On Fri, Jul 26, 2024 at 04:23:14AM +0900, Masahiro Yamada wrote:
> When resolving a merge conflict, Linus noticed the fdtoverlay command
> duplication introduced by commit 49636c5680b9 ("kbuild: verify dtoverlay
> files against schema"). He suggested a clean-up.
>
> I eliminated the duplication and refactored the code a little further.
>
> No functional changes are intended, except for the short logs.
>
> The log will look as follows:
>
> $ make ARCH=arm64 defconfig dtbs_check
> [ snip ]
> DTC [C] arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxca.dtb
> DTC [C] arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dtb
> DTC [C] arch/arm64/boot/dts/freescale/imx93-var-som-symphony.dtb
> DTC [C] arch/arm64/boot/dts/freescale/imx95-19x19-evk.dtb
> DTC arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-imx219.dtbo
> OVL [C] arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-imx219.dtb
>
> The tag [C] indicates that the schema check is executed.
>
> Link: https://lore.kernel.org/lkml/CAHk-=wiF3yeWehcvqY-4X7WNb8n4yw_5t0H1CpEpKi7JMjaMfw@xxxxxxxxxxxxxx/#t
> Requested-by: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
> Signed-off-by: Masahiro Yamada <masahiroy@xxxxxxxxxx>
> ---
>
> scripts/Makefile.lib | 28 ++++++++++------------------
> 1 file changed, 10 insertions(+), 18 deletions(-)
>
> diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib
> index fe3668dc4954..207325eaf1d1 100644
> --- a/scripts/Makefile.lib
> +++ b/scripts/Makefile.lib
> @@ -400,26 +400,23 @@ $(obj)/%.dtb.S: $(obj)/%.dtb FORCE
> $(obj)/%.dtbo.S: $(obj)/%.dtbo FORCE
> $(call if_changed,wrap_S_dtb)
>
> -quiet_cmd_dtc = DTC $@
> +quiet_dtb_check_tag = $(if $(dtb-check-enabled),[C], )
> +cmd_dtb_check = $(if $(dtb-check-enabled),; $(DT_CHECKER) $(DT_CHECKER_FLAGS) -u $(srctree)/$(DT_BINDING_DIR) -p $(DT_TMP_SCHEMA) $@ || true)
> +
> +quiet_cmd_dtc = DTC $(quiet_dtb_check_tag) $@
> cmd_dtc = $(HOSTCC) -E $(dtc_cpp_flags) -x assembler-with-cpp -o $(dtc-tmp) $< ; \
> $(DTC) -o $@ -b 0 \
> $(addprefix -i,$(dir $<) $(DTC_INCLUDE)) $(DTC_FLAGS) \
> -d $(depfile).dtc.tmp $(dtc-tmp) ; \
> - cat $(depfile).pre.tmp $(depfile).dtc.tmp > $(depfile)
> -
> -DT_CHECK_CMD = $(DT_CHECKER) $(DT_CHECKER_FLAGS) -u $(srctree)/$(DT_BINDING_DIR) -p $(DT_TMP_SCHEMA)
> + cat $(depfile).pre.tmp $(depfile).dtc.tmp > $(depfile) \
> + $(cmd_dtb_check)
>
> # NOTE:
> # Do not replace $(filter %.dtb %.dtbo, $^) with $(real-prereqs). When a single
> # DTB is turned into a multi-blob DTB, $^ will contain header file dependencies
> # recorded in the .*.cmd file.
> -ifneq ($(CHECK_DTBS),)
> -quiet_cmd_fdtoverlay = DTOVLCH $@
> - cmd_fdtoverlay = $(objtree)/scripts/dtc/fdtoverlay -o $@ -i $(filter %.dtb %.dtbo, $^) ; $(DT_CHECK_CMD) $@ || true
> -else
> -quiet_cmd_fdtoverlay = DTOVL $@
> - cmd_fdtoverlay = $(objtree)/scripts/dtc/fdtoverlay -o $@ -i $(filter %.dtb %.dtbo, $^)
> -endif
> +quiet_cmd_fdtoverlay = OVL $(quiet_dtb_check_tag) $@
> + cmd_fdtoverlay = $(objtree)/scripts/dtc/fdtoverlay -o $@ -i $(filter %.dtb %.dtbo, $^) $(cmd_dtb_check)
>
> $(multi-dtb-y): FORCE
> $(call if_changed,fdtoverlay)
> @@ -430,16 +427,11 @@ DT_CHECKER ?= dt-validate
> DT_CHECKER_FLAGS ?= $(if $(DT_SCHEMA_FILES),-l $(DT_SCHEMA_FILES),-m)
> DT_BINDING_DIR := Documentation/devicetree/bindings
> DT_TMP_SCHEMA := $(objtree)/$(DT_BINDING_DIR)/processed-schema.json
> -
> -quiet_cmd_dtb = DTC_CHK $@
> - cmd_dtb = $(cmd_dtc) ; $(DT_CHECK_CMD) $@ || true
> -else
> -quiet_cmd_dtb = $(quiet_cmd_dtc)
> - cmd_dtb = $(cmd_dtc)
> +dtb-check-enabled = $(if $(filter %.dtb, $@),y)
> endif
>
> $(obj)/%.dtb: $(obj)/%.dts $(DTC) $(DT_TMP_SCHEMA) FORCE
> - $(call if_changed_dep,dtb)
> + $(call if_changed_dep,dtc)
>
> $(obj)/%.dtbo: $(src)/%.dtso $(DTC) FORCE
> $(call if_changed_dep,dtc)
> --
> 2.43.0
>
Looks good to me, thanks.
Reviewed-by: Nicolas Schier <nicolas@xxxxxxxxx>
