Commit 9d3239147d6d ("ARM: pxa: remove Compulab pxa2xx boards") removes
the config MACH_ARMCORE in ./arch/arm/mach-pxa/Kconfig.
Hence, ./scripts/checkkconfigsymbols.py warns on non-existing configs:
MACH_ARMCORE
Referencing files: drivers/pcmcia/Kconfig, drivers/pcmcia/Makefile
Clean up the dead remains of pcmcia drivers for Compulab pxa2xx boards.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@xxxxxxxxx>
---
drivers/pcmcia/Kconfig | 2 +-
drivers/pcmcia/Makefile | 2 -
drivers/pcmcia/pxa2xx_cm_x255.c | 124 --------------------------------
drivers/pcmcia/pxa2xx_cm_x270.c | 103 --------------------------
drivers/pcmcia/pxa2xx_cm_x2xx.c | 44 ------------
5 files changed, 1 insertion(+), 274 deletions(-)
delete mode 100644 drivers/pcmcia/pxa2xx_cm_x255.c
delete mode 100644 drivers/pcmcia/pxa2xx_cm_x270.c
delete mode 100644 drivers/pcmcia/pxa2xx_cm_x2xx.c
diff --git a/drivers/pcmcia/Kconfig b/drivers/pcmcia/Kconfig
index d13b8d1a780a..ab53eab635f6 100644
--- a/drivers/pcmcia/Kconfig
+++ b/drivers/pcmcia/Kconfig
@@ -209,7 +209,7 @@ config PCMCIA_PXA2XX
tristate "PXA2xx support"
depends on ARM && ARCH_PXA && PCMCIA
depends on (ARCH_LUBBOCK || MACH_MAINSTONE || PXA_SHARPSL \
- || MACH_ARMCORE || ARCH_PXA_PALM || TRIZEPS_PCMCIA \
+ || ARCH_PXA_PALM || TRIZEPS_PCMCIA \
|| ARCOM_PCMCIA || ARCH_PXA_ESERIES || MACH_STARGATE2 \
|| MACH_VPAC270 || MACH_BALLOON3 || MACH_COLIBRI \
|| MACH_COLIBRI320 || MACH_H4700)
diff --git a/drivers/pcmcia/Makefile b/drivers/pcmcia/Makefile
index d82c07c4806b..2d5657cfc49c 100644
--- a/drivers/pcmcia/Makefile
+++ b/drivers/pcmcia/Makefile
@@ -48,10 +48,8 @@ sa1100_cs-$(CONFIG_SA1100_H3100) += sa1100_h3600.o
sa1100_cs-$(CONFIG_SA1100_H3600) += sa1100_h3600.o
sa1100_cs-$(CONFIG_SA1100_SIMPAD) += sa1100_simpad.o
-pxa2xx_cm_x2xx_cs-y += pxa2xx_cm_x2xx.o pxa2xx_cm_x255.o pxa2xx_cm_x270.o
pxa2xx-obj-$(CONFIG_MACH_MAINSTONE) += pxa2xx_mainstone.o
pxa2xx-obj-$(CONFIG_PXA_SHARPSL) += pxa2xx_sharpsl.o
-pxa2xx-obj-$(CONFIG_MACH_ARMCORE) += pxa2xx_cm_x2xx_cs.o
pxa2xx-obj-$(CONFIG_ARCOM_PCMCIA) += pxa2xx_viper.o
pxa2xx-obj-$(CONFIG_TRIZEPS_PCMCIA) += pxa2xx_trizeps4.o
pxa2xx-obj-$(CONFIG_MACH_PALMTX) += pxa2xx_palmtx.o
diff --git a/drivers/pcmcia/pxa2xx_cm_x255.c b/drivers/pcmcia/pxa2xx_cm_x255.c
deleted file mode 100644
index c0b6b846fbaa..000000000000
--- a/drivers/pcmcia/pxa2xx_cm_x255.c
+++ /dev/null
@@ -1,124 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/drivers/pcmcia/pxa/pxa_cm_x255.c
- *
- * Compulab Ltd., 2003, 2007, 2008
- * Mike Rapoport <mike@xxxxxxxxxxxxxx>
- */
-
-#include <linux/platform_device.h>
-#include <linux/irq.h>
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/export.h>
-
-#include "soc_common.h"
-
-#define GPIO_PCMCIA_SKTSEL (54)
-#define GPIO_PCMCIA_S0_CD_VALID (16)
-#define GPIO_PCMCIA_S1_CD_VALID (17)
-#define GPIO_PCMCIA_S0_RDYINT (6)
-#define GPIO_PCMCIA_S1_RDYINT (8)
-#define GPIO_PCMCIA_RESET (9)
-
-static int cmx255_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
-{
- int ret = gpio_request(GPIO_PCMCIA_RESET, "PCCard reset");
- if (ret)
- return ret;
- gpio_direction_output(GPIO_PCMCIA_RESET, 0);
-
- if (skt->nr == 0) {
- skt->stat[SOC_STAT_CD].gpio = GPIO_PCMCIA_S0_CD_VALID;
- skt->stat[SOC_STAT_CD].name = "PCMCIA0 CD";
- skt->stat[SOC_STAT_RDY].gpio = GPIO_PCMCIA_S0_RDYINT;
- skt->stat[SOC_STAT_RDY].name = "PCMCIA0 RDY";
- } else {
- skt->stat[SOC_STAT_CD].gpio = GPIO_PCMCIA_S1_CD_VALID;
- skt->stat[SOC_STAT_CD].name = "PCMCIA1 CD";
- skt->stat[SOC_STAT_RDY].gpio = GPIO_PCMCIA_S1_RDYINT;
- skt->stat[SOC_STAT_RDY].name = "PCMCIA1 RDY";
- }
-
- return 0;
-}
-
-static void cmx255_pcmcia_shutdown(struct soc_pcmcia_socket *skt)
-{
- gpio_free(GPIO_PCMCIA_RESET);
-}
-
-
-static void cmx255_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
- struct pcmcia_state *state)
-{
- state->vs_3v = 0;
- state->vs_Xv = 0;
-}
-
-
-static int cmx255_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
- const socket_state_t *state)
-{
- switch (skt->nr) {
- case 0:
- if (state->flags & SS_RESET) {
- gpio_set_value(GPIO_PCMCIA_SKTSEL, 0);
- udelay(1);
- gpio_set_value(GPIO_PCMCIA_RESET, 1);
- udelay(10);
- gpio_set_value(GPIO_PCMCIA_RESET, 0);
- }
- break;
- case 1:
- if (state->flags & SS_RESET) {
- gpio_set_value(GPIO_PCMCIA_SKTSEL, 1);
- udelay(1);
- gpio_set_value(GPIO_PCMCIA_RESET, 1);
- udelay(10);
- gpio_set_value(GPIO_PCMCIA_RESET, 0);
- }
- break;
- }
-
- return 0;
-}
-
-static struct pcmcia_low_level cmx255_pcmcia_ops __initdata = {
- .owner = THIS_MODULE,
- .hw_init = cmx255_pcmcia_hw_init,
- .hw_shutdown = cmx255_pcmcia_shutdown,
- .socket_state = cmx255_pcmcia_socket_state,
- .configure_socket = cmx255_pcmcia_configure_socket,
- .nr = 1,
-};
-
-static struct platform_device *cmx255_pcmcia_device;
-
-int __init cmx255_pcmcia_init(void)
-{
- int ret;
-
- cmx255_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1);
-
- if (!cmx255_pcmcia_device)
- return -ENOMEM;
-
- ret = platform_device_add_data(cmx255_pcmcia_device, &cmx255_pcmcia_ops,
- sizeof(cmx255_pcmcia_ops));
-
- if (ret == 0) {
- printk(KERN_INFO "Registering cm-x255 PCMCIA interface.\n");
- ret = platform_device_add(cmx255_pcmcia_device);
- }
-
- if (ret)
- platform_device_put(cmx255_pcmcia_device);
-
- return ret;
-}
-
-void __exit cmx255_pcmcia_exit(void)
-{
- platform_device_unregister(cmx255_pcmcia_device);
-}
diff --git a/drivers/pcmcia/pxa2xx_cm_x270.c b/drivers/pcmcia/pxa2xx_cm_x270.c
deleted file mode 100644
index 36e35da5f887..000000000000
--- a/drivers/pcmcia/pxa2xx_cm_x270.c
+++ /dev/null
@@ -1,103 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/drivers/pcmcia/pxa/pxa_cm_x270.c
- *
- * Compulab Ltd., 2003, 2007, 2008
- * Mike Rapoport <mike@xxxxxxxxxxxxxx>
- */
-
-#include <linux/platform_device.h>
-#include <linux/irq.h>
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/export.h>
-
-#include "soc_common.h"
-
-#define GPIO_PCMCIA_S0_CD_VALID (84)
-#define GPIO_PCMCIA_S0_RDYINT (82)
-#define GPIO_PCMCIA_RESET (53)
-
-static int cmx270_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
-{
- int ret = gpio_request(GPIO_PCMCIA_RESET, "PCCard reset");
- if (ret)
- return ret;
- gpio_direction_output(GPIO_PCMCIA_RESET, 0);
-
- skt->stat[SOC_STAT_CD].gpio = GPIO_PCMCIA_S0_CD_VALID;
- skt->stat[SOC_STAT_CD].name = "PCMCIA0 CD";
- skt->stat[SOC_STAT_RDY].gpio = GPIO_PCMCIA_S0_RDYINT;
- skt->stat[SOC_STAT_RDY].name = "PCMCIA0 RDY";
-
- return ret;
-}
-
-static void cmx270_pcmcia_shutdown(struct soc_pcmcia_socket *skt)
-{
- gpio_free(GPIO_PCMCIA_RESET);
-}
-
-
-static void cmx270_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
- struct pcmcia_state *state)
-{
- state->vs_3v = 0;
- state->vs_Xv = 0;
-}
-
-
-static int cmx270_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
- const socket_state_t *state)
-{
- switch (skt->nr) {
- case 0:
- if (state->flags & SS_RESET) {
- gpio_set_value(GPIO_PCMCIA_RESET, 1);
- udelay(10);
- gpio_set_value(GPIO_PCMCIA_RESET, 0);
- }
- break;
- }
-
- return 0;
-}
-
-static struct pcmcia_low_level cmx270_pcmcia_ops __initdata = {
- .owner = THIS_MODULE,
- .hw_init = cmx270_pcmcia_hw_init,
- .hw_shutdown = cmx270_pcmcia_shutdown,
- .socket_state = cmx270_pcmcia_socket_state,
- .configure_socket = cmx270_pcmcia_configure_socket,
- .nr = 1,
-};
-
-static struct platform_device *cmx270_pcmcia_device;
-
-int __init cmx270_pcmcia_init(void)
-{
- int ret;
-
- cmx270_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1);
-
- if (!cmx270_pcmcia_device)
- return -ENOMEM;
-
- ret = platform_device_add_data(cmx270_pcmcia_device, &cmx270_pcmcia_ops,
- sizeof(cmx270_pcmcia_ops));
-
- if (ret == 0) {
- printk(KERN_INFO "Registering cm-x270 PCMCIA interface.\n");
- ret = platform_device_add(cmx270_pcmcia_device);
- }
-
- if (ret)
- platform_device_put(cmx270_pcmcia_device);
-
- return ret;
-}
-
-void __exit cmx270_pcmcia_exit(void)
-{
- platform_device_unregister(cmx270_pcmcia_device);
-}
diff --git a/drivers/pcmcia/pxa2xx_cm_x2xx.c b/drivers/pcmcia/pxa2xx_cm_x2xx.c
deleted file mode 100644
index 14eae238131d..000000000000
--- a/drivers/pcmcia/pxa2xx_cm_x2xx.c
+++ /dev/null
@@ -1,44 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/drivers/pcmcia/pxa/pxa_cm_x2xx.c
- *
- * Compulab Ltd., 2003, 2007, 2008
- * Mike Rapoport <mike@xxxxxxxxxxxxxx>
- */
-
-#include <linux/module.h>
-
-#include <asm/mach-types.h>
-#include <mach/hardware.h>
-
-int cmx255_pcmcia_init(void);
-int cmx270_pcmcia_init(void);
-void cmx255_pcmcia_exit(void);
-void cmx270_pcmcia_exit(void);
-
-static int __init cmx2xx_pcmcia_init(void)
-{
- int ret = -ENODEV;
-
- if (machine_is_armcore() && cpu_is_pxa25x())
- ret = cmx255_pcmcia_init();
- else if (machine_is_armcore() && cpu_is_pxa27x())
- ret = cmx270_pcmcia_init();
-
- return ret;
-}
-
-static void __exit cmx2xx_pcmcia_exit(void)
-{
- if (machine_is_armcore() && cpu_is_pxa25x())
- cmx255_pcmcia_exit();
- else if (machine_is_armcore() && cpu_is_pxa27x())
- cmx270_pcmcia_exit();
-}
-
-module_init(cmx2xx_pcmcia_init);
-module_exit(cmx2xx_pcmcia_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mike Rapoport <mike@xxxxxxxxxxxxxx>");
-MODULE_DESCRIPTION("CM-x2xx PCMCIA driver");
--
2.26.2
