Rust symbols can become quite long due to namespacing introduced
by modules, types, traits, generics, etc.
Increasing to 255 is not enough in some cases, and therefore
we need to introduce longer lengths to the symbol table.
In order to avoid increasing all lengths to 2 bytes (since most
of them are small, including many Rust ones), we use ULEB128 to
keep smaller symbols in 1 byte, with the rest in 2 bytes.
Co-developed-by: Alex Gaynor <alex.gaynor@xxxxxxxxx>
Signed-off-by: Alex Gaynor <alex.gaynor@xxxxxxxxx>
Co-developed-by: Wedson Almeida Filho <wedsonaf@xxxxxxxxxx>
Signed-off-by: Wedson Almeida Filho <wedsonaf@xxxxxxxxxx>
Co-developed-by: Gary Guo <gary@xxxxxxxxxxx>
Signed-off-by: Gary Guo <gary@xxxxxxxxxxx>
Co-developed-by: Boqun Feng <boqun.feng@xxxxxxxxx>
Signed-off-by: Boqun Feng <boqun.feng@xxxxxxxxx>
Signed-off-by: Miguel Ojeda <ojeda@xxxxxxxxxx>
---
kernel/kallsyms.c | 26 ++++++++++++++++++++++----
scripts/kallsyms.c | 29 ++++++++++++++++++++++++++---
2 files changed, 48 insertions(+), 7 deletions(-)
diff --git a/kernel/kallsyms.c b/kernel/kallsyms.c
index 3011bc33a5ba..80702273494a 100644
--- a/kernel/kallsyms.c
+++ b/kernel/kallsyms.c
@@ -69,12 +69,20 @@ static unsigned int kallsyms_expand_symbol(unsigned int off,
data = &kallsyms_names[off];
len = *data;
data++;
+ off++;
+
+ /* If MSB is 1, it is a "big" symbol, so needs an additional byte. */
+ if ((len & 0x80) != 0) {
+ len = (len & 0x7F) | (*data << 7);
+ data++;
+ off++;
+ }
/*
* Update the offset to return the offset for the next symbol on
* the compressed stream.
*/
- off += len + 1;
+ off += len;
/*
* For every byte on the compressed symbol data, copy the table
@@ -127,7 +135,7 @@ static char kallsyms_get_symbol_type(unsigned int off)
static unsigned int get_symbol_offset(unsigned long pos)
{
const u8 *name;
- int i;
+ int i, len;
/*
* Use the closest marker we have. We have markers every 256 positions,
@@ -141,8 +149,18 @@ static unsigned int get_symbol_offset(unsigned long pos)
* so we just need to add the len to the current pointer for every
* symbol we wish to skip.
*/
- for (i = 0; i < (pos & 0xFF); i++)
- name = name + (*name) + 1;
+ for (i = 0; i < (pos & 0xFF); i++) {
+ len = *name;
+
+ /*
+ * If MSB is 1, it is a "big" symbol, so we need to look into
+ * the next byte (and skip it, too).
+ */
+ if ((len & 0x80) != 0)
+ len = ((len & 0x7F) | (name[1] << 7)) + 1;
+
+ name = name + len + 1;
+ }
return name - kallsyms_names;
}
diff --git a/scripts/kallsyms.c b/scripts/kallsyms.c
index 54ad86d13784..79b11bb7f07d 100644
--- a/scripts/kallsyms.c
+++ b/scripts/kallsyms.c
@@ -470,12 +470,35 @@ static void write_src(void)
if ((i & 0xFF) == 0)
markers[i >> 8] = off;
- printf("\t.byte 0x%02x", table[i]->len);
+ /* There cannot be any symbol of length zero. */
+ if (table[i]->len == 0) {
+ fprintf(stderr, "kallsyms failure: "
+ "unexpected zero symbol length\n");
+ exit(EXIT_FAILURE);
+ }
+
+ /* Only lengths that fit in up-to-two-byte ULEB128 are supported. */
+ if (table[i]->len > 0x3FFF) {
+ fprintf(stderr, "kallsyms failure: "
+ "unexpected huge symbol length\n");
+ exit(EXIT_FAILURE);
+ }
+
+ /* Encode length with ULEB128. */
+ if (table[i]->len <= 0x7F) {
+ /* Most symbols use a single byte for the length. */
+ printf("\t.byte 0x%02x", table[i]->len);
+ off += table[i]->len + 1;
+ } else {
+ /* "Big" symbols use two bytes. */
+ printf("\t.byte 0x%02x, 0x%02x",
+ (table[i]->len & 0x7F) | 0x80,
+ (table[i]->len >> 7) & 0x7F);
+ off += table[i]->len + 2;
+ }
for (k = 0; k < table[i]->len; k++)
printf(", 0x%02x", table[i]->sym[k]);
printf("\n");
-
- off += table[i]->len + 1;
}
printf("\n");
--
2.34.0
