[PATCH v2 45/63] ath11k: Use memset_startat() for clearing queue descriptors

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



In preparation for FORTIFY_SOURCE performing compile-time and run-time
field bounds checking for memset(), avoid intentionally writing across
neighboring fields.

Use memset_startat() so memset() doesn't get confused about writing
beyond the destination member that is intended to be the starting point
of zeroing through the end of the struct. Additionally split up a later
field-spanning memset() so that memset() can reason about the size.

Cc: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
Cc: "David S. Miller" <davem@xxxxxxxxxxxxx>
Cc: Jakub Kicinski <kuba@xxxxxxxxxx>
Cc: ath11k@xxxxxxxxxxxxxxxxxxx
Cc: linux-wireless@xxxxxxxxxxxxxxx
Cc: netdev@xxxxxxxxxxxxxxx
Signed-off-by: Kees Cook <keescook@xxxxxxxxxxxx>
---
 drivers/net/wireless/ath/ath11k/hal_rx.c | 13 ++++++-------
 1 file changed, 6 insertions(+), 7 deletions(-)

diff --git a/drivers/net/wireless/ath/ath11k/hal_rx.c b/drivers/net/wireless/ath/ath11k/hal_rx.c
index 325055ca41ab..0bab425f5dc9 100644
--- a/drivers/net/wireless/ath/ath11k/hal_rx.c
+++ b/drivers/net/wireless/ath/ath11k/hal_rx.c
@@ -29,8 +29,7 @@ static int ath11k_hal_reo_cmd_queue_stats(struct hal_tlv_hdr *tlv,
 		  FIELD_PREP(HAL_TLV_HDR_LEN, sizeof(*desc));
 
 	desc = (struct hal_reo_get_queue_stats *)tlv->value;
-	memset(&desc->queue_addr_lo, 0,
-	       (sizeof(*desc) - sizeof(struct hal_reo_cmd_hdr)));
+	memset_startat(desc, 0, queue_addr_lo);
 
 	desc->cmd.info0 &= ~HAL_REO_CMD_HDR_INFO0_STATUS_REQUIRED;
 	if (cmd->flag & HAL_REO_CMD_FLG_NEED_STATUS)
@@ -62,8 +61,7 @@ static int ath11k_hal_reo_cmd_flush_cache(struct ath11k_hal *hal, struct hal_tlv
 		  FIELD_PREP(HAL_TLV_HDR_LEN, sizeof(*desc));
 
 	desc = (struct hal_reo_flush_cache *)tlv->value;
-	memset(&desc->cache_addr_lo, 0,
-	       (sizeof(*desc) - sizeof(struct hal_reo_cmd_hdr)));
+	memset_startat(desc, 0, cache_addr_lo);
 
 	desc->cmd.info0 &= ~HAL_REO_CMD_HDR_INFO0_STATUS_REQUIRED;
 	if (cmd->flag & HAL_REO_CMD_FLG_NEED_STATUS)
@@ -101,8 +99,7 @@ static int ath11k_hal_reo_cmd_update_rx_queue(struct hal_tlv_hdr *tlv,
 		  FIELD_PREP(HAL_TLV_HDR_LEN, sizeof(*desc));
 
 	desc = (struct hal_reo_update_rx_queue *)tlv->value;
-	memset(&desc->queue_addr_lo, 0,
-	       (sizeof(*desc) - sizeof(struct hal_reo_cmd_hdr)));
+	memset_startat(desc, 0, queue_addr_lo);
 
 	desc->cmd.info0 &= ~HAL_REO_CMD_HDR_INFO0_STATUS_REQUIRED;
 	if (cmd->flag & HAL_REO_CMD_FLG_NEED_STATUS)
@@ -762,15 +759,17 @@ void ath11k_hal_reo_qdesc_setup(void *vaddr, int tid, u32 ba_window_size,
 	 * size changes and also send WMI message to FW to change the REO
 	 * queue descriptor in Rx peer entry as part of dp_rx_tid_update.
 	 */
-	memset(ext_desc, 0, 3 * sizeof(*ext_desc));
+	memset(ext_desc, 0, sizeof(*ext_desc));
 	ath11k_hal_reo_set_desc_hdr(&ext_desc->desc_hdr, HAL_DESC_REO_OWNED,
 				    HAL_DESC_REO_QUEUE_EXT_DESC,
 				    REO_QUEUE_DESC_MAGIC_DEBUG_PATTERN_1);
 	ext_desc++;
+	memset(ext_desc, 0, sizeof(*ext_desc));
 	ath11k_hal_reo_set_desc_hdr(&ext_desc->desc_hdr, HAL_DESC_REO_OWNED,
 				    HAL_DESC_REO_QUEUE_EXT_DESC,
 				    REO_QUEUE_DESC_MAGIC_DEBUG_PATTERN_2);
 	ext_desc++;
+	memset(ext_desc, 0, sizeof(*ext_desc));
 	ath11k_hal_reo_set_desc_hdr(&ext_desc->desc_hdr, HAL_DESC_REO_OWNED,
 				    HAL_DESC_REO_QUEUE_EXT_DESC,
 				    REO_QUEUE_DESC_MAGIC_DEBUG_PATTERN_3);
-- 
2.30.2




[Index of Archives]     [Linux&nblp;USB Development]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite Secrets]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux