Hi Dave,
> Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx> hat am 8. Oktober 2018 um 18:51 geschrieben:
>
>
> Hi Stefan.
>
> Thanks for forwarding as the linux-rpi-kernel list hasn't sent it to me as yet.
AFAIK every mail with more than 5 recipients will be delayed.
>
> On Mon, 8 Oct 2018 at 16:48, Stefan Wahren <stefan.wahren@xxxxxxxx> wrote:
> >
> > Hi Colin,
> >
> > Am 08.10.2018 um 16:50 schrieb Colin King:
> > > From: Colin Ian King <colin.king@xxxxxxxxxxxxx>
> > >
> > > Currently dev->colourfx.enable is being set twice, hence the first
> > > occurrance is redundant and can be removed, so remove it. This minor
> > > issue was introduced by commit 7b3ad5abf027 ("staging: Import the
> > > BCM2835 MMAL-based V4L2 camera driver.").
> > >
> > > Detected by CoverityScan CID#1419711 ("Unused value")
> > >
> > > Signed-off-by: Colin Ian King <colin.king@xxxxxxxxxxxxx>
> > > ---
> > > drivers/staging/vc04_services/bcm2835-camera/controls.c | 1 -
> > > 1 file changed, 1 deletion(-)
> > >
> > > diff --git a/drivers/staging/vc04_services/bcm2835-camera/controls.c b/drivers/staging/vc04_services/bcm2835-camera/controls.c
> > > index a2c55cb2192a..99831dd4365d 100644
> > > --- a/drivers/staging/vc04_services/bcm2835-camera/controls.c
> > > +++ b/drivers/staging/vc04_services/bcm2835-camera/controls.c
> > > @@ -588,7 +588,6 @@ static int ctrl_set_colfx(struct bm2835_mmal_dev *dev,
> > >
> > > control = &dev->component[MMAL_COMPONENT_CAMERA]->control;
> > >
> > > - dev->colourfx.enable = (ctrl->val & 0xff00) >> 8;
> > > dev->colourfx.enable = ctrl->val & 0xff;
> > >
> > > ret = vchiq_mmal_port_parameter_set(dev->instance, control,
> >
> > as long as the current behavior is correct, i'm okay with this patch.
> > But the byte masking looks suspicious, so i hope Dave can clarify that.
>
> It's writing to the wrong structure member.
> The function is used on the V4L2 control V4L2_CID_COLORFX_CBCR, which
> is defined as:
> V4L2_CID_COLORFX_CBCR (integer)
> Determines the Cb and Cr coefficients for V4L2_COLORFX_SET_CBCR color
> effect. Bits [7:0] of the supplied 32 bit value are interpreted as Cr
> component, bits [15:8] as Cb component and bits [31:16] must be zero.
>
> ctrl->val should therefore be setting dev->colourfx.u and
> dev->colourfx.v with those masks. dev->colourfx.enable field should
> have been set when going through ctrl_set_image_effect for contol
> V4L2_CID_COLORFX set to V4L2_COLORFX_SET_CBCR.
>
> I've confirmed with qv4l2 that that is what is wrong. That's only been
> lurking there for almost 5 years - shows how often these weirder
> effects get used.
> I don't mind whether Colin's patch gets merged and then fixed up, or
> drop Colin's patch and apply the correct logic via a new patch.
no this patch shouldn't be applied. Does it mean you want to send the proper one?
>
> Dave
