[PATCH -next] regulator: stm32-pwr: Make some symbols static

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Fixes the following sparse warnings:

drivers/regulator/stm32-pwr.c:35:5: warning:
 symbol 'ready_mask_table' was not declared. Should it be static?
drivers/regulator/stm32-pwr.c:47:5: warning:
 symbol 'stm32_pwr_reg_is_ready' was not declared. Should it be static?
drivers/regulator/stm32-pwr.c:57:5: warning:
 symbol 'stm32_pwr_reg_is_enabled' was not declared. Should it be static?

Fixes: 6cdae8173f67 ("regulator: Add support for stm32 power regulators")
Signed-off-by: Wei Yongjun <weiyongjun1@xxxxxxxxxx>
---
 drivers/regulator/stm32-pwr.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/regulator/stm32-pwr.c b/drivers/regulator/stm32-pwr.c
index e434b26d4c8b..222d593d76a2 100644
--- a/drivers/regulator/stm32-pwr.c
+++ b/drivers/regulator/stm32-pwr.c
@@ -32,7 +32,7 @@ enum {
 	STM32PWR_REG_NUM_REGS
 };
 
-u32 ready_mask_table[STM32PWR_REG_NUM_REGS] = {
+static u32 ready_mask_table[STM32PWR_REG_NUM_REGS] = {
 	[PWR_REG11] = REG_1_1_RDY,
 	[PWR_REG18] = REG_1_8_RDY,
 	[PWR_USB33] = USB_3_3_RDY,
@@ -44,7 +44,7 @@ struct stm32_pwr_reg {
 	u32 ready_mask;
 };
 
-int stm32_pwr_reg_is_ready(struct regulator_dev *rdev)
+static int stm32_pwr_reg_is_ready(struct regulator_dev *rdev)
 {
 	struct stm32_pwr_reg *priv = rdev_get_drvdata(rdev);
 	u32 val;
@@ -54,7 +54,7 @@ int stm32_pwr_reg_is_ready(struct regulator_dev *rdev)
 	return (val & priv->ready_mask);
 }
 
-int stm32_pwr_reg_is_enabled(struct regulator_dev *rdev)
+static int stm32_pwr_reg_is_enabled(struct regulator_dev *rdev)
 {
 	struct stm32_pwr_reg *priv = rdev_get_drvdata(rdev);
 	u32 val;






[Index of Archives]     [Kernel Development]     [Kernel Announce]     [Kernel Newbies]     [Linux Networking Development]     [Share Photos]     [IDE]     [Security]     [Git]     [Netfilter]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Device Mapper]

  Powered by Linux