The command 'find drivers/watchdog | xargs ./scripts/kernel-doc -none'
reports a number of kernel-doc warnings in the watchdog subsystem.
Address the kernel-doc warnings that were purely syntactic issues with
kernel-doc comments.
The remaining kernel-doc warnings are of type "Excess function parameter"
and "Function parameter or member not described". These warnings would
need to be addressed in a second pass with a bit more insight into the
APIs and purpose of the functions in the watchdog subsystem.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@xxxxxxxxx>
---
Guenter, Wim, please pick this minor clean-up patch.
drivers/watchdog/booke_wdt.c | 2 +-
drivers/watchdog/eurotechwdt.c | 2 +-
drivers/watchdog/mei_wdt.c | 8 ++++----
drivers/watchdog/octeon-wdt-main.c | 12 +++++++-----
drivers/watchdog/pc87413_wdt.c | 2 +-
drivers/watchdog/wdt.c | 4 ++--
drivers/watchdog/wdt_pci.c | 2 +-
7 files changed, 17 insertions(+), 15 deletions(-)
diff --git a/drivers/watchdog/booke_wdt.c b/drivers/watchdog/booke_wdt.c
index 7817fb976f9c..5e4dc1a0f2c6 100644
--- a/drivers/watchdog/booke_wdt.c
+++ b/drivers/watchdog/booke_wdt.c
@@ -148,7 +148,7 @@ static void __booke_wdt_enable(void *data)
}
/**
- * booke_wdt_disable - disable the watchdog on the given CPU
+ * __booke_wdt_disable - disable the watchdog on the given CPU
*
* This function is called on each CPU. It disables the watchdog on that CPU.
*
diff --git a/drivers/watchdog/eurotechwdt.c b/drivers/watchdog/eurotechwdt.c
index 2418ebb707bd..ce682942662c 100644
--- a/drivers/watchdog/eurotechwdt.c
+++ b/drivers/watchdog/eurotechwdt.c
@@ -392,7 +392,7 @@ static struct notifier_block eurwdt_notifier = {
};
/**
- * cleanup_module:
+ * eurwdt_exit:
*
* Unload the watchdog. You cannot do this with any file handles open.
* If your watchdog is set to continue ticking on close and you unload
diff --git a/drivers/watchdog/mei_wdt.c b/drivers/watchdog/mei_wdt.c
index e023d7d90d66..c7a7235e6224 100644
--- a/drivers/watchdog/mei_wdt.c
+++ b/drivers/watchdog/mei_wdt.c
@@ -105,7 +105,7 @@ struct mei_wdt {
#endif /* CONFIG_DEBUG_FS */
};
-/*
+/**
* struct mei_mc_hdr - Management Control Command Header
*
* @command: Management Control (0x2)
@@ -121,7 +121,7 @@ struct mei_mc_hdr {
};
/**
- * struct mei_wdt_start_request watchdog start/ping
+ * struct mei_wdt_start_request - watchdog start/ping
*
* @hdr: Management Control Command Header
* @timeout: timeout value
@@ -134,7 +134,7 @@ struct mei_wdt_start_request {
} __packed;
/**
- * struct mei_wdt_start_response watchdog start/ping response
+ * struct mei_wdt_start_response - watchdog start/ping response
*
* @hdr: Management Control Command Header
* @status: operation status
@@ -474,7 +474,7 @@ static void mei_wdt_rx(struct mei_cl_device *cldev)
complete(&wdt->response);
}
-/*
+/**
* mei_wdt_notif - callback for event notification
*
* @cldev: bus device
diff --git a/drivers/watchdog/octeon-wdt-main.c b/drivers/watchdog/octeon-wdt-main.c
index fde9e739b436..298c070884c4 100644
--- a/drivers/watchdog/octeon-wdt-main.c
+++ b/drivers/watchdog/octeon-wdt-main.c
@@ -119,7 +119,7 @@ static int cpu2core(int cpu)
}
/**
- * Poke the watchdog when an interrupt is received
+ * octeon_wdt_poke_irq - Poke the watchdog when an interrupt is received
*
* @cpl:
* @dev_id:
@@ -153,7 +153,7 @@ static irqreturn_t octeon_wdt_poke_irq(int cpl, void *dev_id)
extern int prom_putchar(char c);
/**
- * Write a string to the uart
+ * octeon_wdt_write_string - Write a string to the uart
*
* @str: String to write
*/
@@ -165,7 +165,7 @@ static void octeon_wdt_write_string(const char *str)
}
/**
- * Write a hex number out of the uart
+ * octeon_wdt_write_hex() - Write a hex number out of the uart
*
* @value: Number to display
* @digits: Number of digits to print (1 to 16)
@@ -192,6 +192,8 @@ static const char reg_name[][3] = {
};
/**
+ * octeon_wdt_nmi_stage3:
+ *
* NMI stage 3 handler. NMIs are handled in the following manner:
* 1) The first NMI handler enables CVMSEG and transfers from
* the bootbus region into normal memory. It is careful to not
@@ -513,7 +515,7 @@ static struct watchdog_device octeon_wdt = {
static enum cpuhp_state octeon_wdt_online;
/**
- * Module/ driver initialization.
+ * octeon_wdt_init - Module/ driver initialization.
*
* Returns Zero on success
*/
@@ -585,7 +587,7 @@ static int __init octeon_wdt_init(void)
}
/**
- * Module / driver shutdown
+ * octeon_wdt_cleanup - Module / driver shutdown
*/
static void __exit octeon_wdt_cleanup(void)
{
diff --git a/drivers/watchdog/pc87413_wdt.c b/drivers/watchdog/pc87413_wdt.c
index 2d4504302c9e..9f9a340427fc 100644
--- a/drivers/watchdog/pc87413_wdt.c
+++ b/drivers/watchdog/pc87413_wdt.c
@@ -445,7 +445,7 @@ static long pc87413_ioctl(struct file *file, unsigned int cmd,
/* -- Notifier funtions -----------------------------------------*/
/**
- * notify_sys:
+ * pc87413_notify_sys:
* @this: our notifier block
* @code: the event being reported
* @unused: unused
diff --git a/drivers/watchdog/wdt.c b/drivers/watchdog/wdt.c
index a9e40b5c633e..183876156243 100644
--- a/drivers/watchdog/wdt.c
+++ b/drivers/watchdog/wdt.c
@@ -494,7 +494,7 @@ static int wdt_temp_release(struct inode *inode, struct file *file)
}
/**
- * notify_sys:
+ * wdt_notify_sys:
* @this: our notifier block
* @code: the event being reported
* @unused: unused
@@ -558,7 +558,7 @@ static struct notifier_block wdt_notifier = {
};
/**
- * cleanup_module:
+ * wdt_exit:
*
* Unload the watchdog. You cannot do this with any file handles open.
* If your watchdog is set to continue ticking on close and you unload
diff --git a/drivers/watchdog/wdt_pci.c b/drivers/watchdog/wdt_pci.c
index c3254ba5ace6..d5e56b601351 100644
--- a/drivers/watchdog/wdt_pci.c
+++ b/drivers/watchdog/wdt_pci.c
@@ -537,7 +537,7 @@ static int wdtpci_temp_release(struct inode *inode, struct file *file)
}
/**
- * notify_sys:
+ * wdtpci_notify_sys:
* @this: our notifier block
* @code: the event being reported
* @unused: unused
--
2.17.1
