On Tue, Apr 03, 2018 at 08:49:57AM -0700, Joe Perches wrote:
> On Tue, 2018-04-03 at 15:45 +0200, Ladislav Michl wrote:
> > On Fri, Mar 30, 2018 at 04:44:20PM +0100, Colin King wrote:
> > > From: Colin Ian King <colin.king@xxxxxxxxxxxxx>
> >
> > Hello Colin,
> >
> > > Trivial fix to spelling mistake in pr_debug message text
> >
> > would you mind making this patch a bit less non-trivial and
> > change pr_debug to dev_dbg dropping Atmel_ssc_dai prefix?
>
> Presumably, then all the pr_<foo> calls should be changed.
Yes, that's what non-trivial means here :)
> Something like:
> ---
> sound/soc/atmel/atmel_ssc_dai.c | 38 ++++++++++++++++----------------------
> 1 file changed, 16 insertions(+), 22 deletions(-)
>
> diff --git a/sound/soc/atmel/atmel_ssc_dai.c b/sound/soc/atmel/atmel_ssc_dai.c
> index a1e2c5682dcd..594228156b2d 100644
> --- a/sound/soc/atmel/atmel_ssc_dai.c
> +++ b/sound/soc/atmel/atmel_ssc_dai.c
> @@ -291,11 +291,10 @@ static int atmel_ssc_startup(struct snd_pcm_substream *substream,
> int dir, dir_mask;
> int ret;
>
> - pr_debug("atmel_ssc_startup: SSC_SR=0x%x\n",
> - ssc_readl(ssc_p->ssc->regs, SR));
> + dev_dbg(dai->dev, "SSC_SR=0x%x\n", ssc_readl(ssc_p->ssc->regs, SR));
>
> /* Enable PMC peripheral clock for this SSC */
> - pr_debug("atmel_ssc_dai: Starting clock\n");
> + dev_dbg(dai->dev, "Starting clock\n");
> clk_enable(ssc_p->ssc->clk);
> ssc_p->mck_rate = clk_get_rate(ssc_p->ssc->clk);
>
> @@ -385,7 +384,7 @@ static void atmel_ssc_shutdown(struct snd_pcm_substream *substream,
> spin_unlock_irq(&ssc_p->lock);
>
> /* Shutdown the SSC clock. */
> - pr_debug("atmel_ssc_dai: Stopping clock\n");
> + dev_dbg(dai->dev, "Stopping clock\n");
> clk_disable(ssc_p->ssc->clk);
> }
>
> @@ -794,13 +793,12 @@ static int atmel_ssc_hw_params(struct snd_pcm_substream *substream,
> break;
>
> default:
> - printk(KERN_WARNING "atmel_ssc_dai: unsupported DAI format 0x%x\n",
> - ssc_p->daifmt);
> + dev_warn(dai->dev, "unsupported DAI format 0x%x\n",
> + ssc_p->daifmt);
> return -EINVAL;
> }
> - pr_debug("atmel_ssc_hw_params: "
> - "RCMR=%08x RFMR=%08x TCMR=%08x TFMR=%08x\n",
> - rcmr, rfmr, tcmr, tfmr);
> + dev_dbg(dai->dev, "RCMR=%08x RFMR=%08x TCMR=%08x TFMR=%08x\n",
> + rcmr, rfmr, tcmr, tfmr);
>
> if (!ssc_p->initialized) {
> if (!ssc_p->ssc->pdata->use_dma) {
> @@ -818,9 +816,8 @@ static int atmel_ssc_hw_params(struct snd_pcm_substream *substream,
> ret = request_irq(ssc_p->ssc->irq, atmel_ssc_interrupt, 0,
> ssc_p->name, ssc_p);
> if (ret < 0) {
> - printk(KERN_WARNING
> - "atmel_ssc_dai: request_irq failure\n");
> - pr_debug("Atmel_ssc_dai: Stoping clock\n");
> + dev_warn(dai->dev, "request_irq failure\n");
> + dev_dbg(dai->dev, "Stopping clock\n");
> clk_disable(ssc_p->ssc->clk);
> return ret;
> }
> @@ -839,7 +836,7 @@ static int atmel_ssc_hw_params(struct snd_pcm_substream *substream,
> ssc_writel(ssc_p->ssc->regs, TCMR, tcmr);
> ssc_writel(ssc_p->ssc->regs, TFMR, tfmr);
>
> - pr_debug("atmel_ssc_dai,hw_params: SSC initialized\n");
> + dev_dbg(dai->dev, "SSC initialized\n");
> return 0;
> }
>
> @@ -862,9 +859,9 @@ static int atmel_ssc_prepare(struct snd_pcm_substream *substream,
> ssc_writel(ssc_p->ssc->regs, CR, dma_params->mask->ssc_disable);
> ssc_writel(ssc_p->ssc->regs, IDR, dma_params->mask->ssc_error);
>
> - pr_debug("%s enabled SSC_SR=0x%08x\n",
> - dir ? "receive" : "transmit",
> - ssc_readl(ssc_p->ssc->regs, SR));
> + dev_dbg(dai->dev, "%s enabled SSC_SR=0x%08x\n",
> + dir ? "receive" : "transmit",
> + ssc_readl(ssc_p->ssc->regs, SR));
> return 0;
> }
>
> @@ -1050,21 +1047,18 @@ static void asoc_ssc_exit(struct device *dev)
> int atmel_ssc_set_audio(int ssc_id)
> {
> struct ssc_device *ssc;
> - int ret;
>
> /* If we can grab the SSC briefly to parent the DAI device off it */
> ssc = ssc_request(ssc_id);
> if (IS_ERR(ssc)) {
> pr_err("Unable to parent ASoC SSC DAI on SSC: %ld\n",
> - PTR_ERR(ssc));
> + PTR_ERR(ssc));
Well, these are usefull, but unrelated changes. But while there, above
pr_error deserves to be replaced with dev_err as well.
> return PTR_ERR(ssc);
> - } else {
> - ssc_info[ssc_id].ssc = ssc;
> }
>
> - ret = asoc_ssc_init(&ssc->pdev->dev);
> + ssc_info[ssc_id].ssc = ssc;
>
> - return ret;
> + return asoc_ssc_init(&ssc->pdev->dev);
> }
> EXPORT_SYMBOL_GPL(atmel_ssc_set_audio);
>
> _______________________________________________
> Alsa-devel mailing list
> Alsa-devel@xxxxxxxxxxxxxxxx
> http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
--
To unsubscribe from this list: send the line "unsubscribe kernel-janitors" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
