On Wed, Dec 22, 2010 at 10:11:51PM +0100, Miklos Vajna <vmiklos@xxxxxxxxxxxxxx> wrote: > I reported the issue as I tested 2.6.36 and 2.6.37-rc6 and both failed. > Now I tried current -git and indeed I can't reproduce the issue there. > > I'm now bisecting between master and rc6 to see which commit fixes the > problem - just to make sure it's not something irrelevant and the bug is > still hidden somewhere. I spoke too early. After some trying, it seems I can reproduce with current -git as well. (But as Peter points out it's harder to reproduce.) Just in case it's interesting, I attached the -git dmesg. From a quick look the trace is the same as with v2.6.36, which is easy to reproduce.
Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.37-rc6-00186-ge5fcdb7 (vmiklos@helicon) (gcc version 4.5.2 (Frugalware Linux) ) #2 SMP PREEMPT Wed Dec 22 21:22:52 CET 2010 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f400 (usable) BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003fffd000 (usable) BIOS-e820: 000000003fffd000 - 0000000040000000 (reserved) BIOS-e820: 00000000fffbc000 - 0000000100000000 (reserved) debug: ignoring loglevel setting. Notice: NX (Execute Disable) protection missing in CPU or disabled in BIOS! DMI 2.4 present. DMI: /Bochs, BIOS Bochs 01/01/2007 e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) e820 remove range: 00000000000a0000 - 0000000000100000 (usable) last_pfn = 0x3fffd max_arch_pfn = 0x100000 found SMP MP-table at [c00fdc00] fdc00 Scanning 0 areas for low memory corruption initial memory mapped : 0 - 01c00000 init_memory_mapping: 0000000000000000-00000000377fe000 0000000000 - 0000400000 page 4k 0000400000 - 0037400000 page 2M 0037400000 - 00377fe000 page 4k kernel direct mapping tables up to 377fe000 @ 1bfb000-1c00000 ACPI: RSDP 000fdbb0 00014 (v00 BOCHS ) ACPI: RSDT 3fffde30 00034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001) ACPI: FACP 3ffffe70 00074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001) ACPI: DSDT 3fffdfd0 01E22 (v01 BXPC BXDSDT 00000001 INTL 20090123) ACPI: FACS 3ffffe00 00040 ACPI: SSDT 3fffdf90 00037 (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001) ACPI: APIC 3fffdeb0 00072 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001) ACPI: HPET 3fffde70 00038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001) ACPI: Local APIC address 0xfee00000 135MB HIGHMEM available. 887MB LOWMEM available. mapped low ram: 0 - 377fe000 low ram: 0 - 377fe000 kvm-clock: Using msrs 12 and 11 kvm-clock: cpu 0, msr 0:17be331, boot clock Zone PFN ranges: DMA 0x00000010 -> 0x00001000 Normal 0x00001000 -> 0x000377fe HighMem 0x000377fe -> 0x0003fffd Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000010 -> 0x0000009f 0: 0x00000100 -> 0x0003fffd On node 0 totalpages: 262028 free_area_init_node: node 0, pgdat c172ee20, node_mem_map f6ffd200 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3951 pages, LIFO batch:0 Normal zone: 1744 pages used for memmap Normal zone: 221486 pages, LIFO batch:31 HighMem zone: 272 pages used for memmap HighMem zone: 34543 pages, LIFO batch:7 Using APIC driver default ACPI: PM-Timer IO Port: 0xb008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ5 used by override. ACPI: IRQ9 used by override. ACPI: IRQ10 used by override. ACPI: IRQ11 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a201 base: 0xfed00000 SMP: Allowing 1 CPUs, 0 hotplug CPUs nr_irqs_gsi: 40 PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 Allocating PCI resources starting at 40000000 (gap: 40000000:bffbc000) Booting paravirtualized kernel on KVM setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1 PERCPU: Embedded 12 pages/cpu @f6800000 s27056 r0 d22096 u4194304 pcpu-alloc: s27056 r0 d22096 u4194304 alloc=1*4194304 pcpu-alloc: [0] 0 kvm-clock: cpu 0, msr 0:36806331, primary cpu clock Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259980 Kernel command line: root=/dev/sda1 debug sched_debug ignore_loglevel sysrq_always_enabled console=ttyS0 init=/bin/systemd PID hash table entries: 4096 (order: 2, 16384 bytes) Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Initializing CPU#0 allocated 5242500 bytes of page_cgroup please try 'cgroup_disable=memory' option if you don't want memory cgroups Initializing HighMem for node 0 (000377fe:0003fffd) Memory: 1025412k/1048564k available (5451k kernel code, 22700k reserved, 1972k data, 504k init, 139260k highmem) virtual kernel memory layout: fixmap : 0xfff17000 - 0xfffff000 ( 928 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) .init : 0xc1741000 - 0xc17bf000 ( 504 kB) .data : 0xc1552f3d - 0xc174022c (1972 kB) .text : 0xc1000000 - 0xc1552f3d (5451 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. SLUB: Genslabs=15, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 Preemptable hierarchical RCU implementation. RCU-based detection of stalled CPUs is disabled. Verbose stalled-CPUs detection is disabled. NR_IRQS:2304 nr_irqs:256 16 CPU 0 irqstacks, hard=f6408000 soft=f640a000 Console: colour VGA+ 80x25 console [ttyS0] enabled hpet clockevent registered Detected 2665.754 MHz processor. Calibrating delay loop (skipped) preset value.. 5331.50 BogoMIPS (lpj=2665754) pid_max: default: 32768 minimum: 301 Security Framework initialized AppArmor: AppArmor disabled by boot time parameter Mount-cache hash table entries: 512 Initializing cgroup subsys ns ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup. Initializing cgroup subsys cpuacct Initializing cgroup subsys memory Initializing cgroup subsys devices Initializing cgroup subsys freezer Performance Events: Broken PMU hardware detected, software events only. SMP alternatives: switching to UP code Freeing SMP alternatives: 24k freed ACPI: Core revision 20101013 Enabling APIC mode: Flat. Using 1 I/O APICs ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel QEMU Virtual CPU version 0.13.0 stepping 03 Brought up 1 CPUs Total of 1 processors activated (5331.50 BogoMIPS). devtmpfs: initialized xor: automatically using best checksumming function: pIII_sse pIII_sse : 7960.000 MB/sec xor: using function: pIII_sse (7960.000 MB/sec) regulator: core version 0.5 regulator: dummy: NET: Registered protocol family 16 EISA bus registered ACPI: bus type pci registered PCI: Using configuration type 1 for base access bio: create slab <bio-0> at 0 raid6: int32x1 968 MB/s raid6: int32x2 929 MB/s raid6: int32x4 785 MB/s raid6: int32x8 664 MB/s raid6: mmxx1 3222 MB/s raid6: mmxx2 3613 MB/s raid6: sse1x1 2218 MB/s raid6: sse1x2 2804 MB/s raid6: sse2x1 4093 MB/s raid6: sse2x2 4855 MB/s raid6: using algorithm sse2x2 (4855 MB/s) ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: No dock devices found. PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored) pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) pci_root PNP0A03:00: host bridge window [mem 0xe0000000-0xfebfffff] (ignored) pci 0000:00:00.0: [8086:1237] type 0 class 0x000600 pci 0000:00:01.0: [8086:7000] type 0 class 0x000601 pci 0000:00:01.1: [8086:7010] type 0 class 0x000101 pci 0000:00:01.1: reg 20: [io 0xc000-0xc00f] pci 0000:00:01.3: [8086:7113] type 0 class 0x000680 pci 0000:00:01.3: quirk: [io 0xb000-0xb03f] claimed by PIIX4 ACPI pci 0000:00:01.3: quirk: [io 0xb100-0xb10f] claimed by PIIX4 SMB pci 0000:00:02.0: [1013:00b8] type 0 class 0x000300 pci 0000:00:02.0: reg 10: [mem 0xf0000000-0xf1ffffff pref] pci 0000:00:02.0: reg 14: [mem 0xf2000000-0xf2000fff] pci 0000:00:02.0: reg 30: [mem 0xf2010000-0xf201ffff pref] pci 0000:00:03.0: [8086:100e] type 0 class 0x000200 pci 0000:00:03.0: reg 10: [mem 0xf2020000-0xf203ffff] pci 0000:00:03.0: reg 14: [io 0xc040-0xc07f] pci 0000:00:03.0: reg 30: [mem 0xf2040000-0xf205ffff pref] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11) ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11) ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11) ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11) vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 32 bytes reserve RAM buffer: 000000000009f400 - 000000000009ffff reserve RAM buffer: 000000003fffd000 - 000000003fffffff NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default HPET: 3 timers in total, 0 timers will be used for per-cpu timer hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 comparators, 64-bit 100.000000 MHz counter Switching to clocksource kvm-clock pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:00: [bus 00-ff] pnp 00:00: [io 0x0cf8-0x0cff] pnp 00:00: [io 0x0000-0x0cf7 window] pnp 00:00: [io 0x0d00-0xffff window] pnp 00:00: [mem 0x000a0000-0x000bffff window] pnp 00:00: [mem 0xe0000000-0xfebfffff window] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) pnp 00:01: [io 0x0070-0x0071] pnp 00:01: [irq 8] pnp 00:01: [io 0x0072-0x0077] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) pnp 00:02: [io 0x0060] pnp 00:02: [io 0x0064] pnp 00:02: [irq 1] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active) pnp 00:03: [irq 12] pnp 00:03: Plug and Play ACPI device, IDs PNP0f13 (active) pnp 00:04: [io 0x03f2-0x03f5] pnp 00:04: [io 0x03f7] pnp 00:04: [irq 6] pnp 00:04: [dma 2] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active) pnp 00:05: [io 0x0378-0x037f] pnp 00:05: [irq 7] pnp 00:05: Plug and Play ACPI device, IDs PNP0400 (active) pnp 00:06: [io 0x03f8-0x03ff] pnp 00:06: [irq 4] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active) pnp 00:07: [mem 0xfed00000-0xfed003ff] pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active) pnp: PnP ACPI: found 8 devices ACPI: ACPI bus type pnp unregistered PnPBIOS: Disabled pci_bus 0000:00: resource 0 [io 0x0000-0xffff] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered UDP hash table entries: 512 (order: 2, 16384 bytes) UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) NET: Registered protocol family 1 pci 0000:00:00.0: Limiting direct PCI/PCI transfers pci 0000:00:01.0: PIIX3: Enabling Passive Release pci 0000:00:01.0: Activating ISA DMA hang workarounds pci 0000:00:02.0: Boot video device PCI: CLS 0 bytes, default 32 Scanning for low memory corruption every 60 seconds audit: initializing netlink socket (disabled) type=2000 audit(1293058318.479:1): initialized highmem bounce pool size: 64 pages VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled SGI XFS Quota Management subsystem msgmni has been set to 1730 async_tx: api initialized (async) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) pci_hotplug: PCI Hot Plug PCI Core version: 0.5 isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled Clocksource tsc unstable (delta = -74324425 ns) ˙serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A FDC 0 is a S82078B brd: module loaded Compaq SMART2 Driver (v 2.6.0) HP CISS Driver (v 3.6.26) Uniform Multi-Platform E-IDE driver ide-gd driver 1.18 ide-cd driver 5.00 stex: Promise SuperTrak EX Driver version: 4.6.0000.4 ata_piix 0000:00:01.1: version 2.13 ata_piix 0000:00:01.1: setting latency timer to 64 scsi0 : ata_piix scsi1 : ata_piix ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc000 irq 14 ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc008 irq 15 Fusion MPT base driver 3.04.17 Copyright (c) 1999-2008 LSI Corporation Fusion MPT SPI Host driver 3.04.17 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver uhci_hcd: USB Universal Host Controller Interface driver Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usbcore: registered new interface driver ums-alauda usbcore: registered new interface driver ums-cypress usbcore: registered new interface driver ums-datafab usbcore: registered new interface driver ums-freecom usbcore: registered new interface driver ums-isd200 usbcore: registered new interface driver ums-jumpshot usbcore: registered new interface driver ums-karma usbcore: registered new interface driver ums-onetouch usbcore: registered new interface driver ums-sddr09 usbcore: registered new interface driver ums-sddr55 usbcore: registered new interface driver ums-usbat PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice md: linear personality registered for level -1 md: raid0 personality registered for level 0 md: raid1 personality registered for level 1 md: raid10 personality registered for level 10 md: raid6 personality registered for level 6 md: raid5 personality registered for level 5 md: raid4 personality registered for level 4 input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 EISA: Probing bus 0 at eisa.0 EISA: Detected 0 cards. cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver usbhid usbhid: USB HID core driver TCP bic registered Initializing XFRM netlink socket NET: Registered protocol family 17 Registering the dns_resolver key type Using IPI No-Shortcut mode registered taskstats version 1 drivers/rtc/hctosys.c: unable to open rtc device (rtc0) ata2.01: NODEV after polling detection ata1.01: NODEV after polling detection ata1.00: ATA-7: QEMU HARDDISK, 0.13.0, max UDMA/100 ata1.00: 16777216 sectors, multi 16: LBA48 ata2.00: ATAPI: QEMU DVD-ROM, 0.13.0, max UDMA/100 ata2.00: configured for MWDMA2 ata1.00: configured for MWDMA2 scsi 0:0:0:0: Direct-Access ATA QEMU HARDDISK 0.13 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 16777216 512-byte logical blocks: (8.58 GB/8.00 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 scsi 1:0:0:0: CD-ROM QEMU QEMU DVD-ROM 0.13 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] Attached SCSI disk sr0: scsi3-mmc drive: 4x/4x xa/form2 tray cdrom: Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 md: Waiting for all devices to be available before autodetect md: If you don't use raid, use raid=noautodetect md: Autodetecting RAID arrays. md: Scanned 0 and added 0 devices. md: autorun ... md: ... autorun DONE. EXT3-fs (sda1): error: couldn't mount because of unsupported optional features (240) EXT2-fs (sda1): error: couldn't mount because of unsupported optional features (244) EXT4-fs (sda1): INFO: recovery required on readonly filesystem EXT4-fs (sda1): write access will be enabled during recovery EXT4-fs (sda1): recovery complete EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) VFS: Mounted root (ext4 filesystem) readonly on device 8:1. devtmpfs: mounted Freeing unused kernel memory: 504k freed systemd[1]: systemd 15 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX +SYSVINIT -LIBCRYPTSETUP; frugalware) Welcome to [1;36mFrugalware 1.4pre2 (Nexon)[0m! systemd[1]: /sbin/modprobe failed with error code 1. systemd[1]: Set hostname to <frugalware>. systemd[1]: /etc/mtab is not a symlink or not pointing to /proc/self/mounts. This is not supported anymore. Please make sure to replace this file by a symlink to avoid incorrect or misleading mount(8) output. Starting LSB: Clean /tmp, /var/run and /var/lock.... Starting Apply Kernel Variables... Starting Load Kernel Modules... systemd[1]: Failed to open /dev/autofs: No such file or directory systemd[1]: Failed to initialize automounter: No such file or directory systemd[1]: Unit sys-kernel-debug.automount entered failed state. systemd[1]: Failed to open /dev/autofs: No such file or directory systemd[1]: Failed to initialize automounter: No such file or directory systemd[1]: Unit proc-sys-fs-binfmt_misc.automount entered failed state. systemd[1]: Failed to open /dev/autofs: No such file or directory systemd[1]: Failed to initialize automounter: No such file or directory systemd[1]: Unit sys-kernel-security.automount entered failed state. systemd[1]: Failed to open /dev/autofs: No such file or directory systemd[1]: Failed to initialize automounter: No such file or directory systemd[1]: Unit dev-mqueue.automount entered failed state. Starting Setup Virtual Console... Starting Apply System Clock UTC Offset... Starting Remount API VFS... Starting File System Check on Root Device... Starting Logging Daemon... Starting systemd Syslog Kernel Log Buffer Bridge... systemd[1]: systemd-modules-load.service: main process exited, code=exited, status=1 Starting Load Kernel Modules [1;31mfailed[0m. systemd[1]: Unit systemd-modules-load.service entered failed state. modprobe[1229]: FATAL: Could not load /lib/modules/2.6.37-rc6-00186-ge5fcdb7/modules.dep: No such file or directoryStarting udev Kernel Device Manager... systemd-fsck[1235]: /dev/sda1: Superblock last mount time is in the future. systemd-fsck[1235]: (by less than a day, probably due to the hardware clock being incorrectly set) FIXED. systemd-fsck[1235]: /dev/sda1: clean, 45976/524288 files, 265431/2096474 blocks (check in 3 mounts) udev[1244]: starting version 165 Starting Remount Root FS... EXT4-fs (sda1): re-mounted. Opts: (null) Starting Load Random Seed... Starting Recreate Volatile Files and Directories... BUG: unable to handle kernel NULL pointer dereference at 00000001 IP: [<c129e938>] __rb_rotate_right+0x18/0x70 *pde = 00000000 Oops: 0000 [#1] PREEMPT SMP last sysfs file: /sys/bus/pnp/drivers/i8042 kbd/uevent Modules linked in: Pid: 1380, comm: systemd-cgroups Not tainted 2.6.37-rc6-00186-ge5fcdb7 #2 /Bochs EIP: 0060:[<c129e938>] EFLAGS: 00010002 CPU: 0 EIP is at __rb_rotate_right+0x18/0x70 EAX: f5ca2e48 EBX: f5ca2e4c ECX: f5ca2e48 EDX: f5ca27fc ESI: 00000001 EDI: 00000001 EBP: f6806360 ESP: f5d6fe88 DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 Process systemd-cgroups (pid: 1380, ti=f5d6e000 task=f67c4000 task.ti=f5d6e000) Stack: f5ca27fc 00000001 f5ca2e48 c129ed02 00000001 f5ca27e0 f5ca2a20 f5ca2a28 f6806360 c1032438 f67c41bc f6806360 00000000 f67c4000 c154f5ff f5d6ff24 c155a7e0 00000564 c110480a f5d6ff17 c17be360 c17be360 f67c41c0 c17be360 Call Trace: [<c129ed02>] ? rb_erase+0x262/0x2b0 [<c1032438>] ? pick_next_task_fair+0x88/0x120 [<c154f5ff>] ? schedule+0x49f/0x960 [<c110480a>] ? d_lookup+0x2a/0x40 [<c10e6e96>] ? __slab_free+0xd6/0x180 [<c103ea89>] ? release_task+0x2b9/0x420 [<c1040410>] ? do_exit+0x520/0x790 [<c104088e>] ? do_group_exit+0x2e/0x90 [<c1040901>] ? sys_exit_group+0x11/0x20 [<c100361c>] ? sysenter_do_call+0x12/0x28 Code: 5f c3 90 89 4b 08 8b 10 83 e2 03 09 ca 89 10 5b 5e 5f c3 57 56 53 8b 48 08 8b 18 83 e3 fc 8b 71 04 89 70 08 85 f6 74 0c 8b 79 04 <8b> 37 83 e6 03 09 c6 89 37 89 41 04 8b 31 83 e6 03 09 de 89 31 EIP: [<c129e938>] __rb_rotate_right+0x18/0x70 SS:ESP 0068:f5d6fe88 CR2: 0000000000000001 ---[ end trace 0f6a879251f67ee0 ]--- Fixing recursive fault but reboot is needed!
Attachment:
pgpISESzj_VGZ.pgp
Description: PGP signature