There is nothing arch specific about building dtb files other than their
location under /arch/*/boot/dts/. Keeping each arch aligned is a pain.
The dependencies and supported targets are all slightly different.
Also, a cross-compiler for each arch is needed, but really the host
compiler preprocessor is perfectly fine for building dtbs. Move the
build rules to a common location and remove the arch specific ones. This
is done in a single step to avoid warnings about overriding rules.
The build dependencies had been a mixture of 'scripts' and/or 'prepare'.
These pull in several dependencies some of which need a target compiler
(specifically devicetable-offsets.h) and aren't needed to build dtbs.
All that is really needed is dtc, so adjust the dependencies to only be
dtc.
This change enables support 'dtbs_install' on some arches which were
missing the target.
Cc: Masahiro Yamada <yamada.masahiro@xxxxxxxxxxxxx>
Cc: Michal Marek <michal.lkml@xxxxxxxxxxx>
Cc: Vineet Gupta <vgupta@xxxxxxxxxxxx>
Cc: Russell King <linux@xxxxxxxxxxxxxxx>
Cc: Catalin Marinas <catalin.marinas@xxxxxxx>
Cc: Will Deacon <will.deacon@xxxxxxx>
Cc: Yoshinori Sato <ysato@xxxxxxxxxxxxxxxxxxxx>
Cc: Michal Simek <monstr@xxxxxxxxx>
Cc: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
Cc: Paul Burton <paul.burton@xxxxxxxx>
Cc: James Hogan <jhogan@xxxxxxxxxx>
Cc: Ley Foon Tan <lftan@xxxxxxxxxx>
Cc: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>
Cc: Paul Mackerras <paulus@xxxxxxxxx>
Cc: Michael Ellerman <mpe@xxxxxxxxxxxxxx>
Cc: Chris Zankel <chris@xxxxxxxxxx>
Cc: Max Filippov <jcmvbkbc@xxxxxxxxx>
Cc: linux-kbuild@xxxxxxxxxxxxxxx
Cc: linux-snps-arc@xxxxxxxxxxxxxxxxxxx
Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
Cc: uclinux-h8-devel@xxxxxxxxxxxxxxxxxxxx
Cc: linux-mips@xxxxxxxxxxxxxx
Cc: nios2-dev@xxxxxxxxxxxxxxxxxxxxxx
Cc: linuxppc-dev@xxxxxxxxxxxxxxxx
Cc: linux-xtensa@xxxxxxxxxxxxxxxx
Signed-off-by: Rob Herring <robh@xxxxxxxxxx>
---
Makefile | 30 ++++++++++++++++++++++++++++++
arch/arc/Makefile | 6 ------
arch/arm/Makefile | 20 +-------------------
arch/arm64/Makefile | 17 +----------------
arch/c6x/Makefile | 2 --
arch/h8300/Makefile | 11 +----------
arch/microblaze/Makefile | 4 +---
arch/mips/Makefile | 15 +--------------
arch/nds32/Makefile | 2 +-
arch/nios2/Makefile | 7 -------
arch/nios2/boot/Makefile | 4 ----
arch/powerpc/Makefile | 3 ---
arch/xtensa/Makefile | 12 +-----------
scripts/Makefile | 1 -
scripts/Makefile.lib | 2 +-
15 files changed, 38 insertions(+), 98 deletions(-)
diff --git a/Makefile b/Makefile
index c13f8b85ba60..6d89e673f192 100644
--- a/Makefile
+++ b/Makefile
@@ -1212,6 +1212,30 @@ kselftest-merge:
$(srctree)/tools/testing/selftests/*/config
+$(Q)$(MAKE) -f $(srctree)/Makefile olddefconfig
+# ---------------------------------------------------------------------------
+# Devicetree files
+
+dtstree := $(wildcard arch/$(SRCARCH)/boot/dts)
+
+ifdef CONFIG_OF_EARLY_FLATTREE
+
+%.dtb %.dtb.S %.dtb.o: | dtc
+ $(Q)$(MAKE) $(build)=$(dtstree) $(dtstree)/$@
+
+PHONY += dtbs
+dtbs: | dtc
+ $(Q)$(MAKE) $(build)=$(dtstree)
+
+dtbs_install: dtbs
+ $(Q)$(MAKE) $(dtbinst)=$(dtstree)
+
+all: dtbs
+
+dtc:
+ $(Q)$(MAKE) $(build)=scripts/dtc
+
+endif
+
# ---------------------------------------------------------------------------
# Modules
@@ -1425,6 +1449,12 @@ help:
@echo ' kselftest-merge - Merge all the config dependencies of kselftest to existing'
@echo ' .config.'
@echo ''
+ @$(if $(dtstree), \
+ echo 'Devicetree:'; \
+ echo '* dtbs - Build device tree blobs for enabled boards'; \
+ echo ' dtbs_install - Install dtbs to $(INSTALL_DTBS_PATH)'; \
+ echo '')
+
@echo 'Userspace tools targets:'
@echo ' use "make tools/help"'
@echo ' or "cd tools; make help"'
diff --git a/arch/arc/Makefile b/arch/arc/Makefile
index 6c1b20dd76ad..cbfb7a16b570 100644
--- a/arch/arc/Makefile
+++ b/arch/arc/Makefile
@@ -132,11 +132,5 @@ boot_targets += uImage uImage.bin uImage.gz
$(boot_targets): vmlinux
$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
-%.dtb %.dtb.S %.dtb.o: scripts
- $(Q)$(MAKE) $(build)=$(boot)/dts $(boot)/dts/$@
-
-dtbs: scripts
- $(Q)$(MAKE) $(build)=$(boot)/dts
-
archclean:
$(Q)$(MAKE) $(clean)=$(boot)
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index e7d703d8fac3..7f02ef8dfdb2 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -308,12 +308,7 @@ else
KBUILD_IMAGE := $(boot)/zImage
endif
-# Build the DT binary blobs if we have OF configured
-ifeq ($(CONFIG_USE_OF),y)
-KBUILD_DTBS := dtbs
-endif
-
-all: $(notdir $(KBUILD_IMAGE)) $(KBUILD_DTBS)
+all: $(notdir $(KBUILD_IMAGE))
archheaders:
@@ -340,17 +335,6 @@ $(BOOT_TARGETS): vmlinux
$(INSTALL_TARGETS):
$(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $@
-%.dtb: | scripts
- $(Q)$(MAKE) $(build)=$(boot)/dts MACHINE=$(MACHINE) $(boot)/dts/$@
-
-PHONY += dtbs dtbs_install
-
-dtbs: prepare scripts
- $(Q)$(MAKE) $(build)=$(boot)/dts
-
-dtbs_install:
- $(Q)$(MAKE) $(dtbinst)=$(boot)/dts
-
PHONY += vdso_install
vdso_install:
ifeq ($(CONFIG_VDSO),y)
@@ -372,8 +356,6 @@ define archhelp
echo ' uImage - U-Boot wrapped zImage'
echo ' bootpImage - Combined zImage and initial RAM disk'
echo ' (supply initrd image via make variable INITRD=<path>)'
- echo '* dtbs - Build device tree blobs for enabled boards'
- echo ' dtbs_install - Install dtbs to $(INSTALL_DTBS_PATH)'
echo ' install - Install uncompressed kernel'
echo ' zinstall - Install compressed kernel'
echo ' uinstall - Install U-Boot wrapped compressed kernel'
diff --git a/arch/arm64/Makefile b/arch/arm64/Makefile
index efe61a2e4b5e..5e7320b2212d 100644
--- a/arch/arm64/Makefile
+++ b/arch/arm64/Makefile
@@ -113,9 +113,8 @@ core-$(CONFIG_EFI_STUB) += $(objtree)/drivers/firmware/efi/libstub/lib.a
# Default target when executing plain make
boot := arch/arm64/boot
KBUILD_IMAGE := $(boot)/Image.gz
-KBUILD_DTBS := dtbs
-all: Image.gz $(KBUILD_DTBS)
+all: Image.gz
Image: vmlinux
@@ -127,17 +126,6 @@ Image.%: Image
zinstall install:
$(Q)$(MAKE) $(build)=$(boot) $@
-%.dtb: scripts
- $(Q)$(MAKE) $(build)=$(boot)/dts $(boot)/dts/$@
-
-PHONY += dtbs dtbs_install
-
-dtbs: prepare scripts
- $(Q)$(MAKE) $(build)=$(boot)/dts
-
-dtbs_install:
- $(Q)$(MAKE) $(dtbinst)=$(boot)/dts
-
PHONY += vdso_install
vdso_install:
$(Q)$(MAKE) $(build)=arch/arm64/kernel/vdso $@
@@ -145,7 +133,6 @@ vdso_install:
# We use MRPROPER_FILES and CLEAN_FILES now
archclean:
$(Q)$(MAKE) $(clean)=$(boot)
- $(Q)$(MAKE) $(clean)=$(boot)/dts
# We need to generate vdso-offsets.h before compiling certain files in kernel/.
# In order to do that, we should use the archprepare target, but we can't since
@@ -160,8 +147,6 @@ vdso_prepare: prepare0
define archhelp
echo '* Image.gz - Compressed kernel image (arch/$(ARCH)/boot/Image.gz)'
echo ' Image - Uncompressed kernel image (arch/$(ARCH)/boot/Image)'
- echo '* dtbs - Build device tree blobs for enabled boards'
- echo ' dtbs_install - Install dtbs to $(INSTALL_DTBS_PATH)'
echo ' install - Install uncompressed kernel'
echo ' zinstall - Install compressed kernel'
echo ' Install using (your) ~/bin/installkernel or'
diff --git a/arch/c6x/Makefile b/arch/c6x/Makefile
index 6ab942e6c534..ea4390021384 100644
--- a/arch/c6x/Makefile
+++ b/arch/c6x/Makefile
@@ -41,9 +41,7 @@ boot := arch/$(ARCH)/boot
DTB:=$(subst dtbImage.,,$(filter dtbImage.%, $(MAKECMDGOALS)))
export DTB
-ifneq ($(DTB),)
core-y += $(boot)/dts/
-endif
# With make 3.82 we cannot mix normal and wildcard targets
diff --git a/arch/h8300/Makefile b/arch/h8300/Makefile
index e1c02ca230cb..b4adab9697c3 100644
--- a/arch/h8300/Makefile
+++ b/arch/h8300/Makefile
@@ -27,21 +27,12 @@ CROSS_COMPILE := h8300-unknown-linux-
endif
core-y += arch/$(ARCH)/kernel/ arch/$(ARCH)/mm/
-ifneq '$(CONFIG_H8300_BUILTIN_DTB)' '""'
-core-y += arch/h8300/boot/dts/
-endif
+core-y += arch/$(ARCH)/boot/dts/
libs-y += arch/$(ARCH)/lib/
boot := arch/h8300/boot
-%.dtb %.dtb.S %.dtb.o: | scripts
- $(Q)$(MAKE) $(build)=arch/h8300/boot/dts arch/h8300/boot/dts/$@
-
-PHONY += dtbs
-dtbs: scripts
- $(Q)$(MAKE) $(build)=arch/h8300/boot/dts
-
archmrproper:
archclean:
diff --git a/arch/microblaze/Makefile b/arch/microblaze/Makefile
index d269dd4b8279..3e58b2317d09 100644
--- a/arch/microblaze/Makefile
+++ b/arch/microblaze/Makefile
@@ -65,9 +65,7 @@ boot := arch/microblaze/boot
# Are we making a simpleImage.<boardname> target? If so, crack out the boardname
DTB:=$(subst simpleImage.,,$(filter simpleImage.%, $(MAKECMDGOALS)))
-ifneq ($(DTB),)
- core-y += $(boot)/dts/
-endif
+core-y += $(boot)/dts/
# defines filename extension depending memory management type
ifeq ($(CONFIG_MMU),)
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index 5425df002a6b..8cb5994db05a 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -407,18 +407,7 @@ endif
CLEAN_FILES += vmlinux.32 vmlinux.64
# device-trees
-core-$(CONFIG_BUILTIN_DTB) += arch/mips/boot/dts/
-
-%.dtb %.dtb.S %.dtb.o: | scripts
- $(Q)$(MAKE) $(build)=arch/mips/boot/dts arch/mips/boot/dts/$@
-
-PHONY += dtbs
-dtbs: scripts
- $(Q)$(MAKE) $(build)=arch/mips/boot/dts
-
-PHONY += dtbs_install
-dtbs_install:
- $(Q)$(MAKE) $(dtbinst)=arch/mips/boot/dts
+core-y += arch/mips/boot/dts/
archprepare:
ifdef CONFIG_MIPS32_N32
@@ -461,8 +450,6 @@ define archhelp
echo ' uImage.lzma - U-Boot image (lzma)'
echo ' uImage.lzo - U-Boot image (lzo)'
echo ' uzImage.bin - U-Boot image (self-extracting)'
- echo ' dtbs - Device-tree blobs for enabled boards'
- echo ' dtbs_install - Install dtbs to $(INSTALL_DTBS_PATH)'
echo
echo ' These will be default as appropriate for a configured platform.'
echo
diff --git a/arch/nds32/Makefile b/arch/nds32/Makefile
index 031c676821ff..4ec91e48ad4e 100644
--- a/arch/nds32/Makefile
+++ b/arch/nds32/Makefile
@@ -43,7 +43,7 @@ CHECKFLAGS += -D__NDS32_EB__
endif
boot := arch/nds32/boot
-core-$(BUILTIN_DTB) += $(boot)/dts/
+core-y += $(boot)/dts/
.PHONY: FORCE
diff --git a/arch/nios2/Makefile b/arch/nios2/Makefile
index db2e78fe65c7..52c03e60b114 100644
--- a/arch/nios2/Makefile
+++ b/arch/nios2/Makefile
@@ -56,12 +56,6 @@ all: vmImage
archclean:
$(Q)$(MAKE) $(clean)=$(nios2-boot)
-%.dtb %.dtb.S %.dtb.o: | scripts
- $(Q)$(MAKE) $(build)=$(nios2-boot)/dts $(nios2-boot)/dts/$@
-
-dtbs:
- $(Q)$(MAKE) $(build)=$(nios2-boot)/dts
-
$(BOOT_TARGETS): vmlinux
$(Q)$(MAKE) $(build)=$(nios2-boot) $(nios2-boot)/$@
@@ -74,5 +68,4 @@ define archhelp
echo ' (your) ~/bin/$(INSTALLKERNEL) or'
echo ' (distribution) /sbin/$(INSTALLKERNEL) or'
echo ' install to $$(INSTALL_PATH)'
- echo ' dtbs - Build device tree blobs for enabled boards'
endef
diff --git a/arch/nios2/boot/Makefile b/arch/nios2/boot/Makefile
index 0b48f1bf086d..37dfc7e584bc 100644
--- a/arch/nios2/boot/Makefile
+++ b/arch/nios2/boot/Makefile
@@ -31,9 +31,5 @@ $(obj)/zImage: $(obj)/compressed/vmlinux FORCE
$(obj)/compressed/vmlinux: $(obj)/vmlinux.gz FORCE
$(Q)$(MAKE) $(build)=$(obj)/compressed $@
-targets += $(dtb-y)
-
-$(obj)/dtbs: $(addprefix $(obj)/, $(dtb-y))
-
install:
sh $(srctree)/$(src)/install.sh $(KERNELRELEASE) $(BOOTIMAGE) System.map "$(INSTALL_PATH)"
diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile
index 9bacffa3b72e..b5845146451b 100644
--- a/arch/powerpc/Makefile
+++ b/arch/powerpc/Makefile
@@ -293,9 +293,6 @@ $(BOOT_TARGETS2): vmlinux
bootwrapper_install:
$(Q)$(MAKE) $(build)=$(boot) $(patsubst %,$(boot)/%,$@)
-%.dtb: scripts
- $(Q)$(MAKE) $(build)=$(boot)/dts $(patsubst %,$(boot)/dts/%,$@)
-
# Used to create 'merged defconfigs'
# To use it $(call) it with the first argument as the base defconfig
# and the second argument as a space separated list of .config files to merge,
diff --git a/arch/xtensa/Makefile b/arch/xtensa/Makefile
index 3a934b72a272..2c1b20cf75c2 100644
--- a/arch/xtensa/Makefile
+++ b/arch/xtensa/Makefile
@@ -84,28 +84,18 @@ LIBGCC := $(shell $(CC) $(KBUILD_CFLAGS) -print-libgcc-file-name)
head-y := arch/xtensa/kernel/head.o
core-y += arch/xtensa/kernel/ arch/xtensa/mm/
core-y += $(buildvar) $(buildplf)
+core-y += arch/xtensa/boot/dts/
libs-y += arch/xtensa/lib/ $(LIBGCC)
drivers-$(CONFIG_OPROFILE) += arch/xtensa/oprofile/
-ifneq ($(CONFIG_BUILTIN_DTB),"")
-core-$(CONFIG_OF) += arch/xtensa/boot/dts/
-endif
-
boot := arch/xtensa/boot
all Image zImage uImage: vmlinux
$(Q)$(MAKE) $(build)=$(boot) $@
-%.dtb:
- $(Q)$(MAKE) $(build)=$(boot)/dts $(boot)/dts/$@
-
-dtbs: scripts
- $(Q)$(MAKE) $(build)=$(boot)/dts
-
define archhelp
@echo '* Image - Kernel ELF image with reset vector'
@echo '* zImage - Compressed kernel image (arch/xtensa/boot/images/zImage.*)'
@echo '* uImage - U-Boot wrapped image'
- @echo ' dtbs - Build device tree blobs for enabled boards'
endef
diff --git a/scripts/Makefile b/scripts/Makefile
index 61affa300d25..a716a6b10954 100644
--- a/scripts/Makefile
+++ b/scripts/Makefile
@@ -39,7 +39,6 @@ build_unifdef: $(obj)/unifdef
subdir-$(CONFIG_MODVERSIONS) += genksyms
subdir-y += mod
subdir-$(CONFIG_SECURITY_SELINUX) += selinux
-subdir-$(CONFIG_DTC) += dtc
subdir-$(CONFIG_GDB_SCRIPTS) += gdb
# Let clean descend into subdirs
diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib
index df0fff252619..9f619f54bc90 100644
--- a/scripts/Makefile.lib
+++ b/scripts/Makefile.lib
@@ -283,7 +283,7 @@ $(obj)/%.dtb.S: $(obj)/%.dtb FORCE
quiet_cmd_dtc = DTC $@
cmd_dtc = mkdir -p $(dir ${dtc-tmp}) ; \
- $(CPP) $(dtc_cpp_flags) -x assembler-with-cpp -o $(dtc-tmp) $< ; \
+ $(HOSTCC) -E $(dtc_cpp_flags) -x assembler-with-cpp -o $(dtc-tmp) $< ; \
$(DTC) -O dtb -o $@ -b 0 \
$(addprefix -i,$(dir $<) $(DTC_INCLUDE)) $(DTC_FLAGS) \
-d $(depfile).dtc.tmp $(dtc-tmp) ; \
--
2.17.1
