> Hi, > > On 5/1/19 4:01 PM, Brendan Higgins wrote: > > Add documentation for KUnit, the Linux kernel unit testing framework. > > - Add intro and usage guide for KUnit > > - Add API reference > > > > Signed-off-by: Felix Guo <felixguoxiuping@xxxxxxxxx> > > Signed-off-by: Brendan Higgins <brendanhiggins@xxxxxxxxxx> > > --- > > Documentation/index.rst | 1 + > > Documentation/kunit/api/index.rst | 16 ++ > > Documentation/kunit/api/test.rst | 15 + > > Documentation/kunit/faq.rst | 46 +++ > > Documentation/kunit/index.rst | 80 ++++++ > > Documentation/kunit/start.rst | 180 ++++++++++++ > > Documentation/kunit/usage.rst | 447 ++++++++++++++++++++++++++++++ > > 7 files changed, 785 insertions(+) > > create mode 100644 Documentation/kunit/api/index.rst > > create mode 100644 Documentation/kunit/api/test.rst > > create mode 100644 Documentation/kunit/faq.rst > > create mode 100644 Documentation/kunit/index.rst > > create mode 100644 Documentation/kunit/start.rst > > create mode 100644 Documentation/kunit/usage.rst > > > > > diff --git a/Documentation/kunit/api/index.rst b/Documentation/kunit/api/index.rst > > new file mode 100644 > > index 0000000000000..c31c530088153 > > --- /dev/null > > +++ b/Documentation/kunit/api/index.rst > > @@ -0,0 +1,16 @@ > > +.. SPDX-License-Identifier: GPL-2.0 > > + > > +============= > > +API Reference > > +============= > > +.. toctree:: > > + > > + test > > + > > +This section documents the KUnit kernel testing API. It is divided into 3 > > +sections: > > + > > +================================= ============================================== > > +:doc:`test` documents all of the standard testing API > > + excluding mocking or mocking related features. > > +================================= ============================================== > > What 3 sections does the above refer to? seems to be missing. Whoops, that references documentation added in a later patch (not included in this patchset). Thanks for pointing this out, will fix in next revision. > > diff --git a/Documentation/kunit/start.rst b/Documentation/kunit/start.rst > > new file mode 100644 > > index 0000000000000..5cdba5091905e > > --- /dev/null > > +++ b/Documentation/kunit/start.rst > > @@ -0,0 +1,180 @@ > > +.. SPDX-License-Identifier: GPL-2.0 > > + > > +=============== > > +Getting Started > > +=============== > > + > > +Installing dependencies > > +======================= > > +KUnit has the same dependencies as the Linux kernel. As long as you can build > > +the kernel, you can run KUnit. > > + > > +KUnit Wrapper > > +============= > > +Included with KUnit is a simple Python wrapper that helps format the output to > > +easily use and read KUnit output. It handles building and running the kernel, as > > +well as formatting the output. > > + > > +The wrapper can be run with: > > + > > +.. code-block:: bash > > + > > + ./tools/testing/kunit/kunit.py > > + > > +Creating a kunitconfig > > +====================== > > +The Python script is a thin wrapper around Kbuild as such, it needs to be > > around Kbuild. As such, > > > +configured with a ``kunitconfig`` file. This file essentially contains the > > +regular Kernel config, with the specific test targets as well. > > + > > +.. code-block:: bash > > + > > + git clone -b master https://kunit.googlesource.com/kunitconfig $PATH_TO_KUNITCONFIG_REPO > > + cd $PATH_TO_LINUX_REPO > > + ln -s $PATH_TO_KUNIT_CONFIG_REPO/kunitconfig kunitconfig > > + > > +You may want to add kunitconfig to your local gitignore. > > + > > +Verifying KUnit Works > > +------------------------- > > I would expect Sphinx to complain about the underline length not being the > same as the header/title above it. Hmmm...I am pretty sure it wasn't complaining to me, but that might just be because I didn't build with the right verbosity options or something. My experience mostly comes from Markdown which doesn't care about this. In any case, after some random spot checks it looks like everyone else uniformly keeps the line under sections to be the same length. So it looks like I need to fix this regardless. Will fix in the next revision. Thanks for pointing this out! > > + > > +To make sure that everything is set up correctly, simply invoke the Python > > +wrapper from your kernel repo: > > + > > +.. code-block:: bash > > + > > + ./tools/testing/kunit/kunit.py > > + > > +.. note:: > > + You may want to run ``make mrproper`` first. > > + > > +If everything worked correctly, you should see the following: > > + > > +.. code-block:: bash > > + > > + Generating .config ... > > + Building KUnit Kernel ... > > + Starting KUnit Kernel ... > > + > > +followed by a list of tests that are run. All of them should be passing. > > + > > +.. note:: > > + Because it is building a lot of sources for the first time, the ``Building > > + kunit kernel`` step may take a while. > > + > > +Writing your first test > > +========================== > > underline length warning? > > > + > > +In your kernel repo let's add some code that we can test. Create a file > > +``drivers/misc/example.h`` with the contents: > > + > > +.. code-block:: c > > + > > + int misc_example_add(int left, int right); > > + > > +create a file ``drivers/misc/example.c``: > > + > > +.. code-block:: c > > + > > + #include <linux/errno.h> > > + > > + #include "example.h" > > + > > + int misc_example_add(int left, int right) > > + { > > + return left + right; > > + } > > + > > +Now add the following lines to ``drivers/misc/Kconfig``: > > + > > +.. code-block:: kconfig > > + > > + config MISC_EXAMPLE > > + bool "My example" > > + > > +and the following lines to ``drivers/misc/Makefile``: > > + > > +.. code-block:: make > > + > > + obj-$(CONFIG_MISC_EXAMPLE) += example.o > > + > > +Now we are ready to write the test. The test will be in > > +``drivers/misc/example-test.c``: > > + > > +.. code-block:: c > > + > > + #include <kunit/test.h> > > + #include "example.h" > > + > > + /* Define the test cases. */ > > + > > + static void misc_example_add_test_basic(struct kunit *test) > > + { > > + KUNIT_EXPECT_EQ(test, 1, misc_example_add(1, 0)); > > + KUNIT_EXPECT_EQ(test, 2, misc_example_add(1, 1)); > > + KUNIT_EXPECT_EQ(test, 0, misc_example_add(-1, 1)); > > + KUNIT_EXPECT_EQ(test, INT_MAX, misc_example_add(0, INT_MAX)); > > + KUNIT_EXPECT_EQ(test, -1, misc_example_add(INT_MAX, INT_MIN)); > > + } > > + > > + static void misc_example_test_failure(struct kunit *test) > > + { > > + KUNIT_FAIL(test, "This test never passes."); > > + } > > + > > + static struct kunit_case misc_example_test_cases[] = { > > + KUNIT_CASE(misc_example_add_test_basic), > > + KUNIT_CASE(misc_example_test_failure), > > + {}, > > + }; > > + > > + static struct kunit_module misc_example_test_module = { > > + .name = "misc-example", > > + .test_cases = misc_example_test_cases, > > + }; > > + module_test(misc_example_test_module); > > + > > +Now add the following to ``drivers/misc/Kconfig``: > > + > > +.. code-block:: kconfig > > + > > + config MISC_EXAMPLE_TEST > > + bool "Test for my example" > > + depends on MISC_EXAMPLE && KUNIT > > + > > +and the following to ``drivers/misc/Makefile``: > > + > > +.. code-block:: make > > + > > + obj-$(CONFIG_MISC_EXAMPLE_TEST) += example-test.o > > + > > +Now add it to your ``kunitconfig``: > > + > > +.. code-block:: none > > + > > + CONFIG_MISC_EXAMPLE=y > > + CONFIG_MISC_EXAMPLE_TEST=y > > + > > +Now you can run the test: > > + > > +.. code-block:: bash > > + > > + ./tools/testing/kunit/kunit.py > > + > > +You should see the following failure: > > + > > +.. code-block:: none > > + > > + ... > > + [16:08:57] [PASSED] misc-example:misc_example_add_test_basic > > + [16:08:57] [FAILED] misc-example:misc_example_test_failure > > + [16:08:57] EXPECTATION FAILED at drivers/misc/example-test.c:17 > > + [16:08:57] This test never passes. > > + ... > > + > > +Congrats! You just wrote your first KUnit test! > > + > > +Next Steps > > +============= > > underline length warning. (?) > > > +* Check out the :doc:`usage` page for a more > > + in-depth explanation of KUnit. > > diff --git a/Documentation/kunit/usage.rst b/Documentation/kunit/usage.rst > > new file mode 100644 > > index 0000000000000..5c83ea9e21bc5 > > --- /dev/null > > +++ b/Documentation/kunit/usage.rst > > @@ -0,0 +1,447 @@ > > +.. SPDX-License-Identifier: GPL-2.0 > > + > > +============= > > +Using KUnit > > +============= > > over/underline length warnings? > > > + > > +The purpose of this document is to describe what KUnit is, how it works, how it > > +is intended to be used, and all the concepts and terminology that are needed to > > +understand it. This guide assumes a working knowledge of the Linux kernel and > > +some basic knowledge of testing. > > + > > +For a high level introduction to KUnit, including setting up KUnit for your > > +project, see :doc:`start`. > > + > > +Organization of this document > > +================================= > > underline length? (and more below, but not being marked) > > > + > > +This document is organized into two main sections: Testing and Isolating > > +Behavior. The first covers what a unit test is and how to use KUnit to write > > +them. The second covers how to use KUnit to isolate code and make it possible > > +to unit test code that was otherwise un-unit-testable. > > + > > +Testing > > +========== > > + > > +What is KUnit? > > +------------------ > > + > > +"K" is short for "kernel" so "KUnit" is the "(Linux) Kernel Unit Testing > > +Framework." KUnit is intended first and foremost for writing unit tests; it is > > +general enough that it can be used to write integration tests; however, this is > > +a secondary goal. KUnit has no ambition of being the only testing framework for > > +the kernel; for example, it does not intend to be an end-to-end testing > > +framework. > > + > > +What is Unit Testing? > > +------------------------- Thanks!
