Re: [PATCH] Input: elo - fix an error code in elo_connect()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Feb 16, 2021 at 08:37:31PM -0800, Dmitry Torokhov wrote:
> Hi Dan,
> 
> On Thu, Jan 28, 2021 at 12:35:51PM +0300, Dan Carpenter wrote:
> > If elo_setup_10() fails then this should return an error code instead
> > of success.
> 
> Thank you for the patch.
> 
> > 
> > Fixes: fae3006e4b42 ("Input: elo - add support for non-pressure-sensitive touchscreens")
> > Signed-off-by: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
> > ---
> >  drivers/input/touchscreen/elo.c | 4 +++-
> >  1 file changed, 3 insertions(+), 1 deletion(-)
> > 
> > diff --git a/drivers/input/touchscreen/elo.c b/drivers/input/touchscreen/elo.c
> > index e0bacd34866a..4b2fb73da5e2 100644
> > --- a/drivers/input/touchscreen/elo.c
> > +++ b/drivers/input/touchscreen/elo.c
> > @@ -341,8 +341,10 @@ static int elo_connect(struct serio *serio, struct serio_driver *drv)
> >  	switch (elo->id) {
> >  
> >  	case 0: /* 10-byte protocol */
> > -		if (elo_setup_10(elo))
> > +		if (elo_setup_10(elo)) {
> > +			err = -EINVAL;
> 
> Ideally we'd propagate error from elo_setup_10() and underlying code,
> but we are not ready for it, as most serio code simply uses -1 for
> errors. However I think that -EIO would suit better here. Please let me
> know if you disagree, otherwise I'll fix it up on my side.
> 

-EIO is fine.  Thanks!

regards,
dan carpenter




[Index of Archives]     [Kernel Development]     [Kernel Announce]     [Kernel Newbies]     [Linux Networking Development]     [Share Photos]     [IDE]     [Security]     [Git]     [Netfilter]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Device Mapper]

  Powered by Linux