*
> * add rules to fit in ISA specification regarding TM
> - * state transistion in TM disable/Suspended state,
> + * state transition in TM disable/Suspended state,
> * and target TM state is TM inactive(00) state. (the
> * change should be suppressed).
> */
> diff --git a/arch/powerpc/kvm/book3s_hv_p9_entry.c b/arch/powerpc/kvm/book3s_hv_p9_entry.c
> index a28e5b3daabd..ac38c1cad378 100644
> --- a/arch/powerpc/kvm/book3s_hv_p9_entry.c
> +++ b/arch/powerpc/kvm/book3s_hv_p9_entry.c
> @@ -379,7 +379,7 @@ void restore_p9_host_os_sprs(struct kvm_vcpu *vcpu,
> {
> /*
> * current->thread.xxx registers must all be restored to host
> - * values before a potential context switch, othrewise the context
> + * values before a potential context switch, otherwise the context
> * switch itself will overwrite current->thread.xxx with the values
> * from the guest SPRs.
> */
> diff --git a/arch/powerpc/kvm/book3s_hv_uvmem.c b/arch/powerpc/kvm/book3s_hv_uvmem.c
> index 45c993dd05f5..0f66f7fbfb80 100644
> --- a/arch/powerpc/kvm/book3s_hv_uvmem.c
> +++ b/arch/powerpc/kvm/book3s_hv_uvmem.c
> @@ -120,7 +120,7 @@ static DEFINE_SPINLOCK(kvmppc_uvmem_bitmap_lock);
> * content is un-encrypted.
> *
> * (c) Normal - The GFN is a normal. The GFN is associated with
> - * a normal VM. The contents of the GFN is accesible to
> + * a normal VM. The contents of the GFN is accessible to
> * the Hypervisor. Its content is never encrypted.
> *
> * States of a VM.
> diff --git a/arch/powerpc/kvm/book3s_pr.c b/arch/powerpc/kvm/book3s_pr.c
> index 7bf9e6ca5c2d..d6abed6e51e6 100644
> --- a/arch/powerpc/kvm/book3s_pr.c
> +++ b/arch/powerpc/kvm/book3s_pr.c
> @@ -1287,7 +1287,7 @@ int kvmppc_handle_exit_pr(struct kvm_vcpu *vcpu, unsigned int exit_nr)
>
> /* Get last sc for papr */
> if (vcpu->arch.papr_enabled) {
> - /* The sc instuction points SRR0 to the next inst */
> + /* The sc instruction points SRR0 to the next inst */
> emul = kvmppc_get_last_inst(vcpu, INST_SC, &last_sc);
> if (emul != EMULATE_DONE) {
> kvmppc_set_pc(vcpu, kvmppc_get_pc(vcpu) - 4);
> diff --git a/arch/powerpc/kvm/book3s_xics.c b/arch/powerpc/kvm/book3s_xics.c
> index ab6d37d78c62..589a8f257120 100644
> --- a/arch/powerpc/kvm/book3s_xics.c
> +++ b/arch/powerpc/kvm/book3s_xics.c
> @@ -462,7 +462,7 @@ static void icp_deliver_irq(struct kvmppc_xics *xics, struct kvmppc_icp *icp,
> * new guy. We cannot assume that the rejected interrupt is less
> * favored than the new one, and thus doesn't need to be delivered,
> * because by the time we exit icp_try_to_deliver() the target
> - * processor may well have alrady consumed & completed it, and thus
> + * processor may well have already consumed & completed it, and thus
> * the rejected interrupt might actually be already acceptable.
> */
> if (icp_try_to_deliver(icp, new_irq, state->priority, &reject)) {
> diff --git a/arch/powerpc/kvm/book3s_xive.c b/arch/powerpc/kvm/book3s_xive.c
> index c0ce5531d9bc..24d434f1f012 100644
> --- a/arch/powerpc/kvm/book3s_xive.c
> +++ b/arch/powerpc/kvm/book3s_xive.c
> @@ -124,7 +124,7 @@ void kvmppc_xive_push_vcpu(struct kvm_vcpu *vcpu)
> * interrupt might have fired and be on its way to the
> * host queue while we mask it, and if we unmask it
> * early enough (re-cede right away), there is a
> - * theorical possibility that it fires again, thus
> + * theoretical possibility that it fires again, thus
> * landing in the target queue more than once which is
> * a big no-no.
> *
> @@ -622,7 +622,7 @@ static int xive_target_interrupt(struct kvm *kvm,
>
> /*
> * Targetting rules: In order to avoid losing track of
> - * pending interrupts accross mask and unmask, which would
> + * pending interrupts across mask and unmask, which would
> * allow queue overflows, we implement the following rules:
> *
> * - Unless it was never enabled (or we run out of capacity)
> @@ -1073,7 +1073,7 @@ int kvmppc_xive_clr_mapped(struct kvm *kvm, unsigned long guest_irq,
> /*
> * If old_p is set, the interrupt is pending, we switch it to
> * PQ=11. This will force a resend in the host so the interrupt
> - * isn't lost to whatver host driver may pick it up
> + * isn't lost to whatever host driver may pick it up
> */
> if (state->old_p)
> xive_vm_esb_load(state->pt_data, XIVE_ESB_SET_PQ_11);
> diff --git a/arch/powerpc/kvm/e500mc.c b/arch/powerpc/kvm/e500mc.c
> index fa0d8dbbe484..4ff1372e48d4 100644
> --- a/arch/powerpc/kvm/e500mc.c
> +++ b/arch/powerpc/kvm/e500mc.c
> @@ -309,7 +309,7 @@ static int kvmppc_core_vcpu_create_e500mc(struct kvm_vcpu *vcpu)
> BUILD_BUG_ON(offsetof(struct kvmppc_vcpu_e500, vcpu) != 0);
> vcpu_e500 = to_e500(vcpu);
>
> - /* Invalid PIR value -- this LPID dosn't have valid state on any cpu */
> + /* Invalid PIR value -- this LPID doesn't have valid state on any cpu */
> vcpu->arch.oldpir = 0xffffffff;
>
> err = kvmppc_e500_tlb_init(vcpu_e500);
> diff --git a/arch/powerpc/kernel/eeh.c b/arch/powerpc/kernel/eeh.c
> index 28bb1e7263a6..ab316e155ea9 100644
> --- a/arch/powerpc/kernel/eeh.c
> +++ b/arch/powerpc/kernel/eeh.c
> @@ -1329,7 +1329,7 @@ int eeh_pe_set_option(struct eeh_pe *pe, int option)
>
> /*
> * EEH functionality could possibly be disabled, just
> - * return error for the case. And the EEH functinality
> + * return error for the case. And the EEH functionality
> * isn't expected to be disabled on one specific PE.
> */
> switch (option) {
> @@ -1804,7 +1804,7 @@ static int eeh_debugfs_break_device(struct pci_dev *pdev)
> * PE freeze. Using the in_8() accessor skips the eeh detection hook
> * so the freeze hook so the EEH Detection machinery won't be
> * triggered here. This is to match the usual behaviour of EEH
> - * where the HW will asyncronously freeze a PE and it's up to
> + * where the HW will asynchronously freeze a PE and it's up to
> * the kernel to notice and deal with it.
> *
> * 3. Turn Memory space back on. This is more important for VFs
> diff --git a/arch/powerpc/kernel/eeh_event.c b/arch/powerpc/kernel/eeh_event.c
> index a7a8dc182efb..c23a454af08a 100644
> --- a/arch/powerpc/kernel/eeh_event.c
> +++ b/arch/powerpc/kernel/eeh_event.c
> @@ -143,7 +143,7 @@ int __eeh_send_failure_event(struct eeh_pe *pe)
> int eeh_send_failure_event(struct eeh_pe *pe)
> {
> /*
> - * If we've manually supressed recovery events via debugfs
> + * If we've manually suppressed recovery events via debugfs
> * then just drop it on the floor.
> */
> if (eeh_debugfs_no_recover) {
> diff --git a/arch/powerpc/platforms/powernv/eeh-powernv.c b/arch/powerpc/platforms/powernv/eeh-powernv.c
> index 89e22c460ebf..33f7b959c810 100644
> --- a/arch/powerpc/platforms/powernv/eeh-powernv.c
> +++ b/arch/powerpc/platforms/powernv/eeh-powernv.c
> @@ -390,7 +390,7 @@ static struct eeh_dev *pnv_eeh_probe(struct pci_dev *pdev)
> * should be blocked until PE reset. MMIO access is dropped
> * by hardware certainly. In order to drop PCI config requests,
> * one more flag (EEH_PE_CFG_RESTRICTED) is introduced, which
> - * will be checked in the backend for PE state retrival. If
> + * will be checked in the backend for PE state retrieval. If
> * the PE becomes frozen for the first time and the flag has
> * been set for the PE, we will set EEH_PE_CFG_BLOCKED for
> * that PE to block its config space.
> @@ -981,7 +981,7 @@ static int pnv_eeh_do_af_flr(struct pci_dn *pdn, int option)
> case EEH_RESET_FUNDAMENTAL:
> /*
> * Wait for Transaction Pending bit to clear. A word-aligned
> - * test is used, so we use the conrol offset rather than status
> + * test is used, so we use the control offset rather than status
> * and shift the test bit to match.
> */
> pnv_eeh_wait_for_pending(pdn, "AF",
> @@ -1048,7 +1048,7 @@ static int pnv_eeh_reset(struct eeh_pe *pe, int option)
> * frozen state during PE reset. However, the good idea here from
> * benh is to keep frozen state before we get PE reset done completely
> * (until BAR restore). With the frozen state, HW drops illegal IO
> - * or MMIO access, which can incur recrusive frozen PE during PE
> + * or MMIO access, which can incur recursive frozen PE during PE
> * reset. The side effect is that EEH core has to clear the frozen
> * state explicitly after BAR restore.
> */
> @@ -1095,8 +1095,8 @@ static int pnv_eeh_reset(struct eeh_pe *pe, int option)
> * bus is behind a hotplug slot and it will use the slot provided
> * reset methods to prevent spurious hotplug events during the reset.
> *
> - * Fundemental resets need to be handled internally to EEH since the
> - * PCI core doesn't really have a concept of a fundemental reset,
> + * Fundamental resets need to be handled internally to EEH since the
> + * PCI core doesn't really have a concept of a fundamental reset,
> * mainly because there's no standard way to generate one. Only a
> * few devices require an FRESET so it should be fine.
> */
> diff --git a/arch/powerpc/platforms/pseries/eeh_pseries.c b/arch/powerpc/platforms/pseries/eeh_pseries.c
> index 09fafcf2d3a0..f0b2bca750da 100644
> --- a/arch/powerpc/platforms/pseries/eeh_pseries.c
> +++ b/arch/powerpc/platforms/pseries/eeh_pseries.c
> @@ -510,7 +510,7 @@ static int pseries_eeh_set_option(struct eeh_pe *pe, int option)
> int ret = 0;
>
> /*
> - * When we're enabling or disabling EEH functioality on
> + * When we're enabling or disabling EEH functionality on
> * the particular PE, the PE config address is possibly
> * unavailable. Therefore, we have to figure it out from
> * the FDT node.
> diff --git a/arch/powerpc/platforms/cell/cbe_regs.c b/arch/powerpc/platforms/cell/cbe_regs.c
> index 1c4c53bec66c..03512a41bd7e 100644
> --- a/arch/powerpc/platforms/cell/cbe_regs.c
> +++ b/arch/powerpc/platforms/cell/cbe_regs.c
> @@ -23,7 +23,7 @@
> * Current implementation uses "cpu" nodes. We build our own mapping
> * array of cpu numbers to cpu nodes locally for now to allow interrupt
> * time code to have a fast path rather than call of_get_cpu_node(). If
> - * we implement cpu hotplug, we'll have to install an appropriate norifier
> + * we implement cpu hotplug, we'll have to install an appropriate notifier
> * in order to release references to the cpu going away
> */
> static struct cbe_regs_map
> diff --git a/arch/powerpc/platforms/cell/iommu.c b/arch/powerpc/platforms/cell/iommu.c
> index 25e726bf0172..3f141cf5e580 100644
> --- a/arch/powerpc/platforms/cell/iommu.c
> +++ b/arch/powerpc/platforms/cell/iommu.c
> @@ -582,7 +582,7 @@ static int cell_of_bus_notify(struct notifier_block *nb, unsigned long action,
> {
> struct device *dev = data;
>
> - /* We are only intereted in device addition */
> + /* We are only interested in device addition */
> if (action != BUS_NOTIFY_ADD_DEVICE)
> return 0;
>
> diff --git a/arch/powerpc/platforms/cell/spider-pci.c b/arch/powerpc/platforms/cell/spider-pci.c
> index a1c293f42a1f..3a2ea8376e32 100644
> --- a/arch/powerpc/platforms/cell/spider-pci.c
> +++ b/arch/powerpc/platforms/cell/spider-pci.c
> @@ -81,7 +81,7 @@ static int __init spiderpci_pci_setup_chip(struct pci_controller *phb,
> /*
> * On CellBlade, we can't know that which XDR memory is used by
> * kmalloc() to allocate dummy_page_va.
> - * In order to imporve the performance, the XDR which is used to
> + * In order to improve the performance, the XDR which is used to
> * allocate dummy_page_va is the nearest the spider-pci.
> * We have to select the CBE which is the nearest the spider-pci
> * to allocate memory from the best XDR, but I don't know that
> diff --git a/arch/powerpc/platforms/cell/spu_manage.c b/arch/powerpc/platforms/cell/spu_manage.c
> index ddf8742f09a3..080ed2d2c682 100644
> --- a/arch/powerpc/platforms/cell/spu_manage.c
> +++ b/arch/powerpc/platforms/cell/spu_manage.c
> @@ -457,7 +457,7 @@ static void __init init_affinity_node(int cbe)
>
> /*
> * Walk through each phandle in vicinity property of the spu
> - * (tipically two vicinity phandles per spe node)
> + * (typically two vicinity phandles per spe node)
> */
> for (i = 0; i < (lenp / sizeof(phandle)); i++) {
> if (vic_handles[i] == avoid_ph)
> diff --git a/arch/powerpc/platforms/powermac/low_i2c.c b/arch/powerpc/platforms/powermac/low_i2c.c
> index df89d916236d..9aded0188ce8 100644
> --- a/arch/powerpc/platforms/powermac/low_i2c.c
> +++ b/arch/powerpc/platforms/powermac/low_i2c.c
> @@ -1472,7 +1472,7 @@ int __init pmac_i2c_init(void)
> smu_i2c_probe();
> #endif
>
> - /* Now add plaform functions for some known devices */
> + /* Now add platform functions for some known devices */
> pmac_i2c_devscan(pmac_i2c_dev_create);
>
> return 0;
> diff --git a/arch/powerpc/platforms/85xx/mpc85xx_cds.c b/arch/powerpc/platforms/85xx/mpc85xx_cds.c
> index 5bd487030256..ad0b88ecfd0c 100644
> --- a/arch/powerpc/platforms/85xx/mpc85xx_cds.c
> +++ b/arch/powerpc/platforms/85xx/mpc85xx_cds.c
> @@ -151,7 +151,7 @@ static void __init mpc85xx_cds_pci_irq_fixup(struct pci_dev *dev)
> */
> case PCI_DEVICE_ID_VIA_82C586_2:
> /* There are two USB controllers.
> - * Identify them by functon number
> + * Identify them by function number
> */
> if (PCI_FUNC(dev->devfn) == 3)
> dev->irq = 11;
> diff --git a/arch/powerpc/crypto/aes-spe-glue.c b/arch/powerpc/crypto/aes-spe-glue.c
> index c2b23b69d7b1..e8dfe9fb0266 100644
> --- a/arch/powerpc/crypto/aes-spe-glue.c
> +++ b/arch/powerpc/crypto/aes-spe-glue.c
> @@ -404,7 +404,7 @@ static int ppc_xts_decrypt(struct skcipher_request *req)
>
> /*
> * Algorithm definitions. Disabling alignment (cra_alignmask=0) was chosen
> - * because the e500 platform can handle unaligned reads/writes very efficently.
> + * because the e500 platform can handle unaligned reads/writes very efficiently.
> * This improves IPsec thoughput by another few percent. Additionally we assume
> * that AES context is always aligned to at least 8 bytes because it is created
> * with kmalloc() in the crypto infrastructure
> diff --git a/arch/powerpc/platforms/ps3/mm.c b/arch/powerpc/platforms/ps3/mm.c
> index 5ce924611b94..63ef61ed7597 100644
> --- a/arch/powerpc/platforms/ps3/mm.c
> +++ b/arch/powerpc/platforms/ps3/mm.c
> @@ -364,7 +364,7 @@ static void __maybe_unused _dma_dump_region(const struct ps3_dma_region *r,
> * @bus_addr: Starting ioc bus address of the area to map.
> * @len: Length in bytes of the area to map.
> * @link: A struct list_head used with struct ps3_dma_region.chunk_list, the
> - * list of all chuncks owned by the region.
> + * list of all chunks owned by the region.
> *
> * This implementation uses a very simple dma page manager
> * based on the dma_chunk structure. This scheme assumes
> diff --git a/arch/powerpc/platforms/ps3/system-bus.c b/arch/powerpc/platforms/ps3/system-bus.c
> index b637bf292047..2502e9b17df4 100644
> --- a/arch/powerpc/platforms/ps3/system-bus.c
> +++ b/arch/powerpc/platforms/ps3/system-bus.c
> @@ -601,7 +601,7 @@ static dma_addr_t ps3_ioc0_map_page(struct device *_dev, struct page *page,
> iopte_flag |= CBE_IOPTE_PP_W | CBE_IOPTE_SO_RW;
> break;
> default:
> - /* not happned */
> + /* not happened */
> BUG();
> }
> result = ps3_dma_map(dev->d_region, (unsigned long)ptr, size,
> diff --git a/arch/powerpc/platforms/512x/clock-commonclk.c b/arch/powerpc/platforms/512x/clock-commonclk.c
> index 0b03d812baae..0652c7e69225 100644
> --- a/arch/powerpc/platforms/512x/clock-commonclk.c
> +++ b/arch/powerpc/platforms/512x/clock-commonclk.c
> @@ -663,7 +663,7 @@ static void __init mpc512x_clk_setup_mclk(struct mclk_setup_data *entry, size_t
> * the PSC/MSCAN/SPDIF (serial drivers et al) need the MCLK
> * for their bitrate
> * - in the absence of "aliases" for clocks we need to create
> - * individial 'struct clk' items for whatever might get
> + * individual 'struct clk' items for whatever might get
> * referenced or looked up, even if several of those items are
> * identical from the logical POV (their rate value)
> * - for easier future maintenance and for better reflection of
> diff --git a/arch/powerpc/platforms/512x/mpc512x_shared.c b/arch/powerpc/platforms/512x/mpc512x_shared.c
> index e3411663edad..96d9cf49560d 100644
> --- a/arch/powerpc/platforms/512x/mpc512x_shared.c
> +++ b/arch/powerpc/platforms/512x/mpc512x_shared.c
> @@ -289,7 +289,7 @@ static void __init mpc512x_setup_diu(void)
>
> /*
> * We do not allocate and configure new area for bitmap buffer
> - * because it would requere copying bitmap data (splash image)
> + * because it would require copying bitmap data (splash image)
> * and so negatively affect boot time. Instead we reserve the
> * already configured frame buffer area so that it won't be
> * destroyed. The starting address of the area to reserve and
> diff --git a/arch/powerpc/platforms/52xx/mpc52xx_common.c b/arch/powerpc/platforms/52xx/mpc52xx_common.c
> index 565e3a83dc9e..60aa6015e284 100644
> --- a/arch/powerpc/platforms/52xx/mpc52xx_common.c
> +++ b/arch/powerpc/platforms/52xx/mpc52xx_common.c
> @@ -308,7 +308,7 @@ int mpc5200_psc_ac97_gpio_reset(int psc_number)
>
> spin_lock_irqsave(&gpio_lock, flags);
>
> - /* Reconfiure pin-muxing to gpio */
> + /* Reconfigure pin-muxing to gpio */
> mux = in_be32(&simple_gpio->port_config);
> out_be32(&simple_gpio->port_config, mux & (~gpio));
>
> diff --git a/arch/powerpc/platforms/52xx/mpc52xx_gpt.c b/arch/powerpc/platforms/52xx/mpc52xx_gpt.c
> index f862b48b4824..7252d992ca9f 100644
> --- a/arch/powerpc/platforms/52xx/mpc52xx_gpt.c
> +++ b/arch/powerpc/platforms/52xx/mpc52xx_gpt.c
> @@ -398,7 +398,7 @@ static int mpc52xx_gpt_do_start(struct mpc52xx_gpt_priv *gpt, u64 period,
> set |= MPC52xx_GPT_MODE_CONTINUOUS;
>
> /* Determine the number of clocks in the requested period. 64 bit
> - * arithmatic is done here to preserve the precision until the value
> + * arithmetic is done here to preserve the precision until the value
> * is scaled back down into the u32 range. Period is in 'ns', bus
> * frequency is in Hz. */
> clocks = period * (u64)gpt->ipb_freq;
> diff --git a/arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c b/arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c
> index b91ebebd9ff2..54dfc63809d3 100644
> --- a/arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c
> +++ b/arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c
> @@ -104,7 +104,7 @@ static void mpc52xx_lpbfifo_kick(struct mpc52xx_lpbfifo_request *req)
> *
> * Configure the watermarks so DMA will always complete correctly.
> * It may be worth experimenting with the ALARM value to see if
> - * there is a performance impacit. However, if it is wrong there
> + * there is a performance impact. However, if it is wrong there
> * is a risk of DMA not transferring the last chunk of data
> */
> if (write) {
> diff --git a/arch/powerpc/boot/cuboot-hotfoot.c b/arch/powerpc/boot/cuboot-hotfoot.c
> index 888a6b9bfead..0e5532f855d6 100644
> --- a/arch/powerpc/boot/cuboot-hotfoot.c
> +++ b/arch/powerpc/boot/cuboot-hotfoot.c
> @@ -70,7 +70,7 @@ static void hotfoot_fixups(void)
>
> printf("Fixing devtree for 4M Flash\n");
>
> - /* First fix up the base addresse */
> + /* First fix up the base address */
> getprop(devp, "reg", regs, sizeof(regs));
> regs[0] = 0;
> regs[1] = 0xffc00000;
> diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c
> index ae0fdef0ac11..2a271a6d6924 100644
> --- a/arch/powerpc/kernel/cputable.c
> +++ b/arch/powerpc/kernel/cputable.c
> @@ -2025,7 +2025,7 @@ static struct cpu_spec * __init setup_cpu_spec(unsigned long offset,
> * oprofile_cpu_type already has a value, then we are
> * possibly overriding a real PVR with a logical one,
> * and, in that case, keep the current value for
> - * oprofile_cpu_type. Futhermore, let's ensure that the
> + * oprofile_cpu_type. Furthermore, let's ensure that the
> * fix for the PMAO bug is enabled on compatibility mode.
> */
> if (old.oprofile_cpu_type != NULL) {
> diff --git a/arch/powerpc/kernel/dawr.c b/arch/powerpc/kernel/dawr.c
> index 64e423d2fe0f..30d4eca88d17 100644
> --- a/arch/powerpc/kernel/dawr.c
> +++ b/arch/powerpc/kernel/dawr.c
> @@ -27,7 +27,7 @@ int set_dawr(int nr, struct arch_hw_breakpoint *brk)
> dawrx |= (brk->type & (HW_BRK_TYPE_PRIV_ALL)) >> 3;
> /*
> * DAWR length is stored in field MDR bits 48:53. Matches range in
> - * doublewords (64 bits) baised by -1 eg. 0b000000=1DW and
> + * doublewords (64 bits) biased by -1 eg. 0b000000=1DW and
> * 0b111111=64DW.
> * brk->hw_len is in bytes.
> * This aligns up to double word size, shifts and does the bias.
> diff --git a/arch/powerpc/kernel/fadump.c b/arch/powerpc/kernel/fadump.c
> index 4c09c6688ac6..2451fabe4d45 100644
> --- a/arch/powerpc/kernel/fadump.c
> +++ b/arch/powerpc/kernel/fadump.c
> @@ -73,9 +73,9 @@ static struct cma *fadump_cma;
> * The total size of fadump reserved memory covers for boot memory size
> * + cpu data size + hpte size and metadata.
> * Initialize only the area equivalent to boot memory size for CMA use.
> - * The reamining portion of fadump reserved memory will be not given
> - * to CMA and pages for thoes will stay reserved. boot memory size is
> - * aligned per CMA requirement to satisy cma_init_reserved_mem() call.
> + * The remaining portion of fadump reserved memory will be not given
> + * to CMA and pages for those will stay reserved. boot memory size is
> + * aligned per CMA requirement to satisfy cma_init_reserved_mem() call.
> * But for some reason even if it fails we still have the memory reservation
> * with us and we can still continue doing fadump.
> */
> @@ -1661,8 +1661,8 @@ int __init setup_fadump(void)
> }
> /*
> * Use subsys_initcall_sync() here because there is dependency with
> - * crash_save_vmcoreinfo_init(), which mush run first to ensure vmcoreinfo initialization
> - * is done before regisering with f/w.
> + * crash_save_vmcoreinfo_init(), which must run first to ensure vmcoreinfo initialization
> + * is done before registering with f/w.
> */
> subsys_initcall_sync(setup_fadump);
> #else /* !CONFIG_PRESERVE_FA_DUMP */
> diff --git a/arch/powerpc/kernel/module_32.c b/arch/powerpc/kernel/module_32.c
> index a0432ef46967..e25b796682cc 100644
> --- a/arch/powerpc/kernel/module_32.c
> +++ b/arch/powerpc/kernel/module_32.c
> @@ -99,7 +99,7 @@ static unsigned long get_plt_size(const Elf32_Ehdr *hdr,
>
> /* Sort the relocation information based on a symbol and
> * addend key. This is a stable O(n*log n) complexity
> - * alogrithm but it will reduce the complexity of
> + * algorithm but it will reduce the complexity of
> * count_relocs() to linear complexity O(n)
> */
> sort((void *)hdr + sechdrs[i].sh_offset,
> diff --git a/arch/powerpc/kernel/module_64.c b/arch/powerpc/kernel/module_64.c
> index 794720530442..2cce576edbc5 100644
> --- a/arch/powerpc/kernel/module_64.c
> +++ b/arch/powerpc/kernel/module_64.c
> @@ -194,7 +194,7 @@ static unsigned long get_stubs_size(const Elf64_Ehdr *hdr,
>
> /* Sort the relocation information based on a symbol and
> * addend key. This is a stable O(n*log n) complexity
> - * alogrithm but it will reduce the complexity of
> + * algorithm but it will reduce the complexity of
> * count_relocs() to linear complexity O(n)
> */
> sort((void *)sechdrs[i].sh_addr,
> @@ -361,7 +361,7 @@ static inline int create_ftrace_stub(struct ppc64_stub_entry *entry,
> entry->jump[1] |= PPC_HA(reladdr);
> entry->jump[2] |= PPC_LO(reladdr);
>
> - /* Eventhough we don't use funcdata in the stub, it's needed elsewhere. */
> + /* Even though we don't use funcdata in the stub, it's needed elsewhere. */
> entry->funcdata = func_desc(addr);
> entry->magic = STUB_MAGIC;
>
> diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c
> index 8bc9cf62cd93..9a97a93bd11c 100644
> --- a/arch/powerpc/kernel/pci-common.c
> +++ b/arch/powerpc/kernel/pci-common.c
> @@ -1688,7 +1688,7 @@ EXPORT_SYMBOL_GPL(pcibios_scan_phb);
> static void fixup_hide_host_resource_fsl(struct pci_dev *dev)
> {
> int i, class = dev->class >> 8;
> - /* When configured as agent, programing interface = 1 */
> + /* When configured as agent, programming interface = 1 */
> int prog_if = dev->class & 0xf;
>
> if ((class == PCI_CLASS_PROCESSOR_POWERPC ||
> diff --git a/arch/powerpc/kernel/pci_of_scan.c b/arch/powerpc/kernel/pci_of_scan.c
> index c3024f104765..6f2b0cc1ddd6 100644
> --- a/arch/powerpc/kernel/pci_of_scan.c
> +++ b/arch/powerpc/kernel/pci_of_scan.c
> @@ -244,7 +244,7 @@ EXPORT_SYMBOL(of_create_pci_dev);
> * @dev: pci_dev structure for the bridge
> *
> * of_scan_bus() calls this routine for each PCI bridge that it finds, and
> - * this routine in turn call of_scan_bus() recusively to scan for more child
> + * this routine in turn call of_scan_bus() recursively to scan for more child
> * devices.
> */
> void of_scan_pci_bridge(struct pci_dev *dev)
> diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
> index 984813a4d5dc..eeb2dff95f9a 100644
> --- a/arch/powerpc/kernel/process.c
> +++ b/arch/powerpc/kernel/process.c
> @@ -307,7 +307,7 @@ static void __giveup_vsx(struct task_struct *tsk)
> unsigned long msr = tsk->thread.regs->msr;
>
> /*
> - * We should never be ssetting MSR_VSX without also setting
> + * We should never be setting MSR_VSX without also setting
> * MSR_FP and MSR_VEC
> */
> WARN_ON((msr & MSR_VSX) && !((msr & MSR_FP) && (msr & MSR_VEC)));
> @@ -645,7 +645,7 @@ static void do_break_handler(struct pt_regs *regs)
> return;
> }
>
> - /* Otherwise findout which DAWR caused exception and disable it. */
> + /* Otherwise find out which DAWR caused exception and disable it. */
> wp_get_instr_detail(regs, &instr, &type, &size, &ea);
>
> for (i = 0; i < nr_wp_slots(); i++) {
> diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c
> index 0ac5faacc909..ace861ec4c4c 100644
> --- a/arch/powerpc/kernel/prom_init.c
> +++ b/arch/powerpc/kernel/prom_init.c
> @@ -3416,7 +3416,7 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4,
> *
> * PowerMacs use a different mechanism to spin CPUs
> *
> - * (This must be done after instanciating RTAS)
> + * (This must be done after instantiating RTAS)
> */
> if (of_platform != PLATFORM_POWERMAC)
> prom_hold_cpus();
> diff --git a/arch/powerpc/kernel/ptrace/ptrace-view.c b/arch/powerpc/kernel/ptrace/ptrace-view.c
> index f15bc78caf71..076d867412c7 100644
> --- a/arch/powerpc/kernel/ptrace/ptrace-view.c
> +++ b/arch/powerpc/kernel/ptrace/ptrace-view.c
> @@ -174,7 +174,7 @@ int ptrace_get_reg(struct task_struct *task, int regno, unsigned long *data)
>
> /*
> * softe copies paca->irq_soft_mask variable state. Since irq_soft_mask is
> - * no more used as a flag, lets force usr to alway see the softe value as 1
> + * no more used as a flag, lets force usr to always see the softe value as 1
> * which means interrupts are not soft disabled.
> */
> if (IS_ENABLED(CONFIG_PPC64) && regno == PT_SOFTE) {
> diff --git a/arch/powerpc/kernel/rtas_flash.c b/arch/powerpc/kernel/rtas_flash.c
> index a99179d83538..bc817a5619d6 100644
> --- a/arch/powerpc/kernel/rtas_flash.c
> +++ b/arch/powerpc/kernel/rtas_flash.c
> @@ -120,7 +120,7 @@ static struct kmem_cache *flash_block_cache = NULL;
> /*
> * Local copy of the flash block list.
> *
> - * The rtas_firmware_flash_list varable will be
> + * The rtas_firmware_flash_list variable will be
> * set once the data is fully read.
> *
> * For convenience as we build the list we use virtual addrs,
> diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c
> index 518ae5aa9410..3acf2782acdf 100644
> --- a/arch/powerpc/kernel/setup-common.c
> +++ b/arch/powerpc/kernel/setup-common.c
> @@ -279,7 +279,7 @@ static int show_cpuinfo(struct seq_file *m, void *v)
> proc_freq / 1000000, proc_freq % 1000000);
>
> /* If we are a Freescale core do a simple check so
> - * we dont have to keep adding cases in the future */
> + * we don't have to keep adding cases in the future */
> if (PVR_VER(pvr) & 0x8000) {
> switch (PVR_VER(pvr)) {
> case 0x8000: /* 7441/7450/7451, Voyager */
> diff --git a/arch/powerpc/kernel/signal_64.c b/arch/powerpc/kernel/signal_64.c
> index 73d483b07ff3..858fc13b8c51 100644
> --- a/arch/powerpc/kernel/signal_64.c
> +++ b/arch/powerpc/kernel/signal_64.c
> @@ -123,7 +123,7 @@ static long notrace __unsafe_setup_sigcontext(struct sigcontext __user *sc,
> #endif
> struct pt_regs *regs = tsk->thread.regs;
> unsigned long msr = regs->msr;
> - /* Force usr to alway see softe as 1 (interrupts enabled) */
> + /* Force usr to always see softe as 1 (interrupts enabled) */
> unsigned long softe = 0x1;
>
> BUG_ON(tsk != current);
> diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c
> index 32156d98dfc8..32910af76a36 100644
> --- a/arch/powerpc/kernel/smp.c
> +++ b/arch/powerpc/kernel/smp.c
> @@ -1102,7 +1102,7 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
> DBG("smp_prepare_cpus\n");
>
> /*
> - * setup_cpu may need to be called on the boot cpu. We havent
> + * setup_cpu may need to be called on the boot cpu. We haven't
> * spun any cpus up but lets be paranoid.
> */
> BUG_ON(boot_cpuid != smp_processor_id());
> diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c
> index f80cce0e3899..4bf757ebe13d 100644
> --- a/arch/powerpc/kernel/time.c
> +++ b/arch/powerpc/kernel/time.c
> @@ -829,7 +829,7 @@ static void __read_persistent_clock(struct timespec64 *ts)
> static int first = 1;
>
> ts->tv_nsec = 0;
> - /* XXX this is a litle fragile but will work okay in the short term */
> + /* XXX this is a little fragile but will work okay in the short term */
> if (first) {
> first = 0;
> if (ppc_md.time_init)
> @@ -974,7 +974,7 @@ void secondary_cpu_time_init(void)
> */
> start_cpu_decrementer();
>
> - /* FIME: Should make unrelatred change to move snapshot_timebase
> + /* FIME: Should make unrelated change to move snapshot_timebase
> * call here ! */
> register_decrementer_clockevent(smp_processor_id());
> }
> diff --git a/arch/powerpc/kernel/watchdog.c b/arch/powerpc/kernel/watchdog.c
> index 62937a077de7..5b9eb7640a15 100644
> --- a/arch/powerpc/kernel/watchdog.c
> +++ b/arch/powerpc/kernel/watchdog.c
> @@ -56,7 +56,7 @@
> * solved by also having a SMP watchdog where all CPUs check all other
> * CPUs heartbeat.
> *
> - * The SMP checker can detect lockups on other CPUs. A gobal "pending"
> + * The SMP checker can detect lockups on other CPUs. A global "pending"
> * cpumask is kept, containing all CPUs which enable the watchdog. Each
> * CPU clears their pending bit in their heartbeat timer. When the bitmask
> * becomes empty, the last CPU to clear its pending bit updates a global
> diff --git a/arch/powerpc/kexec/core_64.c b/arch/powerpc/kexec/core_64.c
> index 6cc7793b8420..c29c639551fe 100644
> --- a/arch/powerpc/kexec/core_64.c
> +++ b/arch/powerpc/kexec/core_64.c
> @@ -406,7 +406,7 @@ static int __init export_htab_values(void)
> if (!node)
> return -ENODEV;
>
> - /* remove any stale propertys so ours can be found */
> + /* remove any stale properties so ours can be found */
> of_remove_property(node, of_find_property(node, htab_base_prop.name, NULL));
> of_remove_property(node, of_find_property(node, htab_size_prop.name, NULL));
>
> diff --git a/arch/powerpc/mm/book3s64/hash_pgtable.c b/arch/powerpc/mm/book3s64/hash_pgtable.c
> index 7ce8914992e3..2e0cad5817ba 100644
> --- a/arch/powerpc/mm/book3s64/hash_pgtable.c
> +++ b/arch/powerpc/mm/book3s64/hash_pgtable.c
> @@ -377,7 +377,7 @@ int hash__has_transparent_hugepage(void)
> if (mmu_psize_defs[MMU_PAGE_16M].shift != PMD_SHIFT)
> return 0;
> /*
> - * We need to make sure that we support 16MB hugepage in a segement
> + * We need to make sure that we support 16MB hugepage in a segment
> * with base page size 64K or 4K. We only enable THP with a PAGE_SIZE
> * of 64K.
> */
> diff --git a/arch/powerpc/mm/book3s64/hash_utils.c b/arch/powerpc/mm/book3s64/hash_utils.c
> index 985cabdd7f67..5b69b271707e 100644
> --- a/arch/powerpc/mm/book3s64/hash_utils.c
> +++ b/arch/powerpc/mm/book3s64/hash_utils.c
> @@ -1343,7 +1343,7 @@ static int subpage_protection(struct mm_struct *mm, unsigned long ea)
> spp >>= 30 - 2 * ((ea >> 12) & 0xf);
>
> /*
> - * 0 -> full premission
> + * 0 -> full permission
> * 1 -> Read only
> * 2 -> no access.
> * We return the flag that need to be cleared.
> @@ -1664,7 +1664,7 @@ DEFINE_INTERRUPT_HANDLER(do_hash_fault)
>
> err = hash_page_mm(mm, ea, access, TRAP(regs), flags);
> if (unlikely(err < 0)) {
> - // failed to instert a hash PTE due to an hypervisor error
> + // failed to insert a hash PTE due to an hypervisor error
> if (user_mode(regs)) {
> if (IS_ENABLED(CONFIG_PPC_SUBPAGE_PROT) && err == -2)
> _exception(SIGSEGV, regs, SEGV_ACCERR, ea);
> diff --git a/arch/powerpc/mm/book3s64/pgtable.c b/arch/powerpc/mm/book3s64/pgtable.c
> index 8b474ab32f67..7b9966402b25 100644
> --- a/arch/powerpc/mm/book3s64/pgtable.c
> +++ b/arch/powerpc/mm/book3s64/pgtable.c
> @@ -332,7 +332,7 @@ static pmd_t *__alloc_for_pmdcache(struct mm_struct *mm)
> spin_lock(&mm->page_table_lock);
> /*
> * If we find pgtable_page set, we return
> - * the allocated page with single fragement
> + * the allocated page with single fragment
> * count.
> */
> if (likely(!mm->context.pmd_frag)) {
> diff --git a/arch/powerpc/mm/book3s64/radix_pgtable.c b/arch/powerpc/mm/book3s64/radix_pgtable.c
> index def04631a74d..db2f3d193448 100644
> --- a/arch/powerpc/mm/book3s64/radix_pgtable.c
> +++ b/arch/powerpc/mm/book3s64/radix_pgtable.c
> @@ -359,7 +359,7 @@ static void __init radix_init_pgtable(void)
> if (!cpu_has_feature(CPU_FTR_HVMODE) &&
> cpu_has_feature(CPU_FTR_P9_RADIX_PREFETCH_BUG)) {
> /*
> - * Older versions of KVM on these machines perfer if the
> + * Older versions of KVM on these machines prefer if the
> * guest only uses the low 19 PID bits.
> */
> mmu_pid_bits = 19;
> diff --git a/arch/powerpc/mm/book3s64/radix_tlb.c b/arch/powerpc/mm/book3s64/radix_tlb.c
> index 7724af19ed7e..dda51fef2d2e 100644
> --- a/arch/powerpc/mm/book3s64/radix_tlb.c
> +++ b/arch/powerpc/mm/book3s64/radix_tlb.c
> @@ -397,7 +397,7 @@ static inline void _tlbie_pid(unsigned long pid, unsigned long ric)
>
> /*
> * Workaround the fact that the "ric" argument to __tlbie_pid
> - * must be a compile-time contraint to match the "i" constraint
> + * must be a compile-time constraint to match the "i" constraint
> * in the asm statement.
> */
> switch (ric) {
> diff --git a/arch/powerpc/mm/book3s64/slb.c b/arch/powerpc/mm/book3s64/slb.c
> index 81091b9587f6..6956f637a38c 100644
> --- a/arch/powerpc/mm/book3s64/slb.c
> +++ b/arch/powerpc/mm/book3s64/slb.c
> @@ -347,7 +347,7 @@ void slb_setup_new_exec(void)
> /*
> * We have no good place to clear the slb preload cache on exec,
> * flush_thread is about the earliest arch hook but that happens
> - * after we switch to the mm and have aleady preloaded the SLBEs.
> + * after we switch to the mm and have already preloaded the SLBEs.
> *
> * For the most part that's probably okay to use entries from the
> * previous exec, they will age out if unused. It may turn out to
> @@ -615,7 +615,7 @@ static void slb_cache_update(unsigned long esid_data)
> } else {
> /*
> * Our cache is full and the current cache content strictly
> - * doesn't indicate the active SLB conents. Bump the ptr
> + * doesn't indicate the active SLB contents. Bump the ptr
> * so that switch_slb() will ignore the cache.
> */
> local_paca->slb_cache_ptr = SLB_CACHE_ENTRIES + 1;
> diff --git a/arch/powerpc/mm/init_64.c b/arch/powerpc/mm/init_64.c
> index 83c0ee9fbf05..2e11952057f8 100644
> --- a/arch/powerpc/mm/init_64.c
> +++ b/arch/powerpc/mm/init_64.c
> @@ -111,7 +111,7 @@ static int __meminit vmemmap_populated(unsigned long vmemmap_addr, int vmemmap_m
> }
>
> /*
> - * vmemmap virtual address space management does not have a traditonal page
> + * vmemmap virtual address space management does not have a traditional page
> * table to track which virtual struct pages are backed by physical mapping.
> * The virtual to physical mappings are tracked in a simple linked list
> * format. 'vmemmap_list' maintains the entire vmemmap physical mapping at
> @@ -128,7 +128,7 @@ static struct vmemmap_backing *next;
>
> /*
> * The same pointer 'next' tracks individual chunks inside the allocated
> - * full page during the boot time and again tracks the freeed nodes during
> + * full page during the boot time and again tracks the freed nodes during
> * runtime. It is racy but it does not happen as they are separated by the
> * boot process. Will create problem if some how we have memory hotplug
> * operation during boot !!
> diff --git a/arch/powerpc/mm/nohash/book3e_hugetlbpage.c b/arch/powerpc/mm/nohash/book3e_hugetlbpage.c
> index 8b88be91b622..307ca919d393 100644
> --- a/arch/powerpc/mm/nohash/book3e_hugetlbpage.c
> +++ b/arch/powerpc/mm/nohash/book3e_hugetlbpage.c
> @@ -142,7 +142,7 @@ book3e_hugetlb_preload(struct vm_area_struct *vma, unsigned long ea, pte_t pte)
> tsize = shift - 10;
> /*
> * We can't be interrupted while we're setting up the MAS
> - * regusters or after we've confirmed that no tlb exists.
> + * registers or after we've confirmed that no tlb exists.
> */
> local_irq_save(flags);
>
> diff --git a/arch/powerpc/mm/nohash/kaslr_booke.c b/arch/powerpc/mm/nohash/kaslr_booke.c
> index 96c38f971603..636ec583d989 100644
> --- a/arch/powerpc/mm/nohash/kaslr_booke.c
> +++ b/arch/powerpc/mm/nohash/kaslr_booke.c
> @@ -315,7 +315,7 @@ static unsigned long __init kaslr_choose_location(void *dt_ptr, phys_addr_t size
> ram = map_mem_in_cams(ram, CONFIG_LOWMEM_CAM_NUM, true, true);
> linear_sz = min_t(unsigned long, ram, SZ_512M);
>
> - /* If the linear size is smaller than 64M, do not randmize */
> + /* If the linear size is smaller than 64M, do not randomize */
> if (linear_sz < SZ_64M)
> return 0;
>
> diff --git a/arch/powerpc/mm/pgtable-frag.c b/arch/powerpc/mm/pgtable-frag.c
> index 97ae4935da79..20652daa1d7e 100644
> --- a/arch/powerpc/mm/pgtable-frag.c
> +++ b/arch/powerpc/mm/pgtable-frag.c
> @@ -83,7 +83,7 @@ static pte_t *__alloc_for_ptecache(struct mm_struct *mm, int kernel)
> spin_lock(&mm->page_table_lock);
> /*
> * If we find pgtable_page set, we return
> - * the allocated page with single fragement
> + * the allocated page with single fragment
> * count.
> */
> if (likely(!pte_frag_get(&mm->context))) {
> diff --git a/arch/powerpc/perf/8xx-pmu.c b/arch/powerpc/perf/8xx-pmu.c
> index 4738c4dbf567..308a2e40d7be 100644
> --- a/arch/powerpc/perf/8xx-pmu.c
> +++ b/arch/powerpc/perf/8xx-pmu.c
> @@ -157,7 +157,7 @@ static void mpc8xx_pmu_del(struct perf_event *event, int flags)
>
> mpc8xx_pmu_read(event);
>
> - /* If it was the last user, stop counting to avoid useles overhead */
> + /* If it was the last user, stop counting to avoid useless overhead */
> switch (event_type(event)) {
> case PERF_8xx_ID_CPU_CYCLES:
> break;
> diff --git a/arch/powerpc/perf/core-book3s.c b/arch/powerpc/perf/core-book3s.c
> index b5b42cf0a703..140502a7fdf8 100644
> --- a/arch/powerpc/perf/core-book3s.c
> +++ b/arch/powerpc/perf/core-book3s.c
> @@ -1142,7 +1142,7 @@ static u64 check_and_compute_delta(u64 prev, u64 val)
> /*
> * POWER7 can roll back counter values, if the new value is smaller
> * than the previous value it will cause the delta and the counter to
> - * have bogus values unless we rolled a counter over. If a coutner is
> + * have bogus values unless we rolled a counter over. If a counter is
> * rolled back, it will be smaller, but within 256, which is the maximum
> * number of events to rollback at once. If we detect a rollback
> * return 0. This can lead to a small lack of precision in the
> @@ -2057,7 +2057,7 @@ static int power_pmu_event_init(struct perf_event *event)
> /*
> * PMU config registers have fields that are
> * reserved and some specific values for bit fields are reserved.
> - * For ex., MMCRA[61:62] is Randome Sampling Mode (SM)
> + * For ex., MMCRA[61:62] is Random Sampling Mode (SM)
> * and value of 0b11 to this field is reserved.
> * Check for invalid values in attr.config.
> */
> @@ -2447,7 +2447,7 @@ static void __perf_event_interrupt(struct pt_regs *regs)
> }
>
> /*
> - * During system wide profling or while specific CPU is monitored for an
> + * During system wide profiling or while specific CPU is monitored for an
> * event, some corner cases could cause PMC to overflow in idle path. This
> * will trigger a PMI after waking up from idle. Since counter values are _not_
> * saved/restored in idle path, can lead to below "Can't find PMC" message.
> diff --git a/arch/powerpc/perf/imc-pmu.c b/arch/powerpc/perf/imc-pmu.c
> index 526d4b767534..498f1a2f7658 100644
> --- a/arch/powerpc/perf/imc-pmu.c
> +++ b/arch/powerpc/perf/imc-pmu.c
> @@ -521,7 +521,7 @@ static int nest_imc_event_init(struct perf_event *event)
>
> /*
> * Nest HW counter memory resides in a per-chip reserve-memory (HOMER).
> - * Get the base memory addresss for this cpu.
> + * Get the base memory address for this cpu.
> */
> chip_id = cpu_to_chip_id(event->cpu);
>
> @@ -674,7 +674,7 @@ static int ppc_core_imc_cpu_offline(unsigned int cpu)
> /*
> * Check whether core_imc is registered. We could end up here
> * if the cpuhotplug callback registration fails. i.e, callback
> - * invokes the offline path for all sucessfully registered cpus.
> + * invokes the offline path for all successfully registered cpus.
> * At this stage, core_imc pmu will not be registered and we
> * should return here.
> *
> diff --git a/arch/powerpc/perf/isa207-common.c b/arch/powerpc/perf/isa207-common.c
> index a74d382ecbb7..839cc68212c1 100644
> --- a/arch/powerpc/perf/isa207-common.c
> +++ b/arch/powerpc/perf/isa207-common.c
> @@ -82,11 +82,11 @@ static unsigned long sdar_mod_val(u64 event)
> static void mmcra_sdar_mode(u64 event, unsigned long *mmcra)
> {
> /*
> - * MMCRA[SDAR_MODE] specifices how the SDAR should be updated in
> - * continous sampling mode.
> + * MMCRA[SDAR_MODE] specifies how the SDAR should be updated in
> + * continuous sampling mode.
> *
> * Incase of Power8:
> - * MMCRA[SDAR_MODE] will be programmed as "0b01" for continous sampling
> + * MMCRA[SDAR_MODE] will be programmed as "0b01" for continuous sampling
> * mode and will be un-changed when setting MMCRA[63] (Marked events).
> *
> * Incase of Power9/power10:
> diff --git a/arch/powerpc/platforms/86xx/gef_ppc9a.c b/arch/powerpc/platforms/86xx/gef_ppc9a.c
> index 44bbbc535e1d..884da08806ce 100644
> --- a/arch/powerpc/platforms/86xx/gef_ppc9a.c
> +++ b/arch/powerpc/platforms/86xx/gef_ppc9a.c
> @@ -180,7 +180,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_USB,
> *
> * This function is called to determine whether the BSP is compatible with the
> * supplied device-tree, which is assumed to be the correct one for the actual
> - * board. It is expected thati, in the future, a kernel may support multiple
> + * board. It is expected that, in the future, a kernel may support multiple
> * boards.
> */
> static int __init gef_ppc9a_probe(void)
> diff --git a/arch/powerpc/platforms/86xx/gef_sbc310.c b/arch/powerpc/platforms/86xx/gef_sbc310.c
> index 46d6d3d4957a..baaf1ab07016 100644
> --- a/arch/powerpc/platforms/86xx/gef_sbc310.c
> +++ b/arch/powerpc/platforms/86xx/gef_sbc310.c
> @@ -167,7 +167,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_USB,
> *
> * This function is called to determine whether the BSP is compatible with the
> * supplied device-tree, which is assumed to be the correct one for the actual
> - * board. It is expected thati, in the future, a kernel may support multiple
> + * board. It is expected that, in the future, a kernel may support multiple
> * boards.
> */
> static int __init gef_sbc310_probe(void)
> diff --git a/arch/powerpc/platforms/86xx/gef_sbc610.c b/arch/powerpc/platforms/86xx/gef_sbc610.c
> index acf2c6c3c1eb..120caf6af71d 100644
> --- a/arch/powerpc/platforms/86xx/gef_sbc610.c
> +++ b/arch/powerpc/platforms/86xx/gef_sbc610.c
> @@ -157,7 +157,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_USB,
> *
> * This function is called to determine whether the BSP is compatible with the
> * supplied device-tree, which is assumed to be the correct one for the actual
> - * board. It is expected thati, in the future, a kernel may support multiple
> + * board. It is expected that, in the future, a kernel may support multiple
> * boards.
> */
> static int __init gef_sbc610_probe(void)
> diff --git a/arch/powerpc/platforms/book3s/vas-api.c b/arch/powerpc/platforms/book3s/vas-api.c
> index f9a1615b74da..c0799fb26b6d 100644
> --- a/arch/powerpc/platforms/book3s/vas-api.c
> +++ b/arch/powerpc/platforms/book3s/vas-api.c
> @@ -30,7 +30,7 @@
> *
> * where "vas_copy" and "vas_paste" are defined in copy-paste.h.
> * copy/paste returns to the user space directly. So refer NX hardware
> - * documententation for exact copy/paste usage and completion / error
> + * documentation for exact copy/paste usage and completion / error
> * conditions.
> */
>
> diff --git a/arch/powerpc/platforms/powernv/idle.c b/arch/powerpc/platforms/powernv/idle.c
> index a6677a111aca..6f94b808dd39 100644
> --- a/arch/powerpc/platforms/powernv/idle.c
> +++ b/arch/powerpc/platforms/powernv/idle.c
> @@ -112,7 +112,7 @@ static int __init pnv_save_sprs_for_deep_states(void)
> if (rc != 0)
> return rc;
>
> - /* Only p8 needs to set extra HID regiters */
> + /* Only p8 needs to set extra HID registers */
> if (!cpu_has_feature(CPU_FTR_ARCH_300)) {
> uint64_t hid1_val = mfspr(SPRN_HID1);
> uint64_t hid4_val = mfspr(SPRN_HID4);
> @@ -1204,7 +1204,7 @@ static void __init pnv_arch300_idle_init(void)
> * The idle code does not deal with TB loss occurring
> * in a shallower state than SPR loss, so force it to
> * behave like SPRs are lost if TB is lost. POWER9 would
> - * never encouter this, but a POWER8 core would if it
> + * never encounter this, but a POWER8 core would if it
> * implemented the stop instruction. So this is for forward
> * compatibility.
> */
> diff --git a/arch/powerpc/platforms/powernv/opal-fadump.c b/arch/powerpc/platforms/powernv/opal-fadump.c
> index c8ad057c7221..a8da952610eb 100644
> --- a/arch/powerpc/platforms/powernv/opal-fadump.c
> +++ b/arch/powerpc/platforms/powernv/opal-fadump.c
> @@ -202,7 +202,7 @@ static u64 opal_fadump_init_mem_struct(struct fw_dump *fadump_conf)
> }
>
> /*
> - * Kernel metadata is passed to f/w and retrieved in capture kerenl.
> + * Kernel metadata is passed to f/w and retrieved in capture kernel.
> * So, use it to save fadump header address instead of calculating it.
> */
> opal_fdm->fadumphdr_addr = (opal_fdm->rgn[0].dest +
> diff --git a/arch/powerpc/platforms/powernv/opal-lpc.c b/arch/powerpc/platforms/powernv/opal-lpc.c
> index 5390c888db16..d129d6d45a50 100644
> --- a/arch/powerpc/platforms/powernv/opal-lpc.c
> +++ b/arch/powerpc/platforms/powernv/opal-lpc.c
> @@ -197,7 +197,7 @@ static ssize_t lpc_debug_read(struct file *filp, char __user *ubuf,
>
> /*
> * Select access size based on count and alignment and
> - * access type. IO and MEM only support byte acceses,
> + * access type. IO and MEM only support byte accesses,
> * FW supports all 3.
> */
> len = 1;
> diff --git a/arch/powerpc/platforms/powernv/opal-memory-errors.c b/arch/powerpc/platforms/powernv/opal-memory-errors.c
> index 1e8e17df9ce8..a1754a28265d 100644
> --- a/arch/powerpc/platforms/powernv/opal-memory-errors.c
> +++ b/arch/powerpc/platforms/powernv/opal-memory-errors.c
> @@ -82,7 +82,7 @@ static DECLARE_WORK(mem_error_work, mem_error_handler);
>
> /*
> * opal_memory_err_event - notifier handler that queues up the opal message
> - * to be preocessed later.
> + * to be processed later.
> */
> static int opal_memory_err_event(struct notifier_block *nb,
> unsigned long msg_type, void *msg)
> diff --git a/arch/powerpc/platforms/powernv/pci-sriov.c b/arch/powerpc/platforms/powernv/pci-sriov.c
> index 04155aaaadb1..fe3d111b881c 100644
> --- a/arch/powerpc/platforms/powernv/pci-sriov.c
> +++ b/arch/powerpc/platforms/powernv/pci-sriov.c
> @@ -699,7 +699,7 @@ static int pnv_pci_sriov_enable(struct pci_dev *pdev, u16 num_vfs)
> return -ENOSPC;
> }
>
> - /* allocate a contigious block of PEs for our VFs */
> + /* allocate a contiguous block of PEs for our VFs */
> base_pe = pnv_ioda_alloc_pe(phb, num_vfs);
> if (!base_pe) {
> pci_err(pdev, "Unable to allocate PEs for %d VFs\n", num_vfs);
> diff --git a/arch/powerpc/platforms/pseries/iommu.c b/arch/powerpc/platforms/pseries/iommu.c
> index 4d991cf840d9..7639e7355df2 100644
> --- a/arch/powerpc/platforms/pseries/iommu.c
> +++ b/arch/powerpc/platforms/pseries/iommu.c
> @@ -1430,7 +1430,7 @@ static bool enable_ddw(struct pci_dev *dev, struct device_node *pdn)
>
> pci->table_group->tables[1] = newtbl;
>
> - /* Keep default DMA window stuct if removed */
> + /* Keep default DMA window struct if removed */
> if (default_win_removed) {
> tbl->it_size = 0;
> vfree(tbl->it_map);
> diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c
> index 0f74b2284773..1a295350c403 100644
> --- a/arch/powerpc/platforms/pseries/setup.c
> +++ b/arch/powerpc/platforms/pseries/setup.c
> @@ -658,7 +658,7 @@ static resource_size_t pseries_get_iov_fw_value(struct pci_dev *dev, int resno,
> */
> num_res = of_read_number(&indexes[NUM_RES_PROPERTY], 1);
> if (resno >= num_res)
> - return 0; /* or an errror */
> + return 0; /* or an error */
>
> i = START_OF_ENTRIES + NEXT_ENTRY * resno;
> switch (value) {
> @@ -762,7 +762,7 @@ static void pseries_pci_fixup_iov_resources(struct pci_dev *pdev)
>
> if (!pdev->is_physfn)
> return;
> - /*Firmware must support open sriov otherwise dont configure*/
> + /*Firmware must support open sriov otherwise don't configure*/
> indexes = of_get_property(dn, "ibm,open-sriov-vf-bar-info", NULL);
> if (indexes)
> of_pci_parse_iov_addrs(pdev, indexes);
> diff --git a/arch/powerpc/platforms/pseries/vas-sysfs.c b/arch/powerpc/platforms/pseries/vas-sysfs.c
> index 909535ca513a..59aef6062847 100644
> --- a/arch/powerpc/platforms/pseries/vas-sysfs.c
> +++ b/arch/powerpc/platforms/pseries/vas-sysfs.c
> @@ -67,7 +67,7 @@ struct vas_sysfs_entry {
> * Create sysfs interface:
> * /sys/devices/vas/vas0/gzip/default_capabilities
> * This directory contains the following VAS GZIP capabilities
> - * for the defaule credit type.
> + * for the default credit type.
> * /sys/devices/vas/vas0/gzip/default_capabilities/nr_total_credits
> * Total number of default credits assigned to the LPAR which
> * can be changed with DLPAR operation.
> diff --git a/arch/powerpc/platforms/pseries/vas.c b/arch/powerpc/platforms/pseries/vas.c
> index 1f59d78c77a1..245e0a42981a 100644
> --- a/arch/powerpc/platforms/pseries/vas.c
> +++ b/arch/powerpc/platforms/pseries/vas.c
> @@ -807,7 +807,7 @@ int vas_reconfig_capabilties(u8 type)
> atomic_set(&caps->nr_total_credits, new_nr_creds);
> /*
> * The total number of available credits may be decreased or
> - * inceased with DLPAR operation. Means some windows have to be
> + * increased with DLPAR operation. Means some windows have to be
> * closed / reopened. Hold the vas_pseries_mutex so that the
> * the user space can not open new windows.
> */
> diff --git a/arch/powerpc/sysdev/fsl_lbc.c b/arch/powerpc/sysdev/fsl_lbc.c
> index 1985e067e952..18acfb4e82af 100644
> --- a/arch/powerpc/sysdev/fsl_lbc.c
> +++ b/arch/powerpc/sysdev/fsl_lbc.c
> @@ -37,7 +37,7 @@ EXPORT_SYMBOL(fsl_lbc_ctrl_dev);
> *
> * This function converts a base address of lbc into the right format for the
> * BR register. If the SOC has eLBC then it returns 32bit physical address
> - * else it convers a 34bit local bus physical address to correct format of
> + * else it converts a 34bit local bus physical address to correct format of
> * 32bit address for BR register (Example: MPC8641).
> */
> u32 fsl_lbc_addr(phys_addr_t addr_base)
> diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c
> index a97ce602394e..e5e29033929a 100644
> --- a/arch/powerpc/sysdev/fsl_pci.c
> +++ b/arch/powerpc/sysdev/fsl_pci.c
> @@ -218,7 +218,7 @@ static void setup_pci_atmu(struct pci_controller *hose)
> * windows have implemented the default target value as 0xf
> * for CCSR space.In all Freescale legacy devices the target
> * of 0xf is reserved for local memory space. 9132 Rev1.0
> - * now has local mempry space mapped to target 0x0 instead of
> + * now has local memory space mapped to target 0x0 instead of
> * 0xf. Hence adding a workaround to remove the target 0xf
> * defined for memory space from Inbound window attributes.
> */
> diff --git a/arch/powerpc/sysdev/ge/ge_pic.c b/arch/powerpc/sysdev/ge/ge_pic.c
> index 02553a8ce191..413b375c4d28 100644
> --- a/arch/powerpc/sysdev/ge/ge_pic.c
> +++ b/arch/powerpc/sysdev/ge/ge_pic.c
> @@ -150,7 +150,7 @@ static struct irq_chip gef_pic_chip = {
> };
>
>
> -/* When an interrupt is being configured, this call allows some flexibilty
> +/* When an interrupt is being configured, this call allows some flexibility
> * in deciding which irq_chip structure is used
> */
> static int gef_pic_host_map(struct irq_domain *h, unsigned int virq,
> diff --git a/arch/powerpc/sysdev/mpic_msgr.c b/arch/powerpc/sysdev/mpic_msgr.c
> index 36ec0bdd8b63..a25413826b63 100644
> --- a/arch/powerpc/sysdev/mpic_msgr.c
> +++ b/arch/powerpc/sysdev/mpic_msgr.c
> @@ -99,7 +99,7 @@ void mpic_msgr_disable(struct mpic_msgr *msgr)
> EXPORT_SYMBOL_GPL(mpic_msgr_disable);
>
> /* The following three functions are used to compute the order and number of
> - * the message register blocks. They are clearly very inefficent. However,
> + * the message register blocks. They are clearly very inefficient. However,
> * they are called *only* a few times during device initialization.
> */
> static unsigned int mpic_msgr_number_of_blocks(void)
> diff --git a/arch/powerpc/sysdev/mpic_msi.c b/arch/powerpc/sysdev/mpic_msi.c
> index f412d6ad0b66..9936c014ac7d 100644
> --- a/arch/powerpc/sysdev/mpic_msi.c
> +++ b/arch/powerpc/sysdev/mpic_msi.c
> @@ -37,7 +37,7 @@ static int __init mpic_msi_reserve_u3_hwirqs(struct mpic *mpic)
> /* Reserve source numbers we know are reserved in the HW.
> *
> * This is a bit of a mix of U3 and U4 reserves but that's going
> - * to work fine, we have plenty enugh numbers left so let's just
> + * to work fine, we have plenty enough numbers left so let's just
> * mark anything we don't like reserved.
> */
> for (i = 0; i < 8; i++)
> diff --git a/arch/powerpc/sysdev/mpic_timer.c b/arch/powerpc/sysdev/mpic_timer.c
> index 444e9ce42d0a..b2f0a73e8f93 100644
> --- a/arch/powerpc/sysdev/mpic_timer.c
> +++ b/arch/powerpc/sysdev/mpic_timer.c
> @@ -255,7 +255,7 @@ EXPORT_SYMBOL(mpic_start_timer);
>
> /**
> * mpic_stop_timer - stop hardware timer
> - * @handle: the timer to be stoped
> + * @handle: the timer to be stopped
> *
> * The timer periodically generates an interrupt. Unless user stops the timer.
> */
> diff --git a/arch/powerpc/sysdev/mpic_u3msi.c b/arch/powerpc/sysdev/mpic_u3msi.c
> index 3f4841dfefb5..73d129594078 100644
> --- a/arch/powerpc/sysdev/mpic_u3msi.c
> +++ b/arch/powerpc/sysdev/mpic_u3msi.c
> @@ -78,7 +78,7 @@ static u64 find_u4_magic_addr(struct pci_dev *pdev, unsigned int hwirq)
>
> /* U4 PCIe MSIs need to write to the special register in
> * the bridge that generates interrupts. There should be
> - * theorically a register at 0xf8005000 where you just write
> + * theoretically a register at 0xf8005000 where you just write
> * the MSI number and that triggers the right interrupt, but
> * unfortunately, this is busted in HW, the bridge endian swaps
> * the value and hits the wrong nibble in the register.
> diff --git a/arch/powerpc/sysdev/xive/native.c b/arch/powerpc/sysdev/xive/native.c
> index f940428ad13f..45f72fc715fc 100644
> --- a/arch/powerpc/sysdev/xive/native.c
> +++ b/arch/powerpc/sysdev/xive/native.c
> @@ -617,7 +617,7 @@ bool __init xive_native_init(void)
>
> xive_tima_os = r.start;
>
> - /* Grab size of provisionning pages */
> + /* Grab size of provisioning pages */
> xive_parse_provisioning(np);
>
> /* Switch the XIVE to exploitation mode */
> diff --git a/arch/powerpc/xmon/ppc-opc.c b/arch/powerpc/xmon/ppc-opc.c
> index dfb80810b16c..0774d711453e 100644
> --- a/arch/powerpc/xmon/ppc-opc.c
> +++ b/arch/powerpc/xmon/ppc-opc.c
> @@ -408,7 +408,7 @@ const struct powerpc_operand powerpc_operands[] =
> #define FXM4 FXM + 1
> { 0xff, 12, insert_fxm, extract_fxm,
> PPC_OPERAND_OPTIONAL | PPC_OPERAND_OPTIONAL_VALUE},
> - /* If the FXM4 operand is ommitted, use the sentinel value -1. */
> + /* If the FXM4 operand is omitted, use the sentinel value -1. */
> { -1, -1, NULL, NULL, 0},
>
> /* The IMM20 field in an LI instruction. */
> diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c
> index b423812e94e0..b80ab82b98e5 100644
> --- a/arch/powerpc/xmon/xmon.c
> +++ b/arch/powerpc/xmon/xmon.c
> @@ -2024,7 +2024,7 @@ static void dump_206_sprs(void)
> if (!cpu_has_feature(CPU_FTR_ARCH_206))
> return;
>
> - /* Actually some of these pre-date 2.06, but whatevs */
> + /* Actually some of these pre-date 2.06, but whatever */
>
> printf("srr0 = %.16lx srr1 = %.16lx dsisr = %.8lx\n",
> mfspr(SPRN_SRR0), mfspr(SPRN_SRR1), mfspr(SPRN_DSISR));
> diff --git a/arch/powerpc/platforms/powernv/ocxl.c b/arch/powerpc/platforms/powernv/ocxl.c
> index 28b009b46464..27c936075031 100644
> --- a/arch/powerpc/platforms/powernv/ocxl.c
> +++ b/arch/powerpc/platforms/powernv/ocxl.c
> @@ -289,7 +289,7 @@ int pnv_ocxl_get_pasid_count(struct pci_dev *dev, int *count)
> * be used by a function depends on how many functions exist
> * on the device. The NPU needs to be configured to know how
> * many bits are available to PASIDs and how many are to be
> - * used by the function BDF indentifier.
> + * used by the function BDF identifier.
> *
> * We only support one AFU-carrying function for now.
> */
>
