Re: [PATCH] kconfig: do not require pkg-config on make {menu,n}config

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



2018-08-31 18:34 GMT+09:00 Masahiro Yamada <yamada.masahiro@xxxxxxxxxxxxx>:
> Meelis Roos reported a {menu,n}config regression:
>
>  "I have libncurses devel package installed in the default system
>   location (as do 99%+ on actual developers probably) and in this
>   case, pkg-config is useless.  pkg-config is needed only when
>   libraries and headers are installed in non-default locations but
>   it is bad to require installation of pkg-config on all the machines
>   where make menuconfig would be possibly run."
>
> For {menu,n}config, do not use pkg-config if it is not installed.
> For {g,x}config, keep checking pkg-config since we really rely on it
> for finding the installation paths of the required packages.
>
> Fixes: 4ab3b80159d4 ("kconfig: check for pkg-config on make {menu,n,g,x}config")
> Reported-by: Meelis Roos <mroos@xxxxxxxx>
> Signed-off-by: Masahiro Yamada <yamada.masahiro@xxxxxxxxxxxxx>
> ---



Applied to linux-kbuild/fixes.


>  Documentation/process/changes.rst  |  2 +-
>  scripts/kconfig/Makefile           |  1 -
>  scripts/kconfig/check-pkgconfig.sh |  8 --------
>  scripts/kconfig/gconf-cfg.sh       |  7 +++++++
>  scripts/kconfig/mconf-cfg.sh       | 25 ++++++++++++++-----------
>  scripts/kconfig/nconf-cfg.sh       | 25 ++++++++++++++-----------
>  scripts/kconfig/qconf-cfg.sh       |  7 +++++++
>  7 files changed, 43 insertions(+), 32 deletions(-)
>  delete mode 100644 scripts/kconfig/check-pkgconfig.sh
>
> diff --git a/Documentation/process/changes.rst b/Documentation/process/changes.rst
> index 61f918b..d1bf143 100644
> --- a/Documentation/process/changes.rst
> +++ b/Documentation/process/changes.rst
> @@ -86,7 +86,7 @@ pkg-config
>
>  The build system, as of 4.18, requires pkg-config to check for installed
>  kconfig tools and to determine flags settings for use in
> -'make {menu,n,g,x}config'.  Previously pkg-config was being used but not
> +'make {g,x}config'.  Previously pkg-config was being used but not
>  verified or documented.
>
>  Flex
> diff --git a/scripts/kconfig/Makefile b/scripts/kconfig/Makefile
> index 4a7bd21..67ed9f6 100644
> --- a/scripts/kconfig/Makefile
> +++ b/scripts/kconfig/Makefile
> @@ -221,7 +221,6 @@ $(obj)/zconf.tab.o: $(obj)/zconf.lex.c
>
>  # check if necessary packages are available, and configure build flags
>  define filechk_conf_cfg
> -       $(CONFIG_SHELL) $(srctree)/scripts/kconfig/check-pkgconfig.sh; \
>         $(CONFIG_SHELL) $<
>  endef
>
> diff --git a/scripts/kconfig/check-pkgconfig.sh b/scripts/kconfig/check-pkgconfig.sh
> deleted file mode 100644
> index 7a1c40b..0000000
> --- a/scripts/kconfig/check-pkgconfig.sh
> +++ /dev/null
> @@ -1,8 +0,0 @@
> -#!/bin/sh
> -# SPDX-License-Identifier: GPL-2.0
> -# Check for pkg-config presence
> -
> -if [ -z $(command -v pkg-config) ]; then
> -       echo "'make *config' requires 'pkg-config'. Please install it." 1>&2
> -       exit 1
> -fi
> diff --git a/scripts/kconfig/gconf-cfg.sh b/scripts/kconfig/gconf-cfg.sh
> index 533b3d8..480ecd8 100755
> --- a/scripts/kconfig/gconf-cfg.sh
> +++ b/scripts/kconfig/gconf-cfg.sh
> @@ -3,6 +3,13 @@
>
>  PKG="gtk+-2.0 gmodule-2.0 libglade-2.0"
>
> +if [ -z "$(command -v pkg-config)" ]; then
> +       echo >&2 "*"
> +       echo >&2 "* 'make gconfig' requires 'pkg-config'. Please install it."
> +       echo >&2 "*"
> +       exit 1
> +fi
> +
>  if ! pkg-config --exists $PKG; then
>         echo >&2 "*"
>         echo >&2 "* Unable to find the GTK+ installation. Please make sure that"
> diff --git a/scripts/kconfig/mconf-cfg.sh b/scripts/kconfig/mconf-cfg.sh
> index e6f9fac..c812872d 100755
> --- a/scripts/kconfig/mconf-cfg.sh
> +++ b/scripts/kconfig/mconf-cfg.sh
> @@ -4,20 +4,23 @@
>  PKG="ncursesw"
>  PKG2="ncurses"
>
> -if pkg-config --exists $PKG; then
> -       echo cflags=\"$(pkg-config --cflags $PKG)\"
> -       echo libs=\"$(pkg-config --libs $PKG)\"
> -       exit 0
> -fi
> +if [ -n "$(command -v pkg-config)" ]; then
> +       if pkg-config --exists $PKG; then
> +               echo cflags=\"$(pkg-config --cflags $PKG)\"
> +               echo libs=\"$(pkg-config --libs $PKG)\"
> +               exit 0
> +       fi
>
> -if pkg-config --exists $PKG2; then
> -       echo cflags=\"$(pkg-config --cflags $PKG2)\"
> -       echo libs=\"$(pkg-config --libs $PKG2)\"
> -       exit 0
> +       if pkg-config --exists $PKG2; then
> +               echo cflags=\"$(pkg-config --cflags $PKG2)\"
> +               echo libs=\"$(pkg-config --libs $PKG2)\"
> +               exit 0
> +       fi
>  fi
>
> -# Unfortunately, some distributions (e.g. openSUSE) cannot find ncurses
> -# by pkg-config.
> +# Check the default paths in case pkg-config is not installed.
> +# (Even if it is installed, some distributions such as openSUSE cannot
> +# find ncurses by pkg-config.)
>  if [ -f /usr/include/ncursesw/ncurses.h ]; then
>         echo cflags=\"-D_GNU_SOURCE -I/usr/include/ncursesw\"
>         echo libs=\"-lncursesw\"
> diff --git a/scripts/kconfig/nconf-cfg.sh b/scripts/kconfig/nconf-cfg.sh
> index 42f5ac7..001559e 100644
> --- a/scripts/kconfig/nconf-cfg.sh
> +++ b/scripts/kconfig/nconf-cfg.sh
> @@ -4,20 +4,23 @@
>  PKG="ncursesw menuw panelw"
>  PKG2="ncurses menu panel"
>
> -if pkg-config --exists $PKG; then
> -       echo cflags=\"$(pkg-config --cflags $PKG)\"
> -       echo libs=\"$(pkg-config --libs $PKG)\"
> -       exit 0
> -fi
> +if [ -n "$(command -v pkg-config)" ]; then
> +       if pkg-config --exists $PKG; then
> +               echo cflags=\"$(pkg-config --cflags $PKG)\"
> +               echo libs=\"$(pkg-config --libs $PKG)\"
> +               exit 0
> +       fi
>
> -if pkg-config --exists $PKG2; then
> -       echo cflags=\"$(pkg-config --cflags $PKG2)\"
> -       echo libs=\"$(pkg-config --libs $PKG2)\"
> -       exit 0
> +       if pkg-config --exists $PKG2; then
> +               echo cflags=\"$(pkg-config --cflags $PKG2)\"
> +               echo libs=\"$(pkg-config --libs $PKG2)\"
> +               exit 0
> +       fi
>  fi
>
> -# Unfortunately, some distributions (e.g. openSUSE) cannot find ncurses
> -# by pkg-config.
> +# Check the default paths in case pkg-config is not installed.
> +# (Even if it is installed, some distributions such as openSUSE cannot
> +# find ncurses by pkg-config.)
>  if [ -f /usr/include/ncursesw/ncurses.h ]; then
>         echo cflags=\"-D_GNU_SOURCE -I/usr/include/ncursesw\"
>         echo libs=\"-lncursesw -lmenuw -lpanelw\"
> diff --git a/scripts/kconfig/qconf-cfg.sh b/scripts/kconfig/qconf-cfg.sh
> index 0862e15..02ccc0a 100755
> --- a/scripts/kconfig/qconf-cfg.sh
> +++ b/scripts/kconfig/qconf-cfg.sh
> @@ -4,6 +4,13 @@
>  PKG="Qt5Core Qt5Gui Qt5Widgets"
>  PKG2="QtCore QtGui"
>
> +if [ -z "$(command -v pkg-config)" ]; then
> +       echo >&2 "*"
> +       echo >&2 "* 'make xconfig' requires 'pkg-config'. Please install it."
> +       echo >&2 "*"
> +       exit 1
> +fi
> +
>  if pkg-config --exists $PKG; then
>         echo cflags=\"-std=c++11 -fPIC $(pkg-config --cflags Qt5Core Qt5Gui Qt5Widgets)\"
>         echo libs=\"$(pkg-config --libs $PKG)\"
> --
> 2.7.4
>



-- 
Best Regards
Masahiro Yamada



[Index of Archives]     [Linux&nblp;USB Development]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite Secrets]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux