On Sun, Aug 22, 2021 at 04:51:11PM +0200, Christophe JAILLET wrote: > The wrappers in include/linux/pci-dma-compat.h should go away. > > The patch has been generated with the coccinelle script below. > > It has been hand modified to use 'dma_set_mask_and_coherent()' instead of > 'pci_set_dma_mask()/pci_set_consistent_dma_mask()' when applicable. > This is less verbose. > > The explicit 'ret = -EIO;' has been removed because > 'dma_set_mask_and_coherent()' returns 0 or -EIO, so its return code can be > used directly. > > It has been compile tested. > > > @@ > @@ > - PCI_DMA_BIDIRECTIONAL > + DMA_BIDIRECTIONAL > > @@ > @@ > - PCI_DMA_TODEVICE > + DMA_TO_DEVICE > > @@ > @@ > - PCI_DMA_FROMDEVICE > + DMA_FROM_DEVICE > > @@ > @@ > - PCI_DMA_NONE > + DMA_NONE > > @@ > expression e1, e2, e3; > @@ > - pci_alloc_consistent(e1, e2, e3) > + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) > > @@ > expression e1, e2, e3; > @@ > - pci_zalloc_consistent(e1, e2, e3) > + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) > > @@ > expression e1, e2, e3, e4; > @@ > - pci_free_consistent(e1, e2, e3, e4) > + dma_free_coherent(&e1->dev, e2, e3, e4) > > @@ > expression e1, e2, e3, e4; > @@ > - pci_map_single(e1, e2, e3, e4) > + dma_map_single(&e1->dev, e2, e3, e4) > > @@ > expression e1, e2, e3, e4; > @@ > - pci_unmap_single(e1, e2, e3, e4) > + dma_unmap_single(&e1->dev, e2, e3, e4) > > @@ > expression e1, e2, e3, e4, e5; > @@ > - pci_map_page(e1, e2, e3, e4, e5) > + dma_map_page(&e1->dev, e2, e3, e4, e5) > > @@ > expression e1, e2, e3, e4; > @@ > - pci_unmap_page(e1, e2, e3, e4) > + dma_unmap_page(&e1->dev, e2, e3, e4) > > @@ > expression e1, e2, e3, e4; > @@ > - pci_map_sg(e1, e2, e3, e4) > + dma_map_sg(&e1->dev, e2, e3, e4) > > @@ > expression e1, e2, e3, e4; > @@ > - pci_unmap_sg(e1, e2, e3, e4) > + dma_unmap_sg(&e1->dev, e2, e3, e4) > > @@ > expression e1, e2, e3, e4; > @@ > - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) > + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) > > @@ > expression e1, e2, e3, e4; > @@ > - pci_dma_sync_single_for_device(e1, e2, e3, e4) > + dma_sync_single_for_device(&e1->dev, e2, e3, e4) > > @@ > expression e1, e2, e3, e4; > @@ > - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) > + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) > > @@ > expression e1, e2, e3, e4; > @@ > - pci_dma_sync_sg_for_device(e1, e2, e3, e4) > + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) > > @@ > expression e1, e2; > @@ > - pci_dma_mapping_error(e1, e2) > + dma_mapping_error(&e1->dev, e2) > > @@ > expression e1, e2; > @@ > - pci_set_dma_mask(e1, e2) > + dma_set_mask(&e1->dev, e2) > > @@ > expression e1, e2; > @@ > - pci_set_consistent_dma_mask(e1, e2) > + dma_set_coherent_mask(&e1->dev, e2) > > Signed-off-by: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx> > --- > If needed, see post from Christoph Hellwig on the kernel-janitors ML: > https://marc.info/?l=kernel-janitors&m=158745678307186&w=4 > --- > drivers/fpga/dfl-pci.c | 14 ++++---------- > 1 file changed, 4 insertions(+), 10 deletions(-) > > diff --git a/drivers/fpga/dfl-pci.c b/drivers/fpga/dfl-pci.c > index 4d68719e608f..96a11084bef4 100644 > --- a/drivers/fpga/dfl-pci.c > +++ b/drivers/fpga/dfl-pci.c > @@ -354,16 +354,10 @@ int cci_pci_probe(struct pci_dev *pcidev, const struct pci_device_id *pcidevid) > > pci_set_master(pcidev); > > - if (!pci_set_dma_mask(pcidev, DMA_BIT_MASK(64))) { > - ret = pci_set_consistent_dma_mask(pcidev, DMA_BIT_MASK(64)); > - if (ret) > - goto disable_error_report_exit; > - } else if (!pci_set_dma_mask(pcidev, DMA_BIT_MASK(32))) { > - ret = pci_set_consistent_dma_mask(pcidev, DMA_BIT_MASK(32)); > - if (ret) > - goto disable_error_report_exit; > - } else { > - ret = -EIO; > + ret = dma_set_mask_and_coherent(&pcidev->dev, DMA_BIT_MASK(64)); > + if (ret) > + ret = dma_set_mask_and_coherent(&pcidev->dev, DMA_BIT_MASK(32)); > + if (ret) { > dev_err(&pcidev->dev, "No suitable DMA support available.\n"); > goto disable_error_report_exit; > } Reviewed-by: Xu Yilun <yilun.xu@xxxxxxxxx> Thanks, Yilun > -- > 2.30.2
