On Sun, Mar 17, 2019 at 7:15 PM Colin King <colin.king@xxxxxxxxxxxxx> wrote:
>
> From: Colin Ian King <colin.king@xxxxxxxxxxxxx>
>
> There are several lines of code where the indentation is
> at an incorrect level; fix these.
>
> Signed-off-by: Colin Ian King <colin.king@xxxxxxxxxxxxx>
Acked-by: Jack Wang <jinpu.wang@xxxxxxxxxxxxxxx>
Thanks, Colin
Jack
> ---
> drivers/scsi/pm8001/pm8001_hwi.c | 8 +++---
> drivers/scsi/pm8001/pm8001_sas.c | 4 +--
> drivers/scsi/pm8001/pm80xx_hwi.c | 44 ++++++++++++++++----------------
> 3 files changed, 28 insertions(+), 28 deletions(-)
>
> diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c
> index d0bb357034d8..e0fee3d91d23 100644
> --- a/drivers/scsi/pm8001/pm8001_hwi.c
> +++ b/drivers/scsi/pm8001/pm8001_hwi.c
> @@ -960,9 +960,9 @@ pm8001_chip_soft_rst(struct pm8001_hba_info *pm8001_ha)
> return -1;
> }
> regVal = pm8001_cr32(pm8001_ha, 2, GPIO_GPIO_0_0UTPUT_CTL_OFFSET);
> - PM8001_INIT_DBG(pm8001_ha,
> - pm8001_printk("GPIO Output Control Register:"
> - " = 0x%x\n", regVal));
> + PM8001_INIT_DBG(pm8001_ha,
> + pm8001_printk("GPIO Output Control Register:"
> + " = 0x%x\n", regVal));
> /* set GPIO-0 output control to tri-state */
> regVal &= 0xFFFFFFFC;
> pm8001_cw32(pm8001_ha, 2, GPIO_GPIO_0_0UTPUT_CTL_OFFSET, regVal);
> @@ -2928,7 +2928,7 @@ mpi_smp_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
> PM8001_IO_DBG(pm8001_ha, pm8001_printk("IO_SUCCESS\n"));
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAM_STAT_GOOD;
> - if (pm8001_dev)
> + if (pm8001_dev)
> pm8001_dev->running_req--;
> break;
> case IO_ABORTED:
> diff --git a/drivers/scsi/pm8001/pm8001_sas.c b/drivers/scsi/pm8001/pm8001_sas.c
> index 084f2fcced0a..88eef3b18e41 100644
> --- a/drivers/scsi/pm8001/pm8001_sas.c
> +++ b/drivers/scsi/pm8001/pm8001_sas.c
> @@ -740,8 +740,8 @@ static int pm8001_exec_internal_tmf_task(struct domain_device *dev,
> wait_for_completion(&task->slow_task->completion);
> if (pm8001_ha->chip_id != chip_8001) {
> pm8001_dev->setds_completion = &completion_setstate;
> - PM8001_CHIP_DISP->set_dev_state_req(pm8001_ha,
> - pm8001_dev, 0x01);
> + PM8001_CHIP_DISP->set_dev_state_req(pm8001_ha,
> + pm8001_dev, 0x01);
> wait_for_completion(&completion_setstate);
> }
> res = -TMF_RESP_FUNC_FAILED;
> diff --git a/drivers/scsi/pm8001/pm80xx_hwi.c b/drivers/scsi/pm8001/pm80xx_hwi.c
> index 63e4f7d34d6c..536d2b4384f8 100644
> --- a/drivers/scsi/pm8001/pm80xx_hwi.c
> +++ b/drivers/scsi/pm8001/pm80xx_hwi.c
> @@ -1316,7 +1316,7 @@ pm80xx_chip_soft_rst(struct pm8001_hba_info *pm8001_ha)
>
> static void pm80xx_hw_chip_rst(struct pm8001_hba_info *pm8001_ha)
> {
> - u32 i;
> + u32 i;
>
> PM8001_INIT_DBG(pm8001_ha,
> pm8001_printk("chip reset start\n"));
> @@ -4381,27 +4381,27 @@ static int pm80xx_chip_sata_req(struct pm8001_hba_info *pm8001_ha,
> sata_cmd.len = cpu_to_le32(task->total_xfer_len);
> sata_cmd.esgl = 0;
> }
> - /* scsi cdb */
> - sata_cmd.atapi_scsi_cdb[0] =
> - cpu_to_le32(((task->ata_task.atapi_packet[0]) |
> - (task->ata_task.atapi_packet[1] << 8) |
> - (task->ata_task.atapi_packet[2] << 16) |
> - (task->ata_task.atapi_packet[3] << 24)));
> - sata_cmd.atapi_scsi_cdb[1] =
> - cpu_to_le32(((task->ata_task.atapi_packet[4]) |
> - (task->ata_task.atapi_packet[5] << 8) |
> - (task->ata_task.atapi_packet[6] << 16) |
> - (task->ata_task.atapi_packet[7] << 24)));
> - sata_cmd.atapi_scsi_cdb[2] =
> - cpu_to_le32(((task->ata_task.atapi_packet[8]) |
> - (task->ata_task.atapi_packet[9] << 8) |
> - (task->ata_task.atapi_packet[10] << 16) |
> - (task->ata_task.atapi_packet[11] << 24)));
> - sata_cmd.atapi_scsi_cdb[3] =
> - cpu_to_le32(((task->ata_task.atapi_packet[12]) |
> - (task->ata_task.atapi_packet[13] << 8) |
> - (task->ata_task.atapi_packet[14] << 16) |
> - (task->ata_task.atapi_packet[15] << 24)));
> + /* scsi cdb */
> + sata_cmd.atapi_scsi_cdb[0] =
> + cpu_to_le32(((task->ata_task.atapi_packet[0]) |
> + (task->ata_task.atapi_packet[1] << 8) |
> + (task->ata_task.atapi_packet[2] << 16) |
> + (task->ata_task.atapi_packet[3] << 24)));
> + sata_cmd.atapi_scsi_cdb[1] =
> + cpu_to_le32(((task->ata_task.atapi_packet[4]) |
> + (task->ata_task.atapi_packet[5] << 8) |
> + (task->ata_task.atapi_packet[6] << 16) |
> + (task->ata_task.atapi_packet[7] << 24)));
> + sata_cmd.atapi_scsi_cdb[2] =
> + cpu_to_le32(((task->ata_task.atapi_packet[8]) |
> + (task->ata_task.atapi_packet[9] << 8) |
> + (task->ata_task.atapi_packet[10] << 16) |
> + (task->ata_task.atapi_packet[11] << 24)));
> + sata_cmd.atapi_scsi_cdb[3] =
> + cpu_to_le32(((task->ata_task.atapi_packet[12]) |
> + (task->ata_task.atapi_packet[13] << 8) |
> + (task->ata_task.atapi_packet[14] << 16) |
> + (task->ata_task.atapi_packet[15] << 24)));
> }
>
> /* Check for read log for failed drive and return */
> --
> 2.20.1
>
--
Jack Wang
Linux Kernel Developer
1&1 IONOS Cloud GmbH | Greifswalder Str. 207 | 10405 Berlin | Germany
Phone: +49 30 57700-8042 | Fax: +49 30 57700-8598
E-mail: jinpu.wang@xxxxxxxxxxxxxxx | Web: www.ionos.de
Head Office: Berlin, Germany
District Court Berlin Charlottenburg, Registration number: HRB 125506 B
Executive Management: Christoph Steffens, Matthias Steinberg, Achim Weiss
Member of United Internet
This e-mail may contain confidential and/or privileged information. If
you are not the intended recipient of this e-mail, you are hereby
notified that saving, distribution or use of the content of this
e-mail in any way is prohibited. If you have received this e-mail in
error, please notify the sender and delete the e-mail.
