Remove sdio defines which are not used by this driver. Signed-off-by: Martin Kaiser <martin@xxxxxxxxx> --- .../staging/rtl8188eu/include/rtl8188e_spec.h | 136 ------------------ 1 file changed, 136 deletions(-) diff --git a/drivers/staging/rtl8188eu/include/rtl8188e_spec.h b/drivers/staging/rtl8188eu/include/rtl8188e_spec.h index 55cce1f6bd77..94baea8bc068 100644 --- a/drivers/staging/rtl8188eu/include/rtl8188e_spec.h +++ b/drivers/staging/rtl8188eu/include/rtl8188e_spec.h @@ -1089,142 +1089,6 @@ So the following defines for 92C is not entire!!!!!! #define SCR_TXBCUSEDK BIT(6) /* Force Tx Bcast pkt Use Default Key */ #define SCR_RXBCUSEDK BIT(7) /* Force Rx Bcast pkt Use Default Key */ -/* RTL8188E SDIO Configuration */ - -/* I/O bus domain address mapping */ -#define SDIO_LOCAL_BASE 0x10250000 -#define WLAN_IOREG_BASE 0x10260000 -#define FIRMWARE_FIFO_BASE 0x10270000 -#define TX_HIQ_BASE 0x10310000 -#define TX_MIQ_BASE 0x10320000 -#define TX_LOQ_BASE 0x10330000 -#define RX_RX0FF_BASE 0x10340000 - -/* SDIO host local register space mapping. */ -#define SDIO_LOCAL_MSK 0x0FFF -#define WLAN_IOREG_MSK 0x7FFF -#define WLAN_FIFO_MSK 0x1FFF /* Aggregation Length[12:0] */ -#define WLAN_RX0FF_MSK 0x0003 - -/* Without ref to the SDIO Device ID */ -#define SDIO_WITHOUT_REF_DEVICE_ID 0 -#define SDIO_LOCAL_DEVICE_ID 0 /* 0b[16], 000b[15:13] */ -#define WLAN_TX_HIQ_DEVICE_ID 4 /* 0b[16], 100b[15:13] */ -#define WLAN_TX_MIQ_DEVICE_ID 5 /* 0b[16], 101b[15:13] */ -#define WLAN_TX_LOQ_DEVICE_ID 6 /* 0b[16], 110b[15:13] */ -#define WLAN_RX0FF_DEVICE_ID 7 /* 0b[16], 111b[15:13] */ -#define WLAN_IOREG_DEVICE_ID 8 /* 1b[16] */ - -/* SDIO Tx Free Page Index */ -#define HI_QUEUE_IDX 0 -#define MID_QUEUE_IDX 1 -#define LOW_QUEUE_IDX 2 -#define PUBLIC_QUEUE_IDX 3 - -#define SDIO_MAX_TX_QUEUE 3 /* HIQ, MIQ and LOQ */ -#define SDIO_MAX_RX_QUEUE 1 - -/* SDIO Tx Control */ -#define SDIO_REG_TX_CTRL 0x0000 -/* SDIO Host Interrupt Mask */ -#define SDIO_REG_HIMR 0x0014 -/* SDIO Host Interrupt Service Routine */ -#define SDIO_REG_HISR 0x0018 -/* HCI Current Power Mode */ -#define SDIO_REG_HCPWM 0x0019 -/* RXDMA Request Length */ -#define SDIO_REG_RX0_REQ_LEN 0x001C -/* Free Tx Buffer Page */ -#define SDIO_REG_FREE_TXPG 0x0020 -/* HCI Current Power Mode 1 */ -#define SDIO_REG_HCPWM1 0x0024 -/* HCI Current Power Mode 2 */ -#define SDIO_REG_HCPWM2 0x0026 -/* HTSF Informaion */ -#define SDIO_REG_HTSFR_INFO 0x0030 -/* HCI Request Power Mode 1 */ -#define SDIO_REG_HRPWM1 0x0080 -/* HCI Request Power Mode 2 */ -#define SDIO_REG_HRPWM2 0x0082 -/* HCI Power Save Clock */ -#define SDIO_REG_HPS_CLKR 0x0084 -/* SDIO HCI Suspend Control */ -#define SDIO_REG_HSUS_CTRL 0x0086 -/* SDIO Host Extension Interrupt Mask Always */ -#define SDIO_REG_HIMR_ON 0x0090 -/* SDIO Host Extension Interrupt Status Always */ -#define SDIO_REG_HISR_ON 0x0091 - -#define SDIO_HIMR_DISABLED 0 - -/* RTL8188E SDIO Host Interrupt Mask Register */ -#define SDIO_HIMR_RX_REQUEST_MSK BIT(0) -#define SDIO_HIMR_AVAL_MSK BIT(1) -#define SDIO_HIMR_TXERR_MSK BIT(2) -#define SDIO_HIMR_RXERR_MSK BIT(3) -#define SDIO_HIMR_TXFOVW_MSK BIT(4) -#define SDIO_HIMR_RXFOVW_MSK BIT(5) -#define SDIO_HIMR_TXBCNOK_MSK BIT(6) -#define SDIO_HIMR_TXBCNERR_MSK BIT(7) -#define SDIO_HIMR_BCNERLY_INT_MSK BIT(16) -#define SDIO_HIMR_C2HCMD_MSK BIT(17) -#define SDIO_HIMR_CPWM1_MSK BIT(18) -#define SDIO_HIMR_CPWM2_MSK BIT(19) -#define SDIO_HIMR_HSISR_IND_MSK BIT(20) -#define SDIO_HIMR_GTINT3_IND_MSK BIT(21) -#define SDIO_HIMR_GTINT4_IND_MSK BIT(22) -#define SDIO_HIMR_PSTIMEOUT_MSK BIT(23) -#define SDIO_HIMR_OCPINT_MSK BIT(24) -#define SDIO_HIMR_ATIMEND_MSK BIT(25) -#define SDIO_HIMR_ATIMEND_E_MSK BIT(26) -#define SDIO_HIMR_CTWEND_MSK BIT(27) - -/* RTL8188E SDIO Specific */ -#define SDIO_HIMR_MCU_ERR_MSK BIT(28) -#define SDIO_HIMR_TSF_BIT32_TOGGLE_MSK BIT(29) - -/* SDIO Host Interrupt Service Routine */ -#define SDIO_HISR_RX_REQUEST BIT(0) -#define SDIO_HISR_AVAL BIT(1) -#define SDIO_HISR_TXERR BIT(2) -#define SDIO_HISR_RXERR BIT(3) -#define SDIO_HISR_TXFOVW BIT(4) -#define SDIO_HISR_RXFOVW BIT(5) -#define SDIO_HISR_TXBCNOK BIT(6) -#define SDIO_HISR_TXBCNERR BIT(7) -#define SDIO_HISR_BCNERLY_INT BIT(16) -#define SDIO_HISR_C2HCMD BIT(17) -#define SDIO_HISR_CPWM1 BIT(18) -#define SDIO_HISR_CPWM2 BIT(19) -#define SDIO_HISR_HSISR_IND BIT(20) -#define SDIO_HISR_GTINT3_IND BIT(21) -#define SDIO_HISR_GTINT4_IND BIT(22) -#define SDIO_HISR_PSTIME BIT(23) -#define SDIO_HISR_OCPINT BIT(24) -#define SDIO_HISR_ATIMEND BIT(25) -#define SDIO_HISR_ATIMEND_E BIT(26) -#define SDIO_HISR_CTWEND BIT(27) - -/* RTL8188E SDIO Specific */ -#define SDIO_HISR_MCU_ERR BIT(28) -#define SDIO_HISR_TSF_BIT32_TOGGLE BIT(29) - -#define MASK_SDIO_HISR_CLEAR \ - (SDIO_HISR_TXERR | SDIO_HISR_RXERR | SDIO_HISR_TXFOVW |\ - SDIO_HISR_RXFOVW | SDIO_HISR_TXBCNOK | SDIO_HISR_TXBCNERR |\ - SDIO_HISR_C2HCMD | SDIO_HISR_CPWM1 | SDIO_HISR_CPWM2 |\ - SDIO_HISR_HSISR_IND | SDIO_HISR_GTINT3_IND | SDIO_HISR_GTINT4_IND |\ - SDIO_HISR_PSTIMEOUT | SDIO_HISR_OCPINT) - -/* SDIO HCI Suspend Control Register */ -#define HCI_RESUME_PWR_RDY BIT(1) -#define HCI_SUS_CTRL BIT(0) - -/* SDIO Tx FIFO related */ -/* The number of Tx FIFO free page */ -#define SDIO_TX_FREE_PG_QUEUE 4 -#define SDIO_TX_FIFO_PAGE_SZ 128 - /* 0xFE00h ~ 0xFE55h USB Configuration */ /* 2 USB Information (0xFE17) */ -- 2.20.1
