Re: [PATCH 4/6] [media] go7007: Use common error handling code in s2250_probe()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Sep 18, 2017 at 03:57:21PM +0200, SF Markus Elfring wrote:
> From: Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
> Date: Mon, 18 Sep 2017 13:50:45 +0200
> 
> Adjust jump targets so that a bit of exception handling can be better
> reused at the end of this function.
> 
> This refactoring might fix also an error situation where the
> function "i2c_unregister_device" was not called after a software failure
> was noticed by the data member "hdl.error".
> 
> Signed-off-by: Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
> ---
>  drivers/media/usb/go7007/s2250-board.c | 37 +++++++++++++++++-----------------
>  1 file changed, 18 insertions(+), 19 deletions(-)
> 
> diff --git a/drivers/media/usb/go7007/s2250-board.c b/drivers/media/usb/go7007/s2250-board.c
> index 1fd4c09dd516..1bd9a7f2e7a3 100644
> --- a/drivers/media/usb/go7007/s2250-board.c
> +++ b/drivers/media/usb/go7007/s2250-board.c
> @@ -510,6 +510,7 @@ static int s2250_probe(struct i2c_client *client,
>  	u8 *data;
>  	struct go7007 *go = i2c_get_adapdata(adapter);
>  	struct go7007_usb *usb = go->hpi_context;
> +	int code;

It should be called "int rc" to match the rest of the driver.  "ret" or
"err" would also have been acceptable.

>  
>  	audio = i2c_new_dummy(adapter, TLV320_ADDRESS >> 1);
>  	if (!audio)
> @@ -517,8 +518,8 @@ static int s2250_probe(struct i2c_client *client,
>  
>  	state = kzalloc(sizeof(*state), GFP_KERNEL);
>  	if (!state) {
> -		i2c_unregister_device(audio);
> -		return -ENOMEM;
> +		code = -ENOMEM;
> +		goto unregister_device;
>  	}
>  
>  	sd = &state->sd;
> @@ -538,11 +539,8 @@ static int s2250_probe(struct i2c_client *client,
>  		V4L2_CID_HUE, -512, 511, 1, 0);
>  	sd->ctrl_handler = &state->hdl;
>  	if (state->hdl.error) {
> -		int err = state->hdl.error;
> -
> -		v4l2_ctrl_handler_free(&state->hdl);
> -		kfree(state);
> -		return err;
> +		code = state->hdl.error;
> +		goto free_handler;
>  	}
>  
>  	state->std = V4L2_STD_NTSC;
> @@ -555,17 +553,13 @@ static int s2250_probe(struct i2c_client *client,
>  	/* initialize the audio */
>  	if (write_regs(audio, aud_regs) < 0) {
>  		dev_err(&client->dev, "error initializing audio\n");
> -		goto fail;
> +		goto e_io;

Preserve the error code.

regards,
dan carpenter

--
To unsubscribe from this list: send the line "unsubscribe kernel-janitors" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Kernel Development]     [Kernel Announce]     [Kernel Newbies]     [Linux Networking Development]     [Share Photos]     [IDE]     [Security]     [Git]     [Netfilter]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Device Mapper]

  Powered by Linux