Re: [PATCH] staging: dgnc: fix camelcase of SerialDriver and PrintDriver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



2016-03-22 21:21 GMT+09:00 walter harms <wharms@xxxxxx>:
>
> You have send this patch before, right ?
> then it is a good custom to have something like: [Patch V2] in the
> subject line. In the comment you should write somethink like
>
> v2:  fix withspace damage
> v1:  fix issue
>
> Otherwise none of the reviewer maintainer will see what was changes.
> Sometimes patch run a few rounds before applied.
Yes, you're right.

I should leave a message.. sorry.

I had been making many patches, I think, until last year.
But I didn't contribute to linux kernel for long time(maybe one year.. :-( )
And I made mistakes while sending patches.. I was breaking the working
code because of this.

So I want to start over from making minor patches like fixing coding style.

Now, this patch was taken by Greg.
And also I will try to fix other coding style first of this module.
(I had been fixing issues dgap module that was removed in linux-next
branch. dgnc has same issues what dgap has.
I can also fix issues in dgnc module.)

Thanks for comment.

regards,
Daeseok.
>
> just my two cents
>
> re,
>  wh
>
> Am 22.03.2016 10:20, schrieb Daeseok Youn:
>> fix the checkpatch.pl warning about CamelCase.
>>
>> Signed-off-by: Daeseok Youn <daeseok.youn@xxxxxxxxx>
>> ---
>>  drivers/staging/dgnc/dgnc_driver.h |   4 +-
>>  drivers/staging/dgnc/dgnc_tty.c    | 118 ++++++++++++++++++-------------------
>>  2 files changed, 61 insertions(+), 61 deletions(-)
>>
>> diff --git a/drivers/staging/dgnc/dgnc_driver.h b/drivers/staging/dgnc/dgnc_driver.h
>> index e4be81b..953c891 100644
>> --- a/drivers/staging/dgnc/dgnc_driver.h
>> +++ b/drivers/staging/dgnc/dgnc_driver.h
>> @@ -202,9 +202,9 @@ struct dgnc_board {
>>                                                * to our channels.
>>                                                */
>>
>> -     struct tty_driver       SerialDriver;
>> +     struct tty_driver serial_driver;
>>       char            SerialName[200];
>> -     struct tty_driver       PrintDriver;
>> +     struct tty_driver print_driver;
>>       char            PrintName[200];
>>
>>       bool            dgnc_Major_Serial_Registered;
>> diff --git a/drivers/staging/dgnc/dgnc_tty.c b/drivers/staging/dgnc/dgnc_tty.c
>> index bcd2bdf..081ac75 100644
>> --- a/drivers/staging/dgnc/dgnc_tty.c
>> +++ b/drivers/staging/dgnc/dgnc_tty.c
>> @@ -178,20 +178,20 @@ int dgnc_tty_register(struct dgnc_board *brd)
>>  {
>>       int rc = 0;
>>
>> -     brd->SerialDriver.magic = TTY_DRIVER_MAGIC;
>> +     brd->serial_driver.magic = TTY_DRIVER_MAGIC;
>>
>>       snprintf(brd->SerialName, MAXTTYNAMELEN, "tty_dgnc_%d_", brd->boardnum);
>>
>> -     brd->SerialDriver.name = brd->SerialName;
>> -     brd->SerialDriver.name_base = 0;
>> -     brd->SerialDriver.major = 0;
>> -     brd->SerialDriver.minor_start = 0;
>> -     brd->SerialDriver.num = brd->maxports;
>> -     brd->SerialDriver.type = TTY_DRIVER_TYPE_SERIAL;
>> -     brd->SerialDriver.subtype = SERIAL_TYPE_NORMAL;
>> -     brd->SerialDriver.init_termios = DgncDefaultTermios;
>> -     brd->SerialDriver.driver_name = DRVSTR;
>> -     brd->SerialDriver.flags = (TTY_DRIVER_REAL_RAW |
>> +     brd->serial_driver.name = brd->SerialName;
>> +     brd->serial_driver.name_base = 0;
>> +     brd->serial_driver.major = 0;
>> +     brd->serial_driver.minor_start = 0;
>> +     brd->serial_driver.num = brd->maxports;
>> +     brd->serial_driver.type = TTY_DRIVER_TYPE_SERIAL;
>> +     brd->serial_driver.subtype = SERIAL_TYPE_NORMAL;
>> +     brd->serial_driver.init_termios = DgncDefaultTermios;
>> +     brd->serial_driver.driver_name = DRVSTR;
>> +     brd->serial_driver.flags = (TTY_DRIVER_REAL_RAW |
>>                                  TTY_DRIVER_DYNAMIC_DEV |
>>                                  TTY_DRIVER_HARDWARE_BREAK);
>>
>> @@ -199,28 +199,28 @@ int dgnc_tty_register(struct dgnc_board *brd)
>>        * The kernel wants space to store pointers to
>>        * tty_struct's and termios's.
>>        */
>> -     brd->SerialDriver.ttys = kcalloc(brd->maxports,
>> -                                      sizeof(*brd->SerialDriver.ttys),
>> +     brd->serial_driver.ttys = kcalloc(brd->maxports,
>> +                                      sizeof(*brd->serial_driver.ttys),
>>                                        GFP_KERNEL);
>> -     if (!brd->SerialDriver.ttys)
>> +     if (!brd->serial_driver.ttys)
>>               return -ENOMEM;
>>
>> -     kref_init(&brd->SerialDriver.kref);
>> -     brd->SerialDriver.termios = kcalloc(brd->maxports,
>> -                                         sizeof(*brd->SerialDriver.termios),
>> +     kref_init(&brd->serial_driver.kref);
>> +     brd->serial_driver.termios = kcalloc(brd->maxports,
>> +                                         sizeof(*brd->serial_driver.termios),
>>                                           GFP_KERNEL);
>> -     if (!brd->SerialDriver.termios)
>> +     if (!brd->serial_driver.termios)
>>               return -ENOMEM;
>>
>>       /*
>>        * Entry points for driver.  Called by the kernel from
>>        * tty_io.c and n_tty.c.
>>        */
>> -     tty_set_operations(&brd->SerialDriver, &dgnc_tty_ops);
>> +     tty_set_operations(&brd->serial_driver, &dgnc_tty_ops);
>>
>>       if (!brd->dgnc_Major_Serial_Registered) {
>>               /* Register tty devices */
>> -             rc = tty_register_driver(&brd->SerialDriver);
>> +             rc = tty_register_driver(&brd->serial_driver);
>>               if (rc < 0) {
>>                       dev_dbg(&brd->pdev->dev,
>>                               "Can't register tty device (%d)\n", rc);
>> @@ -234,19 +234,19 @@ int dgnc_tty_register(struct dgnc_board *brd)
>>        * again, separately so we don't get the LD confused about what major
>>        * we are when we get into the dgnc_tty_open() routine.
>>        */
>> -     brd->PrintDriver.magic = TTY_DRIVER_MAGIC;
>> +     brd->print_driver.magic = TTY_DRIVER_MAGIC;
>>       snprintf(brd->PrintName, MAXTTYNAMELEN, "pr_dgnc_%d_", brd->boardnum);
>>
>> -     brd->PrintDriver.name = brd->PrintName;
>> -     brd->PrintDriver.name_base = 0;
>> -     brd->PrintDriver.major = brd->SerialDriver.major;
>> -     brd->PrintDriver.minor_start = 0x80;
>> -     brd->PrintDriver.num = brd->maxports;
>> -     brd->PrintDriver.type = TTY_DRIVER_TYPE_SERIAL;
>> -     brd->PrintDriver.subtype = SERIAL_TYPE_NORMAL;
>> -     brd->PrintDriver.init_termios = DgncDefaultTermios;
>> -     brd->PrintDriver.driver_name = DRVSTR;
>> -     brd->PrintDriver.flags = (TTY_DRIVER_REAL_RAW |
>> +     brd->print_driver.name = brd->PrintName;
>> +     brd->print_driver.name_base = 0;
>> +     brd->print_driver.major = brd->serial_driver.major;
>> +     brd->print_driver.minor_start = 0x80;
>> +     brd->print_driver.num = brd->maxports;
>> +     brd->print_driver.type = TTY_DRIVER_TYPE_SERIAL;
>> +     brd->print_driver.subtype = SERIAL_TYPE_NORMAL;
>> +     brd->print_driver.init_termios = DgncDefaultTermios;
>> +     brd->print_driver.driver_name = DRVSTR;
>> +     brd->print_driver.flags = (TTY_DRIVER_REAL_RAW |
>>                                 TTY_DRIVER_DYNAMIC_DEV |
>>                                 TTY_DRIVER_HARDWARE_BREAK);
>>
>> @@ -255,27 +255,27 @@ int dgnc_tty_register(struct dgnc_board *brd)
>>        * tty_struct's and termios's.  Must be separated from
>>        * the Serial Driver so we don't get confused
>>        */
>> -     brd->PrintDriver.ttys = kcalloc(brd->maxports,
>> -                                     sizeof(*brd->PrintDriver.ttys),
>> +     brd->print_driver.ttys = kcalloc(brd->maxports,
>> +                                     sizeof(*brd->print_driver.ttys),
>>                                       GFP_KERNEL);
>> -     if (!brd->PrintDriver.ttys)
>> +     if (!brd->print_driver.ttys)
>>               return -ENOMEM;
>> -     kref_init(&brd->PrintDriver.kref);
>> -     brd->PrintDriver.termios = kcalloc(brd->maxports,
>> -                                        sizeof(*brd->PrintDriver.termios),
>> +     kref_init(&brd->print_driver.kref);
>> +     brd->print_driver.termios = kcalloc(brd->maxports,
>> +                                        sizeof(*brd->print_driver.termios),
>>                                          GFP_KERNEL);
>> -     if (!brd->PrintDriver.termios)
>> +     if (!brd->print_driver.termios)
>>               return -ENOMEM;
>>
>>       /*
>>        * Entry points for driver.  Called by the kernel from
>>        * tty_io.c and n_tty.c.
>>        */
>> -     tty_set_operations(&brd->PrintDriver, &dgnc_tty_ops);
>> +     tty_set_operations(&brd->print_driver, &dgnc_tty_ops);
>>
>>       if (!brd->dgnc_Major_TransparentPrint_Registered) {
>>               /* Register Transparent Print devices */
>> -             rc = tty_register_driver(&brd->PrintDriver);
>> +             rc = tty_register_driver(&brd->print_driver);
>>               if (rc < 0) {
>>                       dev_dbg(&brd->pdev->dev,
>>                               "Can't register Transparent Print device(%d)\n",
>> @@ -285,9 +285,9 @@ int dgnc_tty_register(struct dgnc_board *brd)
>>               brd->dgnc_Major_TransparentPrint_Registered = true;
>>       }
>>
>> -     dgnc_BoardsByMajor[brd->SerialDriver.major] = brd;
>> -     brd->dgnc_Serial_Major = brd->SerialDriver.major;
>> -     brd->dgnc_TransparentPrint_Major = brd->PrintDriver.major;
>> +     dgnc_BoardsByMajor[brd->serial_driver.major] = brd;
>> +     brd->dgnc_Serial_Major = brd->serial_driver.major;
>> +     brd->dgnc_TransparentPrint_Major = brd->print_driver.major;
>>
>>       return rc;
>>  }
>> @@ -364,12 +364,12 @@ int dgnc_tty_init(struct dgnc_board *brd)
>>               {
>>                       struct device *classp;
>>
>> -                     classp = tty_register_device(&brd->SerialDriver, i,
>> +                     classp = tty_register_device(&brd->serial_driver, i,
>>                                                    &ch->ch_bd->pdev->dev);
>>                       ch->ch_tun.un_sysfs = classp;
>>                       dgnc_create_tty_sysfs(&ch->ch_tun, classp);
>>
>> -                     classp = tty_register_device(&brd->PrintDriver, i,
>> +                     classp = tty_register_device(&brd->print_driver, i,
>>                                                    &ch->ch_bd->pdev->dev);
>>                       ch->ch_pun.un_sysfs = classp;
>>                       dgnc_create_tty_sysfs(&ch->ch_pun, classp);
>> @@ -408,39 +408,39 @@ void dgnc_tty_uninit(struct dgnc_board *brd)
>>       int i = 0;
>>
>>       if (brd->dgnc_Major_Serial_Registered) {
>> -             dgnc_BoardsByMajor[brd->SerialDriver.major] = NULL;
>> +             dgnc_BoardsByMajor[brd->serial_driver.major] = NULL;
>>               brd->dgnc_Serial_Major = 0;
>>               for (i = 0; i < brd->nasync; i++) {
>>                       if (brd->channels[i])
>>                               dgnc_remove_tty_sysfs(brd->channels[i]->
>>                                                     ch_tun.un_sysfs);
>> -                     tty_unregister_device(&brd->SerialDriver, i);
>> +                     tty_unregister_device(&brd->serial_driver, i);
>>               }
>> -             tty_unregister_driver(&brd->SerialDriver);
>> +             tty_unregister_driver(&brd->serial_driver);
>>               brd->dgnc_Major_Serial_Registered = false;
>>       }
>>
>>       if (brd->dgnc_Major_TransparentPrint_Registered) {
>> -             dgnc_BoardsByMajor[brd->PrintDriver.major] = NULL;
>> +             dgnc_BoardsByMajor[brd->print_driver.major] = NULL;
>>               brd->dgnc_TransparentPrint_Major = 0;
>>               for (i = 0; i < brd->nasync; i++) {
>>                       if (brd->channels[i])
>>                               dgnc_remove_tty_sysfs(brd->channels[i]->
>>                                                     ch_pun.un_sysfs);
>> -                     tty_unregister_device(&brd->PrintDriver, i);
>> +                     tty_unregister_device(&brd->print_driver, i);
>>               }
>> -             tty_unregister_driver(&brd->PrintDriver);
>> +             tty_unregister_driver(&brd->print_driver);
>>               brd->dgnc_Major_TransparentPrint_Registered = false;
>>       }
>>
>> -     kfree(brd->SerialDriver.ttys);
>> -     brd->SerialDriver.ttys = NULL;
>> -     kfree(brd->SerialDriver.termios);
>> -     brd->SerialDriver.termios = NULL;
>> -     kfree(brd->PrintDriver.ttys);
>> -     brd->PrintDriver.ttys = NULL;
>> -     kfree(brd->PrintDriver.termios);
>> -     brd->PrintDriver.termios = NULL;
>> +     kfree(brd->serial_driver.ttys);
>> +     brd->serial_driver.ttys = NULL;
>> +     kfree(brd->serial_driver.termios);
>> +     brd->serial_driver.termios = NULL;
>> +     kfree(brd->print_driver.ttys);
>> +     brd->print_driver.ttys = NULL;
>> +     kfree(brd->print_driver.termios);
>> +     brd->print_driver.termios = NULL;
>>  }
>>
>>  /*
--
To unsubscribe from this list: send the line "unsubscribe kernel-janitors" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Kernel Development]     [Kernel Announce]     [Kernel Newbies]     [Linux Networking Development]     [Share Photos]     [IDE]     [Security]     [Git]     [Netfilter]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Device Mapper]

  Powered by Linux