On 1/09/23 10:22, Chris Packham wrote:
> Hi,
>
> In earlier kernel versions (just reconfirmed on v6.4) I can do
>
> make ARCH=arm O=build multi_v7_defconfig
> make ARCH=arm O=build armada-xp-db-dxbc2.dtb
>
> and that one specific .dtb file will be generated.
>
> With v6.5 (and master, currently 87dfd85c3892) I get the following error
>
> make ARCH=arm O=build multi_v7_defconfig
> make ARCH=arm O=build armada-xp-db-dxbc2.dtb
> ...
> make[3]: *** No rule to make target
> 'arch/arm/boot/dts/armada-xp-db-dxbc2.dtb'. Stop.
> make[2]: *** [src/linux/Makefile:1469: armada-xp-db-dxbc2.dtb] Error 2
> make[1]: *** [src/linux/Makefile:234: __sub-make] Error 2
> make[1]: Leaving directory 'src/linux/build'
> make: *** [Makefile:234: __sub-make] Error 2
>
> I wasn't entirely sure which mailing list to direct this at so I've
> cast the net fairly wide. I'll try to setup an automated bisect and
> report back if I narrow the problem down.
Bisect points to 724ba6751532 ("ARM: dts: Move .dts files to vendor
sub-directories") which given the subject makes sense. I'll adjust our
build recipes to use the vendor prefix. Sorry for the noise.
