Re: [PATCH v2 1/2] kbuild: use perl instead of shell to get file size

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Nov 24, 2021 at 4:30 PM Alex Xu (Hello71) <alex_y_xu@xxxxxxxx> wrote:
>
> This makes it easier to get the size of multiple files. Perl is already
> a requirement for all builds to do header checks, so this is not an
> additional dependency.

$ egrep -B1 -A4 'file-size.pl' build-log_5.15.9-1-amd64-clang13-lto.txt
49219-+ clang -nostdinc -I./arch/x86/include
-I./arch/x86/include/generated -I./include -I./arch/x86/include/uapi
-I./arch/x86/include/generated/uapi -I./include/uapi
-I./include/generated/uapi -include ./include/linux/compiler-version.h
-include ./include/linux/kconfig.h -D__KERNEL__ -Qunused-arguments
-fmacro-prefix-map=./= -D__AS
SEMBLY__ -fno-PIE --target=x86_64-linux-gnu -fintegrated-as
-Werror=unknown-warning-option -Werror=ignored-optimization-argument
-m64 -DCC_USING_NOP_MCOUNT -DCC_USING_
FENTRY -fno-lto -c -o .tmp_vmlinux.kallsyms2.o .tmp_vmlinux.kallsyms2.S
49220:+ perl ./scripts/file-size.pl .tmp_vmlinux.kallsyms1.o
49221-+ size1=1932072
49222:+ perl ./scripts/file-size.pl .tmp_vmlinux.kallsyms2.o
49223-+ size2=1932072
49224-+ [ 1932072 -ne 1932072 ]
49225-+ [ -n  ]
49226-+ vmlinux_link vmlinux .tmp_vmlinux.kallsyms2.o .btf.vmlinux.bin.o

Tested-by: Sedat Dilek <sedat.dilek@xxxxxxxxx>

- Sedat -

> ---
>  arch/arm/boot/deflate_xip_data.sh | 2 +-
>  arch/powerpc/boot/wrapper         | 2 +-
>  scripts/Makefile.lib              | 9 ++-------
>  scripts/file-size.pl              | 8 ++++++++
>  scripts/file-size.sh              | 4 ----
>  scripts/link-vmlinux.sh           | 4 ++--
>  6 files changed, 14 insertions(+), 15 deletions(-)
>  create mode 100755 scripts/file-size.pl
>  delete mode 100755 scripts/file-size.sh
>
> diff --git a/arch/arm/boot/deflate_xip_data.sh b/arch/arm/boot/deflate_xip_data.sh
> index 304495c3c2c5..14cfa2babb93 100755
> --- a/arch/arm/boot/deflate_xip_data.sh
> +++ b/arch/arm/boot/deflate_xip_data.sh
> @@ -43,7 +43,7 @@ data_start=$(($__data_loc - $base_offset))
>  data_end=$(($_edata_loc - $base_offset))
>
>  # Make sure data occupies the last part of the file.
> -file_end=$(${CONFIG_SHELL} "${srctree}/scripts/file-size.sh" "$XIPIMAGE")
> +file_end=$(${PERL} "${srctree}/scripts/file-size.pl" "$XIPIMAGE")
>  if [ "$file_end" != "$data_end" ]; then
>         printf "end of xipImage doesn't match with _edata_loc (%#x vs %#x)\n" \
>                $(($file_end + $base_offset)) $_edata_loc 1>&2
> diff --git a/arch/powerpc/boot/wrapper b/arch/powerpc/boot/wrapper
> index 9184eda780fd..9f9ee8613432 100755
> --- a/arch/powerpc/boot/wrapper
> +++ b/arch/powerpc/boot/wrapper
> @@ -380,7 +380,7 @@ vmz="$tmpdir/`basename \"$kernel\"`.$ext"
>
>  # Calculate the vmlinux.strip size
>  ${CROSS}objcopy $objflags "$kernel" "$vmz.$$"
> -strip_size=$(${CONFIG_SHELL} "${srctree}/scripts/file-size.sh" "$vmz.$$")
> +strip_size=$(${PERL} "${srctree}/scripts/file-size.pl" "$vmz.$$")
>
>  if [ -z "$cacheit" -o ! -f "$vmz$compression" -o "$vmz$compression" -ot "$kernel" ]; then
>      # recompress the image if we need to
> diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib
> index d1f865b8c0cb..ca901814986a 100644
> --- a/scripts/Makefile.lib
> +++ b/scripts/Makefile.lib
> @@ -379,13 +379,8 @@ dtc-tmp = $(subst $(comma),_,$(dot-target).dts.tmp)
>
>  # Bzip2 and LZMA do not include size in file... so we have to fake that;
>  # append the size as a 32-bit littleendian number as gzip does.
> -size_append = printf $(shell                                           \
> -dec_size=0;                                                            \
> -for F in $(real-prereqs); do                                   \
> -       fsize=$$($(CONFIG_SHELL) $(srctree)/scripts/file-size.sh $$F);  \
> -       dec_size=$$(expr $$dec_size + $$fsize);                         \
> -done;                                                                  \
> -printf "%08x\n" $$dec_size |                                           \
> +total_size = $(shell $(PERL) $(srctree)/scripts/file-size.pl $(real-prereqs))
> +size_append = printf $(shell printf "%08x\n" $(total_size) |           \
>         sed 's/\(..\)/\1 /g' | {                                        \
>                 read ch0 ch1 ch2 ch3;                                   \
>                 for ch in $$ch3 $$ch2 $$ch1 $$ch0; do                   \
> diff --git a/scripts/file-size.pl b/scripts/file-size.pl
> new file mode 100755
> index 000000000000..170bb6d048fa
> --- /dev/null
> +++ b/scripts/file-size.pl
> @@ -0,0 +1,8 @@
> +#!/usr/bin/perl -w
> +# SPDX-License-Identifier: GPL-2.0
> +my $total = 0;
> +foreach (@ARGV) {
> +    @stat = stat $_ or die "$_: $!";
> +    $total += $stat[7];
> +}
> +print "$total\n";
> diff --git a/scripts/file-size.sh b/scripts/file-size.sh
> deleted file mode 100755
> index 7eb7423416b5..000000000000
> --- a/scripts/file-size.sh
> +++ /dev/null
> @@ -1,4 +0,0 @@
> -#!/bin/sh
> -# SPDX-License-Identifier: GPL-2.0
> -set -- $(ls -dn "$1")
> -printf '%s\n' "$5"
> diff --git a/scripts/link-vmlinux.sh b/scripts/link-vmlinux.sh
> index 5cdd9bc5c385..c3fa38bd18ab 100755
> --- a/scripts/link-vmlinux.sh
> +++ b/scripts/link-vmlinux.sh
> @@ -384,8 +384,8 @@ if [ -n "${CONFIG_KALLSYMS}" ]; then
>         kallsyms_step 2
>
>         # step 3
> -       size1=$(${CONFIG_SHELL} "${srctree}/scripts/file-size.sh" ${kallsymso_prev})
> -       size2=$(${CONFIG_SHELL} "${srctree}/scripts/file-size.sh" ${kallsymso})
> +       size1=$(${PERL} "${srctree}/scripts/file-size.pl" ${kallsymso_prev})
> +       size2=$(${PERL} "${srctree}/scripts/file-size.pl" ${kallsymso})
>
>         if [ $size1 -ne $size2 ] || [ -n "${KALLSYMS_EXTRA_PASS}" ]; then
>                 kallsyms_step 3
> --
> 2.34.0
>



[Index of Archives]     [Linux&nblp;USB Development]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite Secrets]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux