WDOG_NO_WAY_OUT (3) and WDOG_ACTIVE (0) are the bit numbers, not a mask. So "data->wddev.status |= WDOG_ACTIVE;" was intended to set bit zero but it is a no-op. Signed-off-by: Dan Carpenter <dan.carpenter@xxxxxxxxxx> diff --git a/drivers/hwmon/sch56xx-common.c b/drivers/hwmon/sch56xx-common.c index 839087c..4380f5d 100644 --- a/drivers/hwmon/sch56xx-common.c +++ b/drivers/hwmon/sch56xx-common.c @@ -464,9 +464,9 @@ struct sch56xx_watchdog_data *sch56xx_watchdog_register(struct device *parent, data->wddev.min_timeout = 1; data->wddev.max_timeout = 255 * 60; if (nowayout) - data->wddev.status |= WDOG_NO_WAY_OUT; + set_bit(WDOG_NO_WAY_OUT, &data->wddev.status); if (output_enable & SCH56XX_WDOG_OUTPUT_ENABLE) - data->wddev.status |= WDOG_ACTIVE; + set_bit(WDOG_ACTIVE, &data->wddev.status); /* Since the watchdog uses a downcounter there is no register to read the BIOS set timeout from (if any was set at all) -> -- To unsubscribe from this list: send the line "unsubscribe kernel-janitors" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
