Describe using Symbol Namespaces from a perspective of a user. I.e. module authors or subsystem maintainers. Signed-off-by: Matthias Maennich <maennich@xxxxxxxxxx> --- Documentation/kbuild/namespaces.rst | 154 +++++++++++++++++++++++ Documentation/kernel-hacking/hacking.rst | 18 +++ 2 files changed, 172 insertions(+) create mode 100644 Documentation/kbuild/namespaces.rst diff --git a/Documentation/kbuild/namespaces.rst b/Documentation/kbuild/namespaces.rst new file mode 100644 index 000000000000..982ed7b568ac --- /dev/null +++ b/Documentation/kbuild/namespaces.rst @@ -0,0 +1,154 @@ +================= +Symbol Namespaces +================= + +The following document describes how to use Symbol Namespaces to structure the +export surface of in-kernel symbols exported through the family of +EXPORT_SYMBOL() macros. + +.. Table of Contents + + === 1 Introduction + === 2 How to define Symbol Namespaces + --- 2.1 Using the EXPORT_SYMBOL macros + --- 2.2 Using the DEFAULT_SYMBOL_NAMESPACE define + === 3 How to use Symbols exported in Namespaces + === 4 Loading Modules that use namespaced Symbols + === 5 Automatically creating MODULE_IMPORT_NS statements + +1. Introduction +=============== + +Symbol Namespaces have been introduced as a means to structure the export +surface of the in-kernel API. It allows subsystem maintainers to partition +their exported symbols into separate namespaces. That is useful for +documentation purposes (think of the SUBSYSTEM_DEBUG namespace) as well as for +limiting the availability of a set of symbols for use in other parts of the +kernel. As of today, modules that make use of symbols exported into namespaces, +are required to import the namespace. Otherwise the kernel will, depending on +its configuration, reject loading the module or warn about a missing import. + +2. How to define Symbol Namespaces +================================== + +Symbols can be exported into namespace using different methods. All of them are +changing the way EXPORT_SYMBOL and friends are instrumented to create ksymtab +entries. + +2.1 Using the EXPORT_SYMBOL macros +================================== + +In addition to the macros EXPORT_SYMBOL() and EXPORT_SYMBOL_GPL(), that allow +exporting of kernel symbols to the kernel symbol table, variants of these are +available to export symbols into a certain namespace: EXPORT_SYMBOL_NS() and +EXPORT_SYMBOL_NS_GPL(). They take one additional argument: the namespace. +Please note that due to macro expansion that argument needs to be a +preprocessor symbol. E.g. to export the symbol `usb_stor_suspend` into the +namespace `USB_STORAGE`, use:: + + EXPORT_SYMBOL_NS(usb_stor_suspend, USB_STORAGE); + +The corresponding ksymtab entry struct `kernel_symbol` will have the member +`namespace` set accordingly. A symbol that is exported without a namespace will +refer to `NULL`. There is no default namespace if none is defined. `modpost` +and kernel/module.c make use the namespace at build time or module load time, +respectively. + +2.2 Using the DEFAULT_SYMBOL_NAMESPACE define +============================================= + +Defining namespaces for all symbols of a subsystem can be very verbose and may +become hard to maintain. Therefore a default define (DEFAULT_SYMBOL_NAMESPACE) +is been provided, that, if set, will become the default for all EXPORT_SYMBOL() +and EXPORT_SYMBOL_GPL() macro expansions that do not specify a namespace. + +There are multiple ways of specifying this define and it depends on the +subsystem and the maintainer's preference, which one to use. The first option +is to define the default namespace in the `Makefile` of the subsystem. E.g. to +export all symbols defined in usb-common into the namespace USB_COMMON, add a +line like this to drivers/usb/common/Makefile:: + + ccflags-y += -DDEFAULT_SYMBOL_NAMESPACE=USB_COMMON + +That will affect all EXPORT_SYMBOL() and EXPORT_SYMBOL_GPL() statements. A +symbol exported with EXPORT_SYMBOL_NS() while this definition is present, will +still be exported into the namespace that is passed as the namespace argument +as this argument has preference over a default symbol namespace. + +A second option to define the default namespace is directly in the compilation +unit as preprocessor statement. The above example would then read:: + + #undef DEFAULT_SYMBOL_NAMESPACE + #define DEFAULT_SYMBOL_NAMESPACE USB_COMMON + +within the corresponding compilation unit before any EXPORT_SYMBOL macro is +used. + +3. How to use Symbols exported in Namespaces +============================================ + +In order to use symbols that are exported into namespaces, kernel modules need +to explicitly import these namespaces. Otherwise the kernel might reject to +load the module. The module code is required to use the macro MODULE_IMPORT_NS +for the namespaces it uses symbols from. E.g. a module using the +usb_stor_suspend symbol from above, needs to import the namespace USB_STORAGE +using a statement like:: + + MODULE_IMPORT_NS(USB_STORAGE); + +This will create a `modinfo` tag in the module for each imported namespace. +This has the side effect, that the imported namespaces of a module can be +inspected with modinfo:: + + $ modinfo drivers/usb/storage/ums-karma.ko + [...] + import_ns: USB_STORAGE + [...] + + +It is advisable to add the MODULE_IMPORT_NS() statement close to other module +metadata definitions like MODULE_AUTHOR() or MODULE_LICENSE(). Refer to section +5. for a way to create missing import statements automatically. + +4. Loading Modules that use namespaced Symbols +============================================== + +At module loading time (e.g. `insmod`), the kernel will check each symbol +referenced from the module for its availability and whether the namespace it +might be exported to has been imported by the module. The default behaviour of +the kernel is to reject loading modules that don't specify sufficient imports. +An error will be logged and loading will be failed with EINVAL. In order to +allow loading of modules that don't satisfy this precondition, a configuration +option is available: Setting MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS=y will +enable loading regardless, but will emit a warning. + +5. Automatically creating MODULE_IMPORT_NS statements +===================================================== + +Missing namespaces imports can easily be detected at build time. In fact, +modpost will emit a warning if a module uses a symbol from a namespace +without importing it. +MODULE_IMPORT_NS() statements will usually be added at a definite location +(along with other module meta data). To make the life of module authors (and +subsystem maintainers) easier, a script and make target is available to fixup +missing imports. Fixing missing imports can be done with:: + + $ make nsdeps + +A typical scenario for module authors would be:: + + - write code that depends on a symbol from a not imported namespace + - `make` + - notice the warning of modpost telling about a missing import + - run `make nsdeps` to add the import to the correct code location + +For subsystem maintainers introducing a namespace, the steps are very similar. +Again, `make nsdeps` will eventually add the missing namespace imports for +in-tree modules:: + + - move or add symbols to a namespace (e.g. with EXPORT_SYMBOL_NS()) + - `make` (preferably with an allmodconfig to cover all in-kernel + modules) + - notice the warning of modpost telling about a missing import + - run `make nsdeps` to add the import to the correct code location + diff --git a/Documentation/kernel-hacking/hacking.rst b/Documentation/kernel-hacking/hacking.rst index 5891a701a159..a3ddb213a5e1 100644 --- a/Documentation/kernel-hacking/hacking.rst +++ b/Documentation/kernel-hacking/hacking.rst @@ -594,6 +594,24 @@ internal implementation issue, and not really an interface. Some maintainers and developers may however require EXPORT_SYMBOL_GPL() when adding any new APIs or functionality. +:c:func:`EXPORT_SYMBOL_NS()` +---------------------------- + +Defined in ``include/linux/export.h`` + +This is the variant of `EXPORT_SYMBOL()` that allows specifying a symbol +namespace. Symbol Namespaces are documented in +``Documentation/kbuild/namespaces.rst``. + +:c:func:`EXPORT_SYMBOL_NS_GPL()` +-------------------------------- + +Defined in ``include/linux/export.h`` + +This is the variant of `EXPORT_SYMBOL_GPL()` that allows specifying a symbol +namespace. Symbol Namespaces are documented in +``Documentation/kbuild/namespaces.rst``. + Routines and Conventions ======================== -- 2.23.0.187.g17f5b7556c-goog
