Hi Michal,
On Thu, Dec 6, 2018 at 12:41 AM Michal Simek <monstr@xxxxxxxxx> wrote:
>
> On 03. 12. 18 8:50, Masahiro Yamada wrote:
> > "make ARCH=microblaze help" mentions simpleImage.<dt>.unstrip,
> > but it never works because Makefile assumes "system.unstrip" is
> > the name of DT.
> >
> > $ make ARCH=microblaze CROSS_COMPILE=microblaze-linux- simpleImage.system.unstrip
> > [ snip ]
> > make[1]: *** No rule to make target 'arch/microblaze/boot/dts/system.unstrip.dtb', needed by 'arch/microblaze/boot/dts/system.dtb'. Stop.
> > make: *** [Makefile;1060: arch/microblaze/boot/dts] Error 2
> > make: *** Waiting for unfinished jobs....
> >
> > Rip off the never-working target.
> >
> > In my understanding, simpleImage.<dt> works like a phony target that
> > generates multiple images. Reflect the behavior to the help message.
> >
> > Signed-off-by: Masahiro Yamada <yamada.masahiro@xxxxxxxxxxxxx>
> > ---
> >
> > arch/microblaze/Makefile | 4 +---
> > 1 file changed, 1 insertion(+), 3 deletions(-)
> >
> > diff --git a/arch/microblaze/Makefile b/arch/microblaze/Makefile
> > index 0823d29..97e1384 100644
> > --- a/arch/microblaze/Makefile
> > +++ b/arch/microblaze/Makefile
> > @@ -89,9 +89,7 @@ define archhelp
> > echo '* linux.bin - Create raw binary'
> > echo ' linux.bin.gz - Create compressed raw binary'
> > echo ' linux.bin.ub - Create U-Boot wrapped raw binary'
> > - echo ' simpleImage.<dt> - ELF image with $(arch)/boot/dts/<dt>.dts linked in'
> > - echo ' - stripped elf with fdt blob'
> > - echo ' simpleImage.<dt>.unstrip - full ELF image with fdt blob'
> > + echo ' simpleImage.<dt> - Create images with $(arch)/boot/dts/<dt>.dts linked in'
> > echo ' *_defconfig - Select default config from arch/microblaze/configs'
> > echo ''
> > echo ' Targets with <dt> embed a device tree blob inside the image'
> >
>
> I understand what you are trying to say but I would still like to keep
> information about unstrip file.
> It is correct that it is not build target. It is just generated file and
> message above was used for description what it is.
> Definitely agree that this should be the part of targets but it should
> be in description.
> The same is for missing description for simpleImage.<dt>.strip and
> simpleImage.<dt>.ub files.
>
> Thanks,
> Michal
>
If we want to be precise to the current behavior,
we could describe more.
(Is it too much?)
Architecture specific targets (microblaze):
* linux.bin - Create raw binary
linux.bin.gz - Create compressed raw binary
linux.bin.ub - Create U-Boot wrapped raw binary
simpleImage.<dt> - Create the following images with
arch/macroblaze/boot/dts/<dt>.dts linked in
simpleImage.<dt> : raw image
simpleImage.<dt>.ub : raw image with U-Boot header
simpleImage.<dt>.unstrip: ELF (identical to vmlinux)
simpleImage.<dt>.strip : stripped ELF
*_defconfig - Select default config from arch/microblaze/configs
If you want to modify as you like,
I will not touch it though.
BTW, "make ARCH=microblaze help" looks like follows:
* linux.bin - Create raw binary
linux.bin.gz - Create compressed raw binary
linux.bin.ub - Create U-Boot wrapped raw binary
simpleImage.<dt> - ELF image with /boot/dts/<dt>.dts linked in
- stripped elf with fdt blob
simpleImage.<dt>.unstrip - full ELF image with fdt blob
*_defconfig - Select default config from arch/microblaze/configs
Since "arch" is not set anywhere, $(arch) is empty,
"ELF image with /boot/dts/<dt>.dts linked in" looks strange.
--
Best Regards
Masahiro Yamada
