Re: [PATCH][next] scsi: pm8001: remove space in a debug message

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, 2020-11-24 at 09:38 +0000, Colin King wrote:
> From: Colin Ian King <colin.king@xxxxxxxxxxxxx>
> 
> There are two words that need separating with a space in a 
> pm8001_dbg message. Fix it.
> 
> Signed-off-by: Colin Ian King <colin.king@xxxxxxxxxxxxx>
> ---
>  drivers/scsi/pm8001/pm8001_hwi.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/scsi/pm8001/pm8001_hwi.c
> b/drivers/scsi/pm8001/pm8001_hwi.c
> index 08d6cc9b50db..c8d4d87c5473 100644
> --- a/drivers/scsi/pm8001/pm8001_hwi.c
> +++ b/drivers/scsi/pm8001/pm8001_hwi.c
> @@ -1031,7 +1031,7 @@ pm8001_chip_soft_rst(struct pm8001_hba_info
> *pm8001_ha)
>  	regVal = pm8001_cr32(pm8001_ha, 2,
> GSM_WRITE_DATA_PARITY_CHECK);
>  	pm8001_cw32(pm8001_ha, 2, GSM_WRITE_DATA_PARITY_CHECK,
> regVal3);
>  	pm8001_dbg(pm8001_ha, INIT,
> -		   "GSM 0x700048 - Write Data Parity Check Enableis set
> to = 0x%x\n",
> +		   "GSM 0x700048 - Write Data Parity Check Enable is
> set to = 0x%x\n",
>  		   pm8001_cr32(pm8001_ha, 2,
> GSM_WRITE_DATA_PARITY_CHECK));
>  
>  	/* step 13: bring the IOP and AAP1 out of reset */

Reviewed-by: Ewan D. Milne <emilne@xxxxxxxxxx>





[Index of Archives]     [Kernel Development]     [Kernel Announce]     [Kernel Newbies]     [Linux Networking Development]     [Share Photos]     [IDE]     [Security]     [Git]     [Netfilter]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Device Mapper]

  Powered by Linux