Make link-vmlinux.sh print the commands it wants to run instead of
actually running them when $dry_run is defined.
This is needed in order for make -n/--dry-run to output a complete
build script.
Signed-off-by: Vegard Nossum <vegard.nossum@xxxxxxxxxx>
---
scripts/Makefile.vmlinux | 15 ++++++++++++--
scripts/link-vmlinux.sh | 44 ++++++++++++++++++++++++++--------------
2 files changed, 42 insertions(+), 17 deletions(-)
diff --git a/scripts/Makefile.vmlinux b/scripts/Makefile.vmlinux
index 10d80e07f945c..1fe0faab52889 100644
--- a/scripts/Makefile.vmlinux
+++ b/scripts/Makefile.vmlinux
@@ -1,5 +1,12 @@
# SPDX-License-Identifier: GPL-2.0-only
+# there doesn't seem to be a straightforward way for 'make -n' to output
+# one command while actually executing another, so we resort to this hack
+# where we set an environment variable differently depending on whether
+# we are executing from 'make' or executing from the 'make -n' log.
+LINK_VMLINUX=scripts/link-vmlinux.sh
+export LINK_VMLINUX
+
PHONY := __default
__default: vmlinux
@@ -29,7 +36,8 @@ ARCH_POSTLINK := $(wildcard $(srctree)/arch/$(SRCARCH)/Makefile.postlink)
# Final link of vmlinux with optional arch pass after final link
cmd_link_vmlinux = \
- $< "$(LD)" "$(KBUILD_LDFLAGS)" "$(LDFLAGS_vmlinux)"; \
+ "$${LINK_VMLINUX}" \
+ "$(LD)" "$(KBUILD_LDFLAGS)" "$(LDFLAGS_vmlinux)"; \
$(if $(ARCH_POSTLINK), $(MAKE) -f $(ARCH_POSTLINK) $@, true)
# We don't know how to build these
@@ -37,7 +45,10 @@ PHONY += vmlinux.o
PHONY += $(KBUILD_LDS)
targets += vmlinux
-vmlinux: scripts/link-vmlinux.sh vmlinux.o $(KBUILD_LDS) FORCE
+vmlinux: $(LINK_VMLINUX) vmlinux.o $(KBUILD_LDS) FORCE
+ifdef dry_run
+ @LINK_VMLINUX=/bin/true
+endif
+$(call if_changed_dep,link_vmlinux)
# Add FORCE to the prequisites of a target to force it to be always rebuilt.
diff --git a/scripts/link-vmlinux.sh b/scripts/link-vmlinux.sh
index f7b2503cdba95..fd32e48a8a455 100755
--- a/scripts/link-vmlinux.sh
+++ b/scripts/link-vmlinux.sh
@@ -32,6 +32,17 @@ LD="$1"
KBUILD_LDFLAGS="$2"
LDFLAGS_vmlinux="$3"
+# If $dry_run is set, just echo the command instead of executing it.
+run()
+{
+ if [ ! -v dry_run ]
+ then
+ eval "$1"
+ else
+ echo "$1"
+ fi
+}
+
is_enabled() {
grep -q "^$1=y" include/config/auto.conf
}
@@ -40,7 +51,10 @@ is_enabled() {
# Will be supressed by "make -s"
info()
{
- printf " %-7s %s\n" "${1}" "${2}"
+ if [ ! -v dry_run ]
+ then
+ printf " %-7s %s\n" "${1}" "${2}"
+ fi
}
# Link of vmlinux
@@ -97,10 +111,10 @@ vmlinux_link()
ldflags="${ldflags} ${wl}-Map=${output}.map"
fi
- ${ld} ${ldflags} -o ${output} \
+ run "${ld} ${ldflags} -o ${output} \
${wl}--whole-archive ${objs} ${wl}--no-whole-archive \
${wl}--start-group ${libs} ${wl}--end-group \
- ${kallsymso} ${btf_vmlinux_bin_o} ${ldlibs}
+ ${kallsymso} ${btf_vmlinux_bin_o} ${ldlibs}"
}
# generate .BTF typeinfo from DWARF debuginfo
@@ -129,8 +143,8 @@ gen_btf()
# deletes all symbols including __start_BTF and __stop_BTF, which will
# be redefined in the linker script. Add 2>/dev/null to suppress GNU
# objcopy warnings: "empty loadable segment detected at ..."
- ${OBJCOPY} --only-section=.BTF --set-section-flags .BTF=alloc,readonly \
- --strip-all ${1} "${btf_data}" 2>/dev/null
+ run "${OBJCOPY} --only-section=.BTF --set-section-flags .BTF=alloc,readonly \
+ --strip-all ${1} "${btf_data}" 2>/dev/null"
# Change e_type to ET_REL so that it can be used to link final vmlinux.
# GNU ld 2.35+ and lld do not allow an ET_EXEC input.
if is_enabled CONFIG_CPU_BIG_ENDIAN; then
@@ -161,11 +175,11 @@ kallsyms()
fi
info KSYMS "${2}.S"
- scripts/kallsyms ${kallsymopt} "${1}" > "${2}.S"
+ run "scripts/kallsyms ${kallsymopt} \"${1}\" > \"${2}.S\""
info AS "${2}.o"
- ${CC} ${NOSTDINC_FLAGS} ${LINUXINCLUDE} ${KBUILD_CPPFLAGS} \
- ${KBUILD_AFLAGS} ${KBUILD_AFLAGS_KERNEL} -c -o "${2}.o" "${2}.S"
+ run "${CC} ${NOSTDINC_FLAGS} ${LINUXINCLUDE} ${KBUILD_CPPFLAGS} \
+ ${KBUILD_AFLAGS} ${KBUILD_AFLAGS_KERNEL} -c -o \"${2}.o\" \"${2}.S\""
kallsymso=${2}.o
}
@@ -184,12 +198,12 @@ sysmap_and_kallsyms()
mksysmap()
{
info NM ${2}
- ${NM} -n "${1}" | sed -f "${srctree}/scripts/mksysmap" > "${2}"
+ run "${NM} -n \"${1}\" | sed -f \"${srctree}/scripts/mksysmap\" > \"${2}\""
}
sorttable()
{
- ${objtree}/scripts/sorttable ${1}
+ run "${objtree}/scripts/sorttable ${1}"
}
cleanup()
@@ -270,13 +284,13 @@ if is_enabled CONFIG_KALLSYMS; then
strip_debug=1
sysmap_and_kallsyms .tmp_vmlinux1
- size1=$(${CONFIG_SHELL} "${srctree}/scripts/file-size.sh" ${kallsymso})
+ [ -v dry_run ] || size1=$(${CONFIG_SHELL} "${srctree}/scripts/file-size.sh" ${kallsymso})
vmlinux_link .tmp_vmlinux2
sysmap_and_kallsyms .tmp_vmlinux2
- size2=$(${CONFIG_SHELL} "${srctree}/scripts/file-size.sh" ${kallsymso})
+ [ -v dry_run ] || size2=$(${CONFIG_SHELL} "${srctree}/scripts/file-size.sh" ${kallsymso})
- if [ $size1 -ne $size2 ] || [ -n "${KALLSYMS_EXTRA_PASS}" ]; then
+ if [ ! -v dry_run ] || [ $size1 -ne $size2 ] || [ -n "${KALLSYMS_EXTRA_PASS}" ]; then
vmlinux_link .tmp_vmlinux3
sysmap_and_kallsyms .tmp_vmlinux3
fi
@@ -289,7 +303,7 @@ vmlinux_link vmlinux
# fill in BTF IDs
if is_enabled CONFIG_DEBUG_INFO_BTF && is_enabled CONFIG_BPF; then
info BTFIDS vmlinux
- ${RESOLVE_BTFIDS} vmlinux
+ run ${RESOLVE_BTFIDS} vmlinux
fi
mksysmap vmlinux System.map
@@ -303,7 +317,7 @@ if is_enabled CONFIG_BUILDTIME_TABLE_SORT; then
fi
# step a (see comment above)
-if is_enabled CONFIG_KALLSYMS; then
+if [ ! -v dry_run ] && is_enabled CONFIG_KALLSYMS; then
if ! cmp -s System.map "${kallsyms_sysmap}"; then
echo >&2 Inconsistent kallsyms data
echo >&2 'Try "make KALLSYMS_EXTRA_PASS=1" as a workaround'
--
2.34.1
