Re: [PATCH] iio:magnetometer: Remove duplications in iio_chan_spec

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 03/12, Pandruvada, Srinivas wrote:
> On Wed, 2018-03-07 at 20:20 +0000, Jonathan Cameron wrote:
> > On Tue, 6 Mar 2018 09:00:11 -0300
> > Rodrigo Siqueira <rodrigosiqueiramelo@xxxxxxxxx> wrote:
> > 
> > > The magn_3d_channels array has multiple declarations of
> > > iio_chan_spec.
> > > Most of the iio_chan_spec are very similar, changing only by the
> > > .type
> > > and .channel2 field. This patch reduces the code duplication by
> > > adding a
> > > macro that can replace the iio_chan_spec  repetitions in the
> > > magn_3d_channels array.
> 
> I don't think it was tested otherwise channel registration would have
> failed. See below.

Hi,

Sorry for the mistake, I did not test it because I don't have the
hardware. I'll be more cautious.

Thanks for your review. I will send a v2.
 
> > > 
> > > Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@xxxxxxxxx>
> > 
> > Whilst this looks fine to me, I'd like Srinivas to take a look before
> > I apply it as this is his driver.  Please do make sure to cc the
> > author.
> > Whilst many such email addresses bounce as they have moved on they
> > don't always.
> > 
> > Jonathan
> > 
> > > ---
> > >  drivers/iio/magnetometer/hid-sensor-magn-3d.c | 83 ++++++---------
> > > ------------
> > >  1 file changed, 19 insertions(+), 64 deletions(-)
> > > 
> > > diff --git a/drivers/iio/magnetometer/hid-sensor-magn-3d.c
> > > b/drivers/iio/magnetometer/hid-sensor-magn-3d.c
> > > index a1fd9d591818..fff64711a6c8 100644
> > > --- a/drivers/iio/magnetometer/hid-sensor-magn-3d.c
> > > +++ b/drivers/iio/magnetometer/hid-sensor-magn-3d.c
> > > @@ -74,72 +74,27 @@ static const u32
> > > magn_3d_addresses[MAGN_3D_CHANNEL_MAX] = {
> > >  	HID_USAGE_SENSOR_ORIENT_TRUE_NORTH,
> > >  };
> > >  
> > > +#define HID_SENSOR_MAGN_3D_AXIS_CHANNEL(channel_type,
> > > characteristic)	\
> > > +	{								
> > > \
> > > +		.type = channel_type,				
> > > 	\
> > > +		.modified = 1,					
> > > 	\
> > > +		.channel2 = characteristic,			
> > > 	\
> > > +		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),	
> > > 	\
> > > +		.info_mask_shared_by_type =
> > > BIT(IIO_CHAN_INFO_OFFSET) | \
> > > +					BIT(IIO_CHAN_INFO_SCALE) |
> > > 	\
> > > +					BIT(IIO_CHAN_INFO_SAMP_FRE
> > > Q) |	\
> > > +					BIT(IIO_CHAN_INFO_HYSTERES
> > > IS),	\
> > > +	}								
> > > \
> > > +
> > >  /* Channel definitions */
> > >  static const struct iio_chan_spec magn_3d_channels[] = {
> > > -	{
> > > -		.type = IIO_MAGN,
> > > -		.modified = 1,
> > > -		.channel2 = IIO_MOD_X,
> > > -		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
> > > -		.info_mask_shared_by_type =
> > > BIT(IIO_CHAN_INFO_OFFSET) |
> > > -		BIT(IIO_CHAN_INFO_SCALE) |
> > > -		BIT(IIO_CHAN_INFO_SAMP_FREQ) |
> > > -		BIT(IIO_CHAN_INFO_HYSTERESIS),
> > > -	}, {
> > > -		.type = IIO_MAGN,
> > > -		.modified = 1,
> > > -		.channel2 = IIO_MOD_Y,
> > > -		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
> > > -		.info_mask_shared_by_type =
> > > BIT(IIO_CHAN_INFO_OFFSET) |
> > > -		BIT(IIO_CHAN_INFO_SCALE) |
> > > -		BIT(IIO_CHAN_INFO_SAMP_FREQ) |
> > > -		BIT(IIO_CHAN_INFO_HYSTERESIS),
> > > -	}, {
> > > -		.type = IIO_MAGN,
> > > -		.modified = 1,
> > > -		.channel2 = IIO_MOD_Z,
> > > -		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
> > > -		.info_mask_shared_by_type =
> > > BIT(IIO_CHAN_INFO_OFFSET) |
> > > -		BIT(IIO_CHAN_INFO_SCALE) |
> > > -		BIT(IIO_CHAN_INFO_SAMP_FREQ) |
> > > -		BIT(IIO_CHAN_INFO_HYSTERESIS),
> > > -	}, {
> > > -		.type = IIO_ROT,
> > > -		.modified = 1,
> > > -		.channel2 = IIO_MOD_NORTH_MAGN_TILT_COMP,
> > > -		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
> > > -		.info_mask_shared_by_type =
> > > BIT(IIO_CHAN_INFO_OFFSET) |
> > > -		BIT(IIO_CHAN_INFO_SCALE) |
> > > -		BIT(IIO_CHAN_INFO_SAMP_FREQ) |
> > > -		BIT(IIO_CHAN_INFO_HYSTERESIS),
> > > -	}, {
> > > -		.type = IIO_ROT,
> > > -		.modified = 1,
> > > -		.channel2 = IIO_MOD_NORTH_TRUE_TILT_COMP,
> > > -		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
> > > -		.info_mask_shared_by_type =
> > > BIT(IIO_CHAN_INFO_OFFSET) |
> > > -		BIT(IIO_CHAN_INFO_SCALE) |
> > > -		BIT(IIO_CHAN_INFO_SAMP_FREQ) |
> > > -		BIT(IIO_CHAN_INFO_HYSTERESIS),
> > > -	}, {
> > > -		.type = IIO_ROT,
> > > -		.modified = 1,
> > > -		.channel2 = IIO_MOD_NORTH_MAGN,
> > > -		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
> > > -		.info_mask_shared_by_type =
> > > BIT(IIO_CHAN_INFO_OFFSET) |
> > > -		BIT(IIO_CHAN_INFO_SCALE) |
> > > -		BIT(IIO_CHAN_INFO_SAMP_FREQ) |
> > > -		BIT(IIO_CHAN_INFO_HYSTERESIS),
> > > -	}, {
> > > -		.type = IIO_ROT,
> > > -		.modified = 1,
> > > -		.channel2 = IIO_MOD_NORTH_TRUE,
> > > -		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
> > > -		.info_mask_shared_by_type =
> > > BIT(IIO_CHAN_INFO_OFFSET) |
> > > -		BIT(IIO_CHAN_INFO_SCALE) |
> > > -		BIT(IIO_CHAN_INFO_SAMP_FREQ) |
> > > -		BIT(IIO_CHAN_INFO_HYSTERESIS),
> > > -	}
> > > +	HID_SENSOR_MAGN_3D_AXIS_CHANNEL(IIO_MAGN, IIO_MOD_X),
> > > +	HID_SENSOR_MAGN_3D_AXIS_CHANNEL(IIO_MAGN, IIO_MOD_Y),
> > > +	HID_SENSOR_MAGN_3D_AXIS_CHANNEL(IIO_MAGN, IIO_MOD_Z),
> > > +	HID_SENSOR_MAGN_3D_AXIS_CHANNEL(IIO_ROT,
> > > IIO_MOD_NORTH_MAGN_TILT_COMP),
> > > +	HID_SENSOR_MAGN_3D_AXIS_CHANNEL(IIO_ROT,
> > > IIO_MOD_NORTH_TRUE_TILT_COMP),
> > > +	HID_SENSOR_MAGN_3D_AXIS_CHANNEL(IIO_ROT,
> > > IIO_MOD_NORTH_MAGN),
> > > +	HID_SENSOR_MAGN_3D_AXIS_CHANNEL(IIO_ROT,
> > > IIO_MOD_NORTH_MAGN),
> It should be 
> HID_SENSOR_MAGN_3D_AXIS_CHANNEL(IIO_ROT, IIO_MOD_NORTH_TRUE)
> 
> Thanks,
> Srinivas


--
To unsubscribe from this list: send the line "unsubscribe kernel-janitors" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Kernel Development]     [Kernel Announce]     [Kernel Newbies]     [Linux Networking Development]     [Share Photos]     [IDE]     [Security]     [Git]     [Netfilter]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Device Mapper]

  Powered by Linux