From: Colin Ian King <colin.king@xxxxxxxxxxxxx>
Don't populate arrays the stack but instead make them static const. Replace
array channel_info with channel_all since it contains the same data as
channel_all. Makes object code smaller by 961 bytes.
Before:
text data bss dec hex filename
128147 44250 1024 173421 2a56d ../realtek/rtlwifi/rtl8192de/phy.o
After
text data bss dec hex filename
127122 44314 1024 172460 2a1ac ../realtek/rtlwifi/rtl8192de/phy.o
(gcc version 10.2.0)
Signed-off-by: Colin Ian King <colin.king@xxxxxxxxxxxxx>
---
V2: Remove channel_info and replace with channel_all since it is the
same as channel_info. Thanks to Joe Perches for spotting this.
---
.../wireless/realtek/rtlwifi/rtl8192de/phy.c | 48 ++++++++-----------
1 file changed, 20 insertions(+), 28 deletions(-)
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192de/phy.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192de/phy.c
index 50c2d8f6f9c0..8ae69d914312 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8192de/phy.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192de/phy.c
@@ -160,6 +160,15 @@ static u32 targetchnl_2g[TARGET_CHNL_NUM_2G] = {
25711, 25658, 25606, 25554, 25502, 25451, 25328
};
+static const u8 channel_all[59] = {
+ 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14,
+ 36, 38, 40, 42, 44, 46, 48, 50, 52, 54, 56, 58,
+ 60, 62, 64, 100, 102, 104, 106, 108, 110, 112,
+ 114, 116, 118, 120, 122, 124, 126, 128, 130,
+ 132, 134, 136, 138, 140, 149, 151, 153, 155,
+ 157, 159, 161, 163, 165
+};
+
static u32 _rtl92d_phy_calculate_bit_shift(u32 bitmask)
{
u32 i = ffs(bitmask);
@@ -1354,14 +1363,6 @@ static void _rtl92d_phy_switch_rf_setting(struct ieee80211_hw *hw, u8 channel)
u8 rtl92d_get_rightchnlplace_for_iqk(u8 chnl)
{
- u8 channel_all[59] = {
- 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14,
- 36, 38, 40, 42, 44, 46, 48, 50, 52, 54, 56, 58,
- 60, 62, 64, 100, 102, 104, 106, 108, 110, 112,
- 114, 116, 118, 120, 122, 124, 126, 128, 130,
- 132, 134, 136, 138, 140, 149, 151, 153, 155,
- 157, 159, 161, 163, 165
- };
u8 place = chnl;
if (chnl > 14) {
@@ -3220,37 +3221,28 @@ void rtl92d_phy_config_macphymode_info(struct ieee80211_hw *hw)
u8 rtl92d_get_chnlgroup_fromarray(u8 chnl)
{
u8 group;
- u8 channel_info[59] = {
- 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14,
- 36, 38, 40, 42, 44, 46, 48, 50, 52, 54, 56,
- 58, 60, 62, 64, 100, 102, 104, 106, 108,
- 110, 112, 114, 116, 118, 120, 122, 124,
- 126, 128, 130, 132, 134, 136, 138, 140,
- 149, 151, 153, 155, 157, 159, 161, 163,
- 165
- };
- if (channel_info[chnl] <= 3)
+ if (channel_all[chnl] <= 3)
group = 0;
- else if (channel_info[chnl] <= 9)
+ else if (channel_all[chnl] <= 9)
group = 1;
- else if (channel_info[chnl] <= 14)
+ else if (channel_all[chnl] <= 14)
group = 2;
- else if (channel_info[chnl] <= 44)
+ else if (channel_all[chnl] <= 44)
group = 3;
- else if (channel_info[chnl] <= 54)
+ else if (channel_all[chnl] <= 54)
group = 4;
- else if (channel_info[chnl] <= 64)
+ else if (channel_all[chnl] <= 64)
group = 5;
- else if (channel_info[chnl] <= 112)
+ else if (channel_all[chnl] <= 112)
group = 6;
- else if (channel_info[chnl] <= 126)
+ else if (channel_all[chnl] <= 126)
group = 7;
- else if (channel_info[chnl] <= 140)
+ else if (channel_all[chnl] <= 140)
group = 8;
- else if (channel_info[chnl] <= 153)
+ else if (channel_all[chnl] <= 153)
group = 9;
- else if (channel_info[chnl] <= 159)
+ else if (channel_all[chnl] <= 159)
group = 10;
else
group = 11;
--
2.31.1
