[patch] drivers/leds/leds-lp5521.c: fix lp5521_read() error handling

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Gcc 4.6.2 complains that:
drivers/leds/leds-lp5521.c: In function ‘lp5521_load_program’:
drivers/leds/leds-lp5521.c:214:21: warning: ‘mode’ may be used uninitialized in this function [-Wuninitialized]
drivers/leds/leds-lp5521.c: In function ‘lp5521_probe’:
drivers/leds/leds-lp5521.c:788:5: warning: ‘buf’ may be used uninitialized in this function [-Wuninitialized]
drivers/leds/leds-lp5521.c:740:6: warning: ‘ret’ may be used uninitialized in this function [-Wuninitialized]

These are real problems if lp5521_read() returns an error.  When that
happens we should handle it, instead of ignoring it or doing a bitwise
OR with all the other error codes and continuing.

Signed-off-by: Dan Carpenter <dan.carpenter@xxxxxxxxxx>

diff --git a/drivers/leds/leds-lp5521.c b/drivers/leds/leds-lp5521.c
index de7b8fe..2381562 100644
--- a/drivers/leds/leds-lp5521.c
+++ b/drivers/leds/leds-lp5521.c
@@ -193,9 +193,14 @@ static int lp5521_load_program(struct lp5521_engine *eng, const u8 *pattern)
 
 	/* move current engine to direct mode and remember the state */
 	ret = lp5521_set_engine_mode(eng, LP5521_CMD_DIRECT);
+	if (ret)
+		return ret;
+
 	/* Mode change requires min 500 us delay. 1 - 2 ms  with margin */
 	usleep_range(1000, 2000);
-	ret |= lp5521_read(client, LP5521_REG_OP_MODE, &mode);
+	ret = lp5521_read(client, LP5521_REG_OP_MODE, &mode);
+	if (ret)
+		return ret;
 
 	/* For loading, all the engines to load mode */
 	lp5521_write(client, LP5521_REG_OP_MODE, LP5521_CMD_DIRECT);
@@ -211,8 +216,7 @@ static int lp5521_load_program(struct lp5521_engine *eng, const u8 *pattern)
 				LP5521_PROG_MEM_SIZE,
 				pattern);
 
-	ret |= lp5521_write(client, LP5521_REG_OP_MODE, mode);
-	return ret;
+	return lp5521_write(client, LP5521_REG_OP_MODE, mode);
 }
 
 static int lp5521_set_led_current(struct lp5521_chip *chip, int led, u8 curr)
@@ -784,8 +788,8 @@ static int __devinit lp5521_probe(struct i2c_client *client,
 	 * otherwise further access to the R G B channels in the
 	 * LP5521_REG_ENABLE register will not have any effect - strange!
 	 */
-	lp5521_read(client, LP5521_REG_R_CURRENT, &buf);
-	if (buf != LP5521_REG_R_CURR_DEFAULT) {
+	ret = lp5521_read(client, LP5521_REG_R_CURRENT, &buf);
+	if (ret || buf != LP5521_REG_R_CURR_DEFAULT) {
 		dev_err(&client->dev, "error in resetting chip\n");
 		goto fail2;
 	}
--
To unsubscribe from this list: send the line "unsubscribe kernel-janitors" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Kernel Development]     [Kernel Announce]     [Kernel Newbies]     [Linux Networking Development]     [Share Photos]     [IDE]     [Security]     [Git]     [Netfilter]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Device Mapper]

  Powered by Linux