Re: [PATCH v2] scripts/kconfig/merge_config: don't redefine 'y' to 'm'

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sun, 11 Nov 2018 at 05:43, Masahiro Yamada
<yamada.masahiro@xxxxxxxxxxxxx> wrote:
>
> On Fri, Nov 9, 2018 at 4:45 AM Anders Roxell <anders.roxell@xxxxxxxxxx> wrote:
> >
> > In today's merge_config.sh the order of the config fragment files dictates
> > the output of a config option. With this approach we will get different
> > .config files depending on the order of the config fragment files.
> >
> > So doing something like:
> > $ ./merge/kconfig/merge_config.sh selftest.config drm.config
> >
> > Where selftest.config defines DRM=y and drm.config defines DRM=m, the
> > result will be "DRM=m".
> >
> > Rework to add a switch to get builtin '=y' precedence over modules '=m',
> > this will result in "DRM=y". If we do something like this:
> >
> > $ ./merge/kconfig/merge_config.sh -y selftest.config drm.config
> >
> > Suggested-by: Arnd Bergmann <arnd@xxxxxxxx>
> > Signed-off-by: Anders Roxell <anders.roxell@xxxxxxxxxx>
> > ---
> >  scripts/kconfig/merge_config.sh | 34 +++++++++++++++++++++++++++------
> >  1 file changed, 28 insertions(+), 6 deletions(-)
> >
> > diff --git a/scripts/kconfig/merge_config.sh b/scripts/kconfig/merge_config.sh
> > index da66e7742282..fcd18f642fc7 100755
> > --- a/scripts/kconfig/merge_config.sh
> > +++ b/scripts/kconfig/merge_config.sh
> > @@ -22,6 +22,7 @@
> >
> >  clean_up() {
> >         rm -f $TMP_FILE
> > +       rm -f $MERGE_FILE
> >         exit
> >  }
> >  trap clean_up HUP INT TERM
> > @@ -32,6 +33,7 @@ usage() {
> >         echo "  -m    only merge the fragments, do not execute the make command"
> >         echo "  -n    use allnoconfig instead of alldefconfig"
> >         echo "  -r    list redundant entries when merging fragments"
> > +       echo "  -y    make builtin have precedence over modules"
> >         echo "  -O    dir to put generated output files.  Consider setting \$KCONFIG_CONFIG instead."
> >         echo
> >         echo "Used prefix: '$CONFIG_PREFIX'. You can redefine it with \$CONFIG_ environment variable."
> > @@ -40,6 +42,8 @@ usage() {
> >  RUNMAKE=true
> >  ALLTARGET=alldefconfig
> >  WARNREDUN=false
> > +BUILTIN=false
> > +BUILTIN_FLAG=false
>
>
> Could you move the initialization of BUILTIN_FLAG
> into the inner for-loop ?
>
>
>
> >  OUTPUT=.
> >  CONFIG_PREFIX=${CONFIG_-CONFIG_}
> >
> > @@ -64,6 +68,11 @@ while true; do
> >                 shift
> >                 continue
> >                 ;;
> > +       "-y")
> > +               BUILTIN=true
> > +               shift
> > +               continue
> > +               ;;
> >         "-O")
> >                 if [ -d $2 ];then
> >                         OUTPUT=$(echo $2 | sed 's/\/*$//')
> > @@ -105,13 +114,15 @@ MERGE_LIST=$*
> >  SED_CONFIG_EXP="s/^\(# \)\{0,1\}\(${CONFIG_PREFIX}[a-zA-Z0-9_]*\)[= ].*/\2/p"
> >
> >  TMP_FILE=$(mktemp ./.tmp.config.XXXXXXXXXX)
> > +MERGE_FILE=$(mktemp ./.merge_tmp.config.XXXXXXXXXX)
> >
> >  echo "Using $INITFILE as base"
> >  cat $INITFILE > $TMP_FILE
> >
> >  # Merge files, printing warnings on overridden values
> > -for MERGE_FILE in $MERGE_LIST ; do
> > -       echo "Merging $MERGE_FILE"
> > +for ORIG_MERGE_FILE in $MERGE_LIST ; do
> > +       cat $ORIG_MERGE_FILE > $MERGE_FILE
>
>
> This 'cat' should be moved after the check
> of the presence of '$ORIG_MERGE_FILE'.
>
>
> > +       echo "Merging $ORIG_MERGE_FILE"
> >         if [ ! -r "$MERGE_FILE" ]; then
>
> This check always returns false now.
>
>
> >                 echo "The merge file '$MERGE_FILE' does not exist.  Exit." >&2
> >                 exit 1
> > @@ -122,15 +133,26 @@ for MERGE_FILE in $MERGE_LIST ; do
> >                 grep -q -w $CFG $TMP_FILE || continue
> >                 PREV_VAL=$(grep -w $CFG $TMP_FILE)
> >                 NEW_VAL=$(grep -w $CFG $MERGE_FILE)
>
> Could you add 'BUILTIN_FLAG=false' here?
>
>
>
> > -               if [ "x$PREV_VAL" != "x$NEW_VAL" ] ; then
> > -                       echo Value of $CFG is redefined by fragment $MERGE_FILE:
> > +               if [ "$BUILTIN" = "true" ] && [ "${NEW_VAL#CONFIG_*=}" = "m" ] && [ "${PREV_VAL#CONFIG_*=}" = "y" ]; then
> > +                       echo Previous  value: $PREV_VAL
> > +                       echo New value:       $NEW_VAL
> > +                       echo -y passed, will not demote y to m
> > +                       echo
> > +                       BUILTIN_FLAG=true
> > +               elif [ "x$PREV_VAL" != "x$NEW_VAL" ] ; then
> > +                       echo Value of $CFG is redefined by fragment $ORIG_MERGE_FILE:
> >                         echo Previous  value: $PREV_VAL
> >                         echo New value:       $NEW_VAL
> >                         echo
> >                 elif [ "$WARNREDUN" = "true" ]; then
> > -                       echo Value of $CFG is redundant by fragment $MERGE_FILE:
> > +                       echo Value of $CFG is redundant by fragment $ORIG_MERGE_FILE:
> > +               fi
> > +               if [ "$BUILTIN_FLAG" = "false" ]; then
> > +                       sed -i "/$CFG[ =]/d" $TMP_FILE
> > +               else
> > +                       sed -i "/$CFG[ =]/d" $MERGE_FILE
> > +                       BUILTIN_FLAG=false
>
>
> Then this 'BUILTIN_FLAG=false' can go away.

Thank you Masahiro, will send out an update shortly where I address
all your comments.

Cheers,
Anders

>
> Thanks.
>
>
> >                 fi
> > -               sed -i "/$CFG[ =]/d" $TMP_FILE
> >         done
> >         cat $MERGE_FILE >> $TMP_FILE
> >  done
> > --
> > 2.19.1
> >
>
>
> --
> Best Regards
> Masahiro Yamada



[Index of Archives]     [Linux&nblp;USB Development]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite Secrets]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux