From: Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
Date: Wed, 14 Mar 2018 16:06:49 +0100
* Add jump targets so that a call of the function "mutex_unlock" is stored
only once in these function implementations.
* Replace 19 calls by goto statements.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
---
drivers/iio/gyro/bmg160_core.c | 103 ++++++++++++++++++-----------------------
1 file changed, 45 insertions(+), 58 deletions(-)
diff --git a/drivers/iio/gyro/bmg160_core.c b/drivers/iio/gyro/bmg160_core.c
index 63ca31628a93..fa367fd7bc8c 100644
--- a/drivers/iio/gyro/bmg160_core.c
+++ b/drivers/iio/gyro/bmg160_core.c
@@ -499,21 +499,19 @@ static int bmg160_get_temp(struct bmg160_data *data, int *val)
mutex_lock(&data->mutex);
ret = bmg160_set_power_state(data, true);
- if (ret < 0) {
- mutex_unlock(&data->mutex);
- return ret;
- }
+ if (ret < 0)
+ goto unlock;
ret = regmap_read(data->regmap, BMG160_REG_TEMP, &raw_val);
if (ret < 0) {
dev_err(dev, "Error reading reg_temp\n");
bmg160_set_power_state(data, false);
- mutex_unlock(&data->mutex);
- return ret;
+ goto unlock;
}
*val = sign_extend32(raw_val, 7);
ret = bmg160_set_power_state(data, false);
+unlock:
mutex_unlock(&data->mutex);
if (ret < 0)
return ret;
@@ -529,22 +527,20 @@ static int bmg160_get_axis(struct bmg160_data *data, int axis, int *val)
mutex_lock(&data->mutex);
ret = bmg160_set_power_state(data, true);
- if (ret < 0) {
- mutex_unlock(&data->mutex);
- return ret;
- }
+ if (ret < 0)
+ goto unlock;
ret = regmap_bulk_read(data->regmap, BMG160_AXIS_TO_REG(axis), &raw_val,
sizeof(raw_val));
if (ret < 0) {
dev_err(dev, "Error reading axis %d\n", axis);
bmg160_set_power_state(data, false);
- mutex_unlock(&data->mutex);
- return ret;
+ goto unlock;
}
*val = sign_extend32(le16_to_cpu(raw_val), 15);
ret = bmg160_set_power_state(data, false);
+unlock:
mutex_unlock(&data->mutex);
if (ret < 0)
return ret;
@@ -632,19 +628,16 @@ static int bmg160_write_raw(struct iio_dev *indio_dev,
* mode to power on for other writes.
*/
ret = bmg160_set_power_state(data, true);
- if (ret < 0) {
- mutex_unlock(&data->mutex);
- return ret;
- }
+ if (ret < 0)
+ goto unlock;
+
ret = bmg160_set_bw(data, val);
if (ret < 0) {
bmg160_set_power_state(data, false);
- mutex_unlock(&data->mutex);
- return ret;
+ goto unlock;
}
- ret = bmg160_set_power_state(data, false);
- mutex_unlock(&data->mutex);
- return ret;
+
+ goto set_power_state;
case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY:
if (val2)
return -EINVAL;
@@ -653,18 +646,15 @@ static int bmg160_write_raw(struct iio_dev *indio_dev,
ret = bmg160_set_power_state(data, true);
if (ret < 0) {
bmg160_set_power_state(data, false);
- mutex_unlock(&data->mutex);
- return ret;
+ goto unlock;
}
ret = bmg160_set_filter(data, val);
if (ret < 0) {
bmg160_set_power_state(data, false);
- mutex_unlock(&data->mutex);
- return ret;
+ goto unlock;
}
- ret = bmg160_set_power_state(data, false);
- mutex_unlock(&data->mutex);
- return ret;
+
+ goto set_power_state;
case IIO_CHAN_INFO_SCALE:
if (val)
return -EINVAL;
@@ -672,24 +662,27 @@ static int bmg160_write_raw(struct iio_dev *indio_dev,
mutex_lock(&data->mutex);
/* Refer to comments above for the suspend mode ops */
ret = bmg160_set_power_state(data, true);
- if (ret < 0) {
- mutex_unlock(&data->mutex);
- return ret;
- }
+ if (ret < 0)
+ goto unlock;
+
ret = bmg160_set_scale(data, val2);
if (ret < 0) {
bmg160_set_power_state(data, false);
- mutex_unlock(&data->mutex);
- return ret;
+ goto unlock;
}
- ret = bmg160_set_power_state(data, false);
- mutex_unlock(&data->mutex);
- return ret;
+
+ goto set_power_state;
default:
return -EINVAL;
}
return -EINVAL;
+
+set_power_state:
+ ret = bmg160_set_power_state(data, false);
+unlock:
+ mutex_unlock(&data->mutex);
+ return ret;
}
static int bmg160_read_event(struct iio_dev *indio_dev,
@@ -763,8 +756,8 @@ static int bmg160_write_event_config(struct iio_dev *indio_dev,
if (!state && data->motion_trigger_on) {
data->ev_enable_state = 0;
- mutex_unlock(&data->mutex);
- return 0;
+ ret = 0;
+ goto unlock;
}
/*
* We will expect the enable and disable to do operation in
@@ -776,22 +769,19 @@ static int bmg160_write_event_config(struct iio_dev *indio_dev,
* is always on so sequence doesn't matter
*/
ret = bmg160_set_power_state(data, state);
- if (ret < 0) {
- mutex_unlock(&data->mutex);
- return ret;
- }
+ if (ret < 0)
+ goto unlock;
ret = bmg160_setup_any_motion_interrupt(data, state);
if (ret < 0) {
bmg160_set_power_state(data, false);
- mutex_unlock(&data->mutex);
- return ret;
+ goto unlock;
}
data->ev_enable_state = state;
+unlock:
mutex_unlock(&data->mutex);
-
- return 0;
+ return ret;
}
static IIO_CONST_ATTR_SAMP_FREQ_AVAIL("100 200 400 1000 2000");
@@ -919,8 +909,8 @@ static int bmg160_data_rdy_trigger_set_state(struct iio_trigger *trig,
if (!state && data->ev_enable_state && data->motion_trigger_on) {
data->motion_trigger_on = false;
- mutex_unlock(&data->mutex);
- return 0;
+ ret = 0;
+ goto unlock;
}
/*
@@ -928,27 +918,24 @@ static int bmg160_data_rdy_trigger_set_state(struct iio_trigger *trig,
* enable/disable operation order
*/
ret = bmg160_set_power_state(data, state);
- if (ret < 0) {
- mutex_unlock(&data->mutex);
- return ret;
- }
+ if (ret < 0)
+ goto unlock;
+
if (data->motion_trig == trig)
ret = bmg160_setup_any_motion_interrupt(data, state);
else
ret = bmg160_setup_new_data_interrupt(data, state);
if (ret < 0) {
bmg160_set_power_state(data, false);
- mutex_unlock(&data->mutex);
- return ret;
+ goto unlock;
}
if (data->motion_trig == trig)
data->motion_trigger_on = state;
else
data->dready_trigger_on = state;
-
+unlock:
mutex_unlock(&data->mutex);
-
- return 0;
+ return ret;
}
static const struct iio_trigger_ops bmg160_trigger_ops = {
--
2.16.2
--
To unsubscribe from this list: send the line "unsubscribe kernel-janitors" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
