On 04/30/2018 05:57 PM, Ulf Magnusson wrote: > Hello, > > Kconfiglib (https://github.com/ulfalizer/Kconfiglib) now has a > terminal menuconfig implementation, implemented in plain curses > (which is in the Python standard library). > > The interface should feel familiar to people used to mconf. It has > some features that mconf lacks: > > - Seamless resizing > > - Unicode support > > - Runs on Windows (via 'pip install windows-curses', which uses > PDCurses) > > - Improved information displays: > > * All expressions are split into readable chunks > > * Menus and comments have information displays > > - Relatively easy-to-read and easy-to-tweak code. > > Kconfiglib automatically invalidates symbols as needed, and > values can never get stale, which helps. > > Some upcoming features are mouse support and a search feature that > can jump directly to the definition of a symbol. The jump-to feature > will use a "show-all" mode in case the symbol isn't visible. > > See the Kconfiglib GitHub page for screenshots. The menuconfig > implementation is at > https://github.com/ulfalizer/Kconfiglib/blob/master/menuconfig.py. > The docstring at the top has some more information. Hi, I'm probably missing some python additive (I hope it's that easy), but menuconfig.py is not liking the "degree" symbol in drivers/net/can/peak_canfd/Kconfig: config CAN_PEAK_PCIEFD depends on PCI tristate "PEAK-System PCAN-PCIe FD cards" ---help--- This driver adds support for the PEAK-System PCI Express FD CAN-FD cards family. These 1x or 2x CAN-FD channels cards offer CAN 2.0 a/b as well as CAN-FD access to the CAN bus. Besides the nominal bitrate of up to 1 Mbit/s, the data bytes of CAN-FD frames can be transmitted with up to 12 Mbit/s. A galvanic isolation of the CAN ports protects the electronics of the card and the respective computer against disturbances of up to 500 Volts. The PCAN-PCI Express FD can be operated with ambient temperatures in a range of -40 to +85 °C. kconfiglib.KconfigSyntaxError: Malformed ascii in drivers/net/can/peak_canfd/Kconfig Context: b't temperatures in a range of -40 to +85 \xc2\xb0C.\n' Problematic data: b'\xc2' Reason: ordinal not in range(128) thanks, -- ~Randy -- To unsubscribe from this list: send the line "unsubscribe linux-kbuild" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
