Hi Frank,
On 15/12/17 22:06, Frank Rowand wrote:
On 12/14/17 07:12, Andre Heider wrote:
The overlay feature requires the base dtb to be built with symbols, so
lets build the dtbs with symbols when overlay support was explicitly
enabled.
With CONFIG_OF_ALL_DTBS on ARCH=arm the 989 dtb files grow about ~38% on
average.
Totals in bytes with the 3 biggest ones:
Before:
90471 arch/arm/boot/dts/am57xx-beagle-x15-revc.dtb
90521 arch/arm/boot/dts/am57xx-beagle-x15-revb1.dtb
92639 arch/arm/boot/dts/dra7-evm.dtb
25731296 total
After:
133203 arch/arm/boot/dts/am57xx-beagle-x15-revc.dtb
133237 arch/arm/boot/dts/am57xx-beagle-x15-revb1.dtb
134545 arch/arm/boot/dts/dra7-evm.dtb
35464440 total
Signed-off-by: Andre Heider <a.heider@xxxxxxxxx>
---
Hi,
while playing around with overlays I noticed that I needed to rebuilt
my distro's device trees because they didn't come with symbols.
Is that for a reason, maybe the not so minor increase in size?
Yes, size is the issue.
Thanks,
Andre
drivers/of/unittest-data/Makefile | 7 -------
scripts/Makefile.lib | 5 +++++
2 files changed, 5 insertions(+), 7 deletions(-)
diff --git a/drivers/of/unittest-data/Makefile b/drivers/of/unittest-data/Makefile
index 32389acfa616..b65061013512 100644
--- a/drivers/of/unittest-data/Makefile
+++ b/drivers/of/unittest-data/Makefile
@@ -15,13 +15,6 @@ targets += overlay.dtb overlay.dtb.S
targets += overlay_bad_phandle.dtb overlay_bad_phandle.dtb.S
targets += overlay_bad_symbol.dtb overlay_bad_symbol.dtb.S
targets += overlay_base.dtb overlay_base.dtb.S
-
-# enable creation of __symbols__ node
-DTC_FLAGS_overlay := -@
-DTC_FLAGS_overlay_bad_phandle := -@
-DTC_FLAGS_overlay_bad_symbol := -@
-DTC_FLAGS_overlay_base := -@
-
endif
.PRECIOUS: \
No. The unittests require these to be set unconditionally.
diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib
index 1ca4dcd2d500..c7ba4aa8a07a 100644
--- a/scripts/Makefile.lib
+++ b/scripts/Makefile.lib
@@ -278,6 +278,11 @@ DTC_FLAGS += -Wnode_name_chars_strict \
-Wproperty_name_chars_strict
endif
+ifeq ($(CONFIG_OF_OVERLAY),y)
+# enable creation of __symbols__ node
+DTC_FLAGS += -@
+endif
+
DTC_FLAGS += $(DTC_FLAGS_$(basetarget))
# Generate an assembly file to wrap the output of the device tree compiler
Not needed. Instead set DTC_FLAGS in the make command. For example:
DTC_FLAGS=-@ make qcom-apq8074-dragonboard.dtb
There are a few architecture Makefiles that need to be fixed to not unconditionally
set DTC_FLAGS.
Rebuilding the dts files manually with symbols isn't the problem. The
idea was to enable it with a switch which distros simply can flip.
Passing DTC_FLAGS to `make` would work too I guess, but on multi
platform builds that's still the same issue if there're boards which
can't handle that because of the size increase.
Would a solution which enables symbols per family work?
E.g. CONFIG_MACH_SUN7I chooses to use -@ because it can handle it.
Thanks,
Andre
--
To unsubscribe from this list: send the line "unsubscribe linux-kbuild" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
