Re: [RFC PATCH v4 12/17] powerpc64/ftrace: Move ftrace sequence out of line

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sun, Jul 14, 2024 at 5:29 PM Naveen N Rao <naveen@xxxxxxxxxx> wrote:
>
> Function profile sequence on powerpc includes two instructions at the
> beginning of each function:
>         mflr    r0
>         bl      ftrace_caller
>
> The call to ftrace_caller() gets nop'ed out during kernel boot and is
> patched in when ftrace is enabled.
>
> Given the sequence, we cannot return from ftrace_caller with 'blr' as we
> need to keep LR and r0 intact. This results in link stack (return
> address predictor) imbalance when ftrace is enabled. To address that, we
> would like to use a three instruction sequence:
>         mflr    r0
>         bl      ftrace_caller
>         mtlr    r0
>
> Further more, to support DYNAMIC_FTRACE_WITH_CALL_OPS, we need to
> reserve two instruction slots before the function. This results in a
> total of five instruction slots to be reserved for ftrace use on each
> function that is traced.
>
> Move the function profile sequence out-of-line to minimize its impact.
> To do this, we reserve a single nop at function entry using
> -fpatchable-function-entry=1 and add a pass on vmlinux.o to determine
> the total number of functions that can be traced. This is then used to
> generate a .S file reserving the appropriate amount of space for use as
> ftrace stubs, which is built and linked into vmlinux.
>
> On bootup, the stub space is split into separate stubs per function and
> populated with the proper instruction sequence. A pointer to the
> associated stub is maintained in dyn_arch_ftrace.
>
> For modules, space for ftrace stubs is reserved from the generic module
> stub space.
>
> This is restricted to and enabled by default only on 64-bit powerpc,
> though there are some changes to accommodate 32-bit powerpc. This is
> done so that 32-bit powerpc could choose to opt into this based on
> further tests and benchmarks.
>
> As an example, after this patch, kernel functions will have a single nop
> at function entry:
> <kernel_clone>:
>         addis   r2,r12,467
>         addi    r2,r2,-16028
>         nop
>         mfocrf  r11,8
>         ...
>
> When ftrace is enabled, the nop is converted to an unconditional branch
> to the stub associated with that function:
> <kernel_clone>:
>         addis   r2,r12,467
>         addi    r2,r2,-16028
>         b       ftrace_ool_stub_text_end+0x11b28
>         mfocrf  r11,8
>         ...
>
> The associated stub:
> <ftrace_ool_stub_text_end+0x11b28>:
>         mflr    r0
>         bl      ftrace_caller
>         mtlr    r0
>         b       kernel_clone+0xc
>         ...
>
> Signed-off-by: Naveen N Rao <naveen@xxxxxxxxxx>



> diff --git a/arch/powerpc/tools/Makefile b/arch/powerpc/tools/Makefile
> new file mode 100644
> index 000000000000..31dd3151c272
> --- /dev/null
> +++ b/arch/powerpc/tools/Makefile
> @@ -0,0 +1,10 @@
> +# SPDX-License-Identifier: GPL-2.0-or-later
> +
> +quiet_cmd_gen_ftrace_ool_stubs = FTRACE  $@


This is not "FTRACE".

"GEN" or something like that.



> +      cmd_gen_ftrace_ool_stubs = $< $(objtree)/vmlinux.o $@
> +
> +targets += .arch.vmlinux.o
> +.arch.vmlinux.o: $(srctree)/arch/powerpc/tools/ftrace-gen-ool-stubs.sh $(objtree)/vmlinux.o FORCE
> +       $(call if_changed,gen_ftrace_ool_stubs)
> +
> +clean-files += $(objtree)/.arch.vmlinux.S $(objtree)/.arch.vmlinux.o



This is wrong. $(objtree) is always '.'

It will attempt to clean up:

arch/powerpc/tools/.arch.vmlinux.S
arch/powerpc/tools/.arch.vmlinux.o



You must not create the intermediate file,
.arch.vmlinux.S at the top directory because
this build step is pretty much PowerPC-specific.


Rather, I'd recommend to create *.S and *.o in
arch/powerpc/tools/:

arch/powerpc/tools/vmlinux.S
arch/powerpc/tools/vmlinux.o




When you submit the next version, please run 'make clean'
and confirm that any powerpc-specific build artifacts
not being left-over.






> diff --git a/arch/powerpc/tools/ftrace-gen-ool-stubs.sh b/arch/powerpc/tools/ftrace-gen-ool-stubs.sh
> new file mode 100755
> index 000000000000..0b85cd5262ff
> --- /dev/null
> +++ b/arch/powerpc/tools/ftrace-gen-ool-stubs.sh
> @@ -0,0 +1,48 @@
> +#!/bin/sh
> +# SPDX-License-Identifier: GPL-2.0-or-later
> +
> +# Error out on error
> +set -e
> +
> +is_enabled() {
> +       grep -q "^$1=y" include/config/auto.conf
> +}
> +
> +vmlinux_o=${1}
> +arch_vmlinux_o=${2}
> +arch_vmlinux_S=$(dirname ${arch_vmlinux_o})/$(basename ${arch_vmlinux_o} .o).S
> +
> +RELOCATION=R_PPC64_ADDR64
> +if is_enabled CONFIG_PPC32; then
> +       RELOCATION=R_PPC_ADDR32
> +fi
> +
> +num_ool_stubs_text=$(${CROSS_COMPILE}objdump -r -j __patchable_function_entries ${vmlinux_o} |
> +                    grep -v ".init.text" | grep "${RELOCATION}" | wc -l)
> +num_ool_stubs_inittext=$(${CROSS_COMPILE}objdump -r -j __patchable_function_entries ${vmlinux_o} |
> +                        grep ".init.text" | grep "${RELOCATION}" | wc -l)
> +
> +cat > ${arch_vmlinux_S} <<EOF
> +#include <asm/asm-offsets.h>
> +#include <linux/linkage.h>
> +
> +.pushsection .tramp.ftrace.text,"aw"
> +SYM_DATA(ftrace_ool_stub_text_end_count, .long ${num_ool_stubs_text})
> +
> +SYM_CODE_START(ftrace_ool_stub_text_end)
> +       .space ${num_ool_stubs_text} * FTRACE_OOL_STUB_SIZE
> +SYM_CODE_END(ftrace_ool_stub_text_end)
> +.popsection
> +
> +.pushsection .tramp.ftrace.init,"aw"
> +SYM_DATA(ftrace_ool_stub_inittext_count, .long ${num_ool_stubs_inittext})
> +
> +SYM_CODE_START(ftrace_ool_stub_inittext)
> +       .space ${num_ool_stubs_inittext} * FTRACE_OOL_STUB_SIZE
> +SYM_CODE_END(ftrace_ool_stub_inittext)
> +.popsection
> +EOF
> +
> +${CC} ${NOSTDINC_FLAGS} ${LINUXINCLUDE} ${KBUILD_CPPFLAGS} \
> +      ${KBUILD_AFLAGS} ${KBUILD_AFLAGS_KERNEL} \
> +      -c -o ${arch_vmlinux_o} ${arch_vmlinux_S}


Please do not compile this within a shell script.

scripts/Makefile.build provides rule_as_o_S to do this.




[1] vmlinux.o --> arch/powerpc/tools/vmlinux.S

[2] arch/powerpc/tools/vmlinux.S --> arch/powerpc/tools/vmlinux.o


Please split these in separate build rules.





> --
> 2.45.2
>


--
Best Regards
Masahiro Yamada





[Index of Archives]     [Linux&nblp;USB Development]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite Secrets]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux