From: Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
Date: Tue, 26 Sep 2017 19:46:51 +0200
Use space characters at some source code places according to
the Linux coding style convention.
Signed-off-by: Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
---
drivers/clk/clk-u300.c | 64 +++++++++++++++++++++++++-------------------------
1 file changed, 32 insertions(+), 32 deletions(-)
diff --git a/drivers/clk/clk-u300.c b/drivers/clk/clk-u300.c
index ae78461c7836..b36ca3a14c42 100644
--- a/drivers/clk/clk-u300.c
+++ b/drivers/clk/clk-u300.c
@@ -229,15 +229,15 @@
#define U300_SYSCON_S0CCR_CLOCK_FREQ_MASK (0x01E0)
#define U300_SYSCON_S0CCR_CLOCK_SELECT_MASK (0x001E)
#define U300_SYSCON_S0CCR_CLOCK_ENABLE (0x0001)
-#define U300_SYSCON_S0CCR_SEL_MCLK (0x8<<1)
-#define U300_SYSCON_S0CCR_SEL_ACC_FSM_CLK (0xA<<1)
-#define U300_SYSCON_S0CCR_SEL_PLL60_48_CLK (0xC<<1)
-#define U300_SYSCON_S0CCR_SEL_PLL60_60_CLK (0xD<<1)
-#define U300_SYSCON_S0CCR_SEL_ACC_PLL208_CLK (0xE<<1)
-#define U300_SYSCON_S0CCR_SEL_APP_PLL13_CLK (0x0<<1)
-#define U300_SYSCON_S0CCR_SEL_APP_FSM_CLK (0x2<<1)
-#define U300_SYSCON_S0CCR_SEL_RTC_CLK (0x4<<1)
-#define U300_SYSCON_S0CCR_SEL_APP_PLL208_CLK (0x6<<1)
+#define U300_SYSCON_S0CCR_SEL_MCLK (0x8 << 1)
+#define U300_SYSCON_S0CCR_SEL_ACC_FSM_CLK (0xA << 1)
+#define U300_SYSCON_S0CCR_SEL_PLL60_48_CLK (0xC << 1)
+#define U300_SYSCON_S0CCR_SEL_PLL60_60_CLK (0xD << 1)
+#define U300_SYSCON_S0CCR_SEL_ACC_PLL208_CLK (0xE << 1)
+#define U300_SYSCON_S0CCR_SEL_APP_PLL13_CLK (0x0 << 1)
+#define U300_SYSCON_S0CCR_SEL_APP_FSM_CLK (0x2 << 1)
+#define U300_SYSCON_S0CCR_SEL_RTC_CLK (0x4 << 1)
+#define U300_SYSCON_S0CCR_SEL_APP_PLL208_CLK (0x6 << 1)
/* SYS_1_CLK_CONTROL second clock control 16 bit (R/W) */
#define U300_SYSCON_S1CCR (0x124)
#define U300_SYSCON_S1CCR_FIELD_MASK (0x43FF)
@@ -247,15 +247,15 @@
#define U300_SYSCON_S1CCR_CLOCK_FREQ_MASK (0x01E0)
#define U300_SYSCON_S1CCR_CLOCK_SELECT_MASK (0x001E)
#define U300_SYSCON_S1CCR_CLOCK_ENABLE (0x0001)
-#define U300_SYSCON_S1CCR_SEL_MCLK (0x8<<1)
-#define U300_SYSCON_S1CCR_SEL_ACC_FSM_CLK (0xA<<1)
-#define U300_SYSCON_S1CCR_SEL_PLL60_48_CLK (0xC<<1)
-#define U300_SYSCON_S1CCR_SEL_PLL60_60_CLK (0xD<<1)
-#define U300_SYSCON_S1CCR_SEL_ACC_PLL208_CLK (0xE<<1)
-#define U300_SYSCON_S1CCR_SEL_ACC_PLL13_CLK (0x0<<1)
-#define U300_SYSCON_S1CCR_SEL_APP_FSM_CLK (0x2<<1)
-#define U300_SYSCON_S1CCR_SEL_RTC_CLK (0x4<<1)
-#define U300_SYSCON_S1CCR_SEL_APP_PLL208_CLK (0x6<<1)
+#define U300_SYSCON_S1CCR_SEL_MCLK (0x8 << 1)
+#define U300_SYSCON_S1CCR_SEL_ACC_FSM_CLK (0xA << 1)
+#define U300_SYSCON_S1CCR_SEL_PLL60_48_CLK (0xC << 1)
+#define U300_SYSCON_S1CCR_SEL_PLL60_60_CLK (0xD << 1)
+#define U300_SYSCON_S1CCR_SEL_ACC_PLL208_CLK (0xE << 1)
+#define U300_SYSCON_S1CCR_SEL_ACC_PLL13_CLK (0x0 << 1)
+#define U300_SYSCON_S1CCR_SEL_APP_FSM_CLK (0x2 << 1)
+#define U300_SYSCON_S1CCR_SEL_RTC_CLK (0x4 << 1)
+#define U300_SYSCON_S1CCR_SEL_APP_PLL208_CLK (0x6 << 1)
/* SYS_2_CLK_CONTROL third clock contol 16 bit (R/W) */
#define U300_SYSCON_S2CCR (0x128)
#define U300_SYSCON_S2CCR_FIELD_MASK (0xC3FF)
@@ -266,15 +266,15 @@
#define U300_SYSCON_S2CCR_CLOCK_FREQ_MASK (0x01E0)
#define U300_SYSCON_S2CCR_CLOCK_SELECT_MASK (0x001E)
#define U300_SYSCON_S2CCR_CLOCK_ENABLE (0x0001)
-#define U300_SYSCON_S2CCR_SEL_MCLK (0x8<<1)
-#define U300_SYSCON_S2CCR_SEL_ACC_FSM_CLK (0xA<<1)
-#define U300_SYSCON_S2CCR_SEL_PLL60_48_CLK (0xC<<1)
-#define U300_SYSCON_S2CCR_SEL_PLL60_60_CLK (0xD<<1)
-#define U300_SYSCON_S2CCR_SEL_ACC_PLL208_CLK (0xE<<1)
-#define U300_SYSCON_S2CCR_SEL_ACC_PLL13_CLK (0x0<<1)
-#define U300_SYSCON_S2CCR_SEL_APP_FSM_CLK (0x2<<1)
-#define U300_SYSCON_S2CCR_SEL_RTC_CLK (0x4<<1)
-#define U300_SYSCON_S2CCR_SEL_APP_PLL208_CLK (0x6<<1)
+#define U300_SYSCON_S2CCR_SEL_MCLK (0x8 << 1)
+#define U300_SYSCON_S2CCR_SEL_ACC_FSM_CLK (0xA << 1)
+#define U300_SYSCON_S2CCR_SEL_PLL60_48_CLK (0xC << 1)
+#define U300_SYSCON_S2CCR_SEL_PLL60_60_CLK (0xD << 1)
+#define U300_SYSCON_S2CCR_SEL_ACC_PLL208_CLK (0xE << 1)
+#define U300_SYSCON_S2CCR_SEL_ACC_PLL13_CLK (0x0 << 1)
+#define U300_SYSCON_S2CCR_SEL_APP_FSM_CLK (0x2 << 1)
+#define U300_SYSCON_S2CCR_SEL_RTC_CLK (0x4 << 1)
+#define U300_SYSCON_S2CCR_SEL_APP_PLL208_CLK (0x6 << 1)
/* SC_PLL_IRQ_CONTROL 16bit (R/W) */
#define U300_SYSCON_PICR (0x0130)
#define U300_SYSCON_PICR_MASK (0x00FF)
@@ -568,14 +568,14 @@ syscon_clk_recalc_rate(struct clk_hw *hw,
struct clk_syscon *sclk = to_syscon(hw);
u16 perf = syscon_get_perf();
- switch(sclk->clk_val) {
+ switch (sclk->clk_val) {
case U300_SYSCON_SBCER_FAST_BRIDGE_CLK_EN:
case U300_SYSCON_SBCER_I2C0_CLK_EN:
case U300_SYSCON_SBCER_I2C1_CLK_EN:
case U300_SYSCON_SBCER_MMC_CLK_EN:
case U300_SYSCON_SBCER_SPI_CLK_EN:
/* The FAST clocks have one progression */
- switch(perf) {
+ switch (perf) {
case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER:
case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW:
return 13000000;
@@ -586,7 +586,7 @@ syscon_clk_recalc_rate(struct clk_hw *hw,
case U300_SYSCON_SBCER_NANDIF_CLK_EN:
case U300_SYSCON_SBCER_XGAM_CLK_EN:
/* AMBA interconnect peripherals */
- switch(perf) {
+ switch (perf) {
case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER:
case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW:
return 6500000;
@@ -598,7 +598,7 @@ syscon_clk_recalc_rate(struct clk_hw *hw,
case U300_SYSCON_SBCER_SEMI_CLK_EN:
case U300_SYSCON_SBCER_EMIF_CLK_EN:
/* EMIF speeds */
- switch(perf) {
+ switch (perf) {
case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER:
case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW:
return 13000000;
@@ -609,7 +609,7 @@ syscon_clk_recalc_rate(struct clk_hw *hw,
}
case U300_SYSCON_SBCER_CPU_CLK_EN:
/* And the fast CPU clock */
- switch(perf) {
+ switch (perf) {
case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER:
case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW:
return 13000000;
--
2.14.1
--
To unsubscribe from this list: send the line "unsubscribe kernel-janitors" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
