The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below and has been hand modified to replace GFP_ with a correct flag. It has been compile tested. When memory is allocated in 'rtl8180_init_rx_ring()' and 'rtl8180_init_tx_ring()' GFP_KERNEL can be used because both functions are called from 'rtl8180_start()', which is a .start function (see struct ieee80211_ops) .start function can sleep, as explicitly stated in include/net/mac80211.h. @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Signed-off-by: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx> --- If needed, see post from Christoph Hellwig on the kernel-janitors ML: https://marc.info/?l=kernel-janitors&m=158745678307186&w=4 This patch is a ressend because there was a typo in Kalle Valo <kvalo@xxxxxxxxxxxxxx> mail address. --- .../wireless/realtek/rtl818x/rtl8180/dev.c | 70 ++++++++++--------- 1 file changed, 37 insertions(+), 33 deletions(-) diff --git a/drivers/net/wireless/realtek/rtl818x/rtl8180/dev.c b/drivers/net/wireless/realtek/rtl818x/rtl8180/dev.c index ba3286f732cc..2477e18c7cae 100644 --- a/drivers/net/wireless/realtek/rtl818x/rtl8180/dev.c +++ b/drivers/net/wireless/realtek/rtl818x/rtl8180/dev.c @@ -260,20 +260,20 @@ static void rtl8180_handle_rx(struct ieee80211_hw *dev) if (unlikely(!new_skb)) goto done; - mapping = pci_map_single(priv->pdev, - skb_tail_pointer(new_skb), - MAX_RX_SIZE, PCI_DMA_FROMDEVICE); + mapping = dma_map_single(&priv->pdev->dev, + skb_tail_pointer(new_skb), + MAX_RX_SIZE, DMA_FROM_DEVICE); - if (pci_dma_mapping_error(priv->pdev, mapping)) { + if (dma_mapping_error(&priv->pdev->dev, mapping)) { kfree_skb(new_skb); dev_err(&priv->pdev->dev, "RX DMA map error\n"); goto done; } - pci_unmap_single(priv->pdev, + dma_unmap_single(&priv->pdev->dev, *((dma_addr_t *)skb->cb), - MAX_RX_SIZE, PCI_DMA_FROMDEVICE); + MAX_RX_SIZE, DMA_FROM_DEVICE); skb_put(skb, flags & 0xFFF); rx_status.antenna = (flags2 >> 15) & 1; @@ -355,8 +355,8 @@ static void rtl8180_handle_tx(struct ieee80211_hw *dev, unsigned int prio) ring->idx = (ring->idx + 1) % ring->entries; skb = __skb_dequeue(&ring->queue); - pci_unmap_single(priv->pdev, le32_to_cpu(entry->tx_buf), - skb->len, PCI_DMA_TODEVICE); + dma_unmap_single(&priv->pdev->dev, le32_to_cpu(entry->tx_buf), + skb->len, DMA_TO_DEVICE); info = IEEE80211_SKB_CB(skb); ieee80211_tx_info_clear_status(info); @@ -473,10 +473,10 @@ static void rtl8180_tx(struct ieee80211_hw *dev, prio = skb_get_queue_mapping(skb); ring = &priv->tx_ring[prio]; - mapping = pci_map_single(priv->pdev, skb->data, - skb->len, PCI_DMA_TODEVICE); + mapping = dma_map_single(&priv->pdev->dev, skb->data, skb->len, + DMA_TO_DEVICE); - if (pci_dma_mapping_error(priv->pdev, mapping)) { + if (dma_mapping_error(&priv->pdev->dev, mapping)) { kfree_skb(skb); dev_err(&priv->pdev->dev, "TX DMA mapping error\n"); return; @@ -1004,8 +1004,9 @@ static int rtl8180_init_rx_ring(struct ieee80211_hw *dev) else priv->rx_ring_sz = sizeof(struct rtl8180_rx_desc); - priv->rx_ring = pci_zalloc_consistent(priv->pdev, priv->rx_ring_sz * 32, - &priv->rx_ring_dma); + priv->rx_ring = dma_alloc_coherent(&priv->pdev->dev, + priv->rx_ring_sz * 32, + &priv->rx_ring_dma, GFP_KERNEL); if (!priv->rx_ring || (unsigned long)priv->rx_ring & 0xFF) { wiphy_err(dev->wiphy, "Cannot allocate RX ring\n"); return -ENOMEM; @@ -1018,20 +1019,23 @@ static int rtl8180_init_rx_ring(struct ieee80211_hw *dev) dma_addr_t *mapping; entry = priv->rx_ring + priv->rx_ring_sz*i; if (!skb) { - pci_free_consistent(priv->pdev, priv->rx_ring_sz * 32, - priv->rx_ring, priv->rx_ring_dma); + dma_free_coherent(&priv->pdev->dev, + priv->rx_ring_sz * 32, + priv->rx_ring, priv->rx_ring_dma); wiphy_err(dev->wiphy, "Cannot allocate RX skb\n"); return -ENOMEM; } priv->rx_buf[i] = skb; mapping = (dma_addr_t *)skb->cb; - *mapping = pci_map_single(priv->pdev, skb_tail_pointer(skb), - MAX_RX_SIZE, PCI_DMA_FROMDEVICE); + *mapping = dma_map_single(&priv->pdev->dev, + skb_tail_pointer(skb), MAX_RX_SIZE, + DMA_FROM_DEVICE); - if (pci_dma_mapping_error(priv->pdev, *mapping)) { + if (dma_mapping_error(&priv->pdev->dev, *mapping)) { kfree_skb(skb); - pci_free_consistent(priv->pdev, priv->rx_ring_sz * 32, - priv->rx_ring, priv->rx_ring_dma); + dma_free_coherent(&priv->pdev->dev, + priv->rx_ring_sz * 32, + priv->rx_ring, priv->rx_ring_dma); wiphy_err(dev->wiphy, "Cannot map DMA for RX skb\n"); return -ENOMEM; } @@ -1054,14 +1058,13 @@ static void rtl8180_free_rx_ring(struct ieee80211_hw *dev) if (!skb) continue; - pci_unmap_single(priv->pdev, - *((dma_addr_t *)skb->cb), - MAX_RX_SIZE, PCI_DMA_FROMDEVICE); + dma_unmap_single(&priv->pdev->dev, *((dma_addr_t *)skb->cb), + MAX_RX_SIZE, DMA_FROM_DEVICE); kfree_skb(skb); } - pci_free_consistent(priv->pdev, priv->rx_ring_sz * 32, - priv->rx_ring, priv->rx_ring_dma); + dma_free_coherent(&priv->pdev->dev, priv->rx_ring_sz * 32, + priv->rx_ring, priv->rx_ring_dma); priv->rx_ring = NULL; } @@ -1073,8 +1076,8 @@ static int rtl8180_init_tx_ring(struct ieee80211_hw *dev, dma_addr_t dma; int i; - ring = pci_zalloc_consistent(priv->pdev, sizeof(*ring) * entries, - &dma); + ring = dma_alloc_coherent(&priv->pdev->dev, sizeof(*ring) * entries, + &dma, GFP_KERNEL); if (!ring || (unsigned long)ring & 0xFF) { wiphy_err(dev->wiphy, "Cannot allocate TX ring (prio = %d)\n", prio); @@ -1103,14 +1106,15 @@ static void rtl8180_free_tx_ring(struct ieee80211_hw *dev, unsigned int prio) struct rtl8180_tx_desc *entry = &ring->desc[ring->idx]; struct sk_buff *skb = __skb_dequeue(&ring->queue); - pci_unmap_single(priv->pdev, le32_to_cpu(entry->tx_buf), - skb->len, PCI_DMA_TODEVICE); + dma_unmap_single(&priv->pdev->dev, le32_to_cpu(entry->tx_buf), + skb->len, DMA_TO_DEVICE); kfree_skb(skb); ring->idx = (ring->idx + 1) % ring->entries; } - pci_free_consistent(priv->pdev, sizeof(*ring->desc)*ring->entries, - ring->desc, ring->dma); + dma_free_coherent(&priv->pdev->dev, + sizeof(*ring->desc) * ring->entries, ring->desc, + ring->dma); ring->desc = NULL; } @@ -1754,8 +1758,8 @@ static int rtl8180_probe(struct pci_dev *pdev, goto err_free_reg; } - if ((err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) || - (err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)))) { + if ((err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32))) || + (err = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32)))) { printk(KERN_ERR "%s (rtl8180): No suitable DMA available\n", pci_name(pdev)); goto err_free_reg; -- 2.25.1
