Re: [PATCH v2] kbuild: treat char as always unsigned

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Oct 19, 2022 at 02:30:34PM -0600, Jason A. Donenfeld wrote:
> Recently, some compile-time checking I added to the clamp_t family of
> functions triggered a build error when a poorly written driver was
> compiled on ARM, because the driver assumed that the naked `char` type
> is signed, but ARM treats it as unsigned, and the C standard says it's
> architecture-dependent.
> 
> I doubt this particular driver is the only instance in which
> unsuspecting authors make assumptions about `char` with no `signed` or
> `unsigned` specifier. We were lucky enough this time that that driver
> used `clamp_t(char, negative_value, positive_value)`, so the new
> checking code found it, and I've sent a patch to fix it, but there are
> likely other places lurking that won't be so easily unearthed.
> 
> So let's just eliminate this particular variety of heisensign bugs
> entirely. Set `-funsigned-char` globally, so that gcc makes the type
> unsigned on all architectures.
> 
> This will break things in some places and fix things in others, so this
> will likely cause a bit of churn while reconciling the type misuse.
> 

This is a very daring change and obviously is going to introduce bugs.
It might be better to create a static checker rule that says "char"
without explicit signedness can only be used for strings.

arch/parisc/kernel/drivers.c:337 print_hwpath() warn: impossible condition '(path->bc[i] == -1) => (0-255 == (-1))'
arch/parisc/kernel/drivers.c:410 setup_bus_id() warn: impossible condition '(path.bc[i] == -1) => (0-255 == (-1))'
arch/parisc/kernel/drivers.c:486 create_parisc_device() warn: impossible condition '(modpath->bc[i] == -1) => (0-255 == (-1))'
arch/parisc/kernel/drivers.c:759 hwpath_to_device() warn: impossible condition '(modpath->bc[i] == -1) => (0-255 == (-1))'
drivers/media/dvb-frontends/stv0288.c:471 stv0288_set_frontend() warn: assigning (-9) to unsigned variable 'tm'
drivers/media/dvb-frontends/stv0288.c:471 stv0288_set_frontend() warn: we never enter this loop
drivers/misc/sgi-gru/grumain.c:711 gru_check_chiplet_assignment() warn: 'gts->ts_user_chiplet_id' is unsigned
drivers/net/wireless/cisco/airo.c:5316 proc_wepkey_on_close() warn: assigning (-16) to unsigned variable 'key[i / 3]'
drivers/net/wireless/ralink/rt2x00/rt2800lib.c:9415 rt2800_iq_search() warn: assigning (-32) to unsigned variable 'idx0'
drivers/net/wireless/ralink/rt2x00/rt2800lib.c:9470 rt2800_iq_search() warn: assigning (-32) to unsigned variable 'perr'
drivers/video/fbdev/sis/init301.c:3549 SiS_GetCRT2Data301() warn: 'SiS_Pr->SiS_EModeIDTable[ModeIdIndex]->ROMMODEIDX661' is unsigned
sound/pci/au88x0/au88x0_core.c:2029 vortex_adb_checkinout() warn: signedness bug returning '(-22)'
sound/pci/au88x0/au88x0_core.c:2046 vortex_adb_checkinout() warn: signedness bug returning '(-12)'
sound/pci/au88x0/au88x0_core.c:2125 vortex_adb_allocroute() warn: 'vortex_adb_checkinout(vortex, (0), en, 0)' is unsigned
sound/pci/au88x0/au88x0_core.c:2170 vortex_adb_allocroute() warn: 'vortex_adb_checkinout(vortex, stream->resources, en, 4)' is unsigned
sound/pci/rme9652/hdsp.c:3953 hdsp_channel_buffer_location() warn: 'hdsp->channel_map[channel]' is unsigned
sound/pci/rme9652/rme9652.c:1833 rme9652_channel_buffer_location() warn: 'rme9652->channel_map[channel]' is unsigned

I did not know that ARM had unsigned chars.  I only knew about PPC and
on that arch they use char aggressively so that no one forgets that char
is unsigned.  Changing char to signed would have made people very
annoyed.  :P

regards,
dan carpenter



[Index of Archives]     [Linux&nblp;USB Development]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite Secrets]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux