Re: [PATCH net-next] net: phy: icplus: Call phy_restore_page() when phy_select_page() fails

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Feb 17, 2021 at 05:28:38PM +0300, Dan Carpenter wrote:
> On Wed, Feb 17, 2021 at 09:17:59AM +0300, Dan Carpenter wrote:
> > Smatch warns that there is a locking issue in this function:
> > 
> > drivers/net/phy/icplus.c:273 ip101a_g_config_intr_pin()
> > warn: inconsistent returns '&phydev->mdio.bus->mdio_lock'.
> >   Locked on  : 242
> >   Unlocked on: 273
> > 
> > It turns out that the comments in phy_select_page() say we have to call
> > phy_restore_page() even if the call to phy_select_page() fails.
> > 
> > Fixes: f9bc51e6cce2 ("net: phy: icplus: fix paged register access")
> 
> Don't apply this patch.  I have created a new Smatch warning for the
> phy_select_page() behavior and it catches a couple similar bugs in the
> same file.  I will send a v2 that fixes those as well.

Yes, there are three instances of this in the file, all three need
fixing. Thanks.

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!



[Index of Archives]     [Kernel Development]     [Kernel Announce]     [Kernel Newbies]     [Linux Networking Development]     [Share Photos]     [IDE]     [Security]     [Git]     [Netfilter]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Device Mapper]

  Powered by Linux