From: Riku Voipio <riku.voipio@xxxxxxxxxx> Move debian/ directory generation out of builddeb to a new script, mkdebian. The package build commands are kept in builddeb, which is now and internal command called from debian/rules. With these changes in place, we can now use dpkg-buildpackage from deb-pkg and bindeb-pkg removing need for handrulled source/changes generation. This patch is based on the criticism of the current state of builddeb discussed on: https://patchwork.kernel.org/patch/9656403/ Signed-off-by: Riku Voipio <riku.voipio@xxxxxxxxxx> --- scripts/package/Makefile | 14 ++- scripts/package/builddeb | 233 +---------------------------------------------- scripts/package/mkdebian | 209 ++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 221 insertions(+), 235 deletions(-) create mode 100755 scripts/package/mkdebian diff --git a/scripts/package/Makefile b/scripts/package/Makefile index 9867638896ad..176158c9b7da 100644 --- a/scripts/package/Makefile +++ b/scripts/package/Makefile @@ -92,12 +92,18 @@ quiet_cmd_builddeb = BUILDDEB deb-pkg: FORCE $(MAKE) clean $(call cmd,src_tar,$(KDEB_SOURCENAME)) - $(MAKE) KBUILD_SRC= - +$(call cmd,builddeb) + $(call cmd,updateversion) + mv $(KDEB_SOURCENAME).tar.gz ../$(KDEB_SOURCENAME)_$(KERNELRELEASE).orig.tar.gz + $(CONFIG_SHELL) $(srctree)/scripts/package/mkdebian + dpkg-buildpackage -r"fakeroot -u" -a$$(cat debian/arch) -i.git bindeb-pkg: FORCE - $(MAKE) KBUILD_SRC= - +$(call cmd,builddeb) + $(call cmd,updateversion) + $(CONFIG_SHELL) $(srctree)/scripts/package/mkdebian + dpkg-buildpackage -r"fakeroot -u" -a$$(cat debian/arch) -b + +intdeb-pkg: FORCE + $(call cmd,builddeb) clean-dirs += $(objtree)/debian/ diff --git a/scripts/package/builddeb b/scripts/package/builddeb index aad67000e4dd..584404f7a473 100755 --- a/scripts/package/builddeb +++ b/scripts/package/builddeb @@ -30,67 +30,11 @@ create_package() { chmod -R a+rX "$pdir" # Create the package - dpkg-gencontrol $forcearch -Vkernel:debarch="${debarch}" -p$pname -P"$pdir" + dpkg-gencontrol -p$pname -P"$pdir" dpkg --build "$pdir" .. } -set_debarch() { - # Attempt to find the correct Debian architecture - case "$UTS_MACHINE" in - i386|ia64|alpha) - debarch="$UTS_MACHINE" ;; - x86_64) - debarch=amd64 ;; - sparc*) - debarch=sparc ;; - s390*) - debarch=s390$(grep -q CONFIG_64BIT=y $KCONFIG_CONFIG && echo x || true) ;; - ppc*) - debarch=$(grep -q CPU_LITTLE_ENDIAN=y $KCONFIG_CONFIG && echo ppc64el || echo powerpc) ;; - parisc*) - debarch=hppa ;; - mips*) - debarch=mips$(grep -q CPU_LITTLE_ENDIAN=y $KCONFIG_CONFIG && echo el || true) ;; - aarch64|arm64) - debarch=arm64 ;; - arm*) - if grep -q CONFIG_AEABI=y $KCONFIG_CONFIG; then - if grep -q CONFIG_VFP=y $KCONFIG_CONFIG; then - debarch=armhf - else - debarch=armel - fi - else - debarch=arm - fi - ;; - *) - debarch=$(dpkg --print-architecture) - echo "" >&2 - echo "** ** ** WARNING ** ** **" >&2 - echo "" >&2 - echo "Your architecture doesn't have its equivalent" >&2 - echo "Debian userspace architecture defined!" >&2 - echo "Falling back to using your current userspace instead!" >&2 - echo "Please add support for $UTS_MACHINE to ${0} ..." >&2 - echo "" >&2 - esac - if [ -n "$KBUILD_DEBARCH" ] ; then - debarch="$KBUILD_DEBARCH" - fi - forcearch="-DArchitecture=$debarch" - -} - -# Some variables and settings used throughout the script -version=$KERNELRELEASE -revision=$(cat .version) -if [ -n "$KDEB_PKGVERSION" ]; then - packageversion=$KDEB_PKGVERSION -else - packageversion=$version-$revision -fi -sourcename=$KDEB_SOURCENAME +version=$KDEB_VERSION tmpdir="$objtree/debian/tmp" fwdir="$objtree/debian/fwtmp" kernel_headers_dir="$objtree/debian/hdrtmp" @@ -101,9 +45,6 @@ fwpackagename=linux-firmware-image-$version kernel_headers_packagename=linux-headers-$version libc_headers_packagename=linux-libc-dev dbg_packagename=$packagename-dbg -debarch= -forcearch= -set_debarch if [ "$ARCH" = "um" ] ; then packagename=user-mode-linux-$version @@ -215,106 +156,6 @@ EOF chmod 755 "$tmpdir/DEBIAN/$script" done -# Try to determine maintainer and email values -if [ -n "$DEBEMAIL" ]; then - email=$DEBEMAIL -elif [ -n "$EMAIL" ]; then - email=$EMAIL -else - email=$(id -nu)@$(hostname -f 2>/dev/null || hostname) -fi -if [ -n "$DEBFULLNAME" ]; then - name=$DEBFULLNAME -elif [ -n "$NAME" ]; then - name=$NAME -else - name="Anonymous" -fi -maintainer="$name <$email>" - -# Try to determine distribution -if [ -n "$KDEB_CHANGELOG_DIST" ]; then - distribution=$KDEB_CHANGELOG_DIST -# In some cases lsb_release returns the codename as n/a, which breaks dpkg-parsechangelog -elif distribution=$(lsb_release -cs 2>/dev/null) && [ -n "$distribution" ] && [ "$distribution" != "n/a" ]; then - : # nothing to do in this case -else - distribution="unstable" - echo >&2 "Using default distribution of 'unstable' in the changelog" - echo >&2 "Install lsb-release or set \$KDEB_CHANGELOG_DIST explicitly" -fi - -# Generate a simple changelog template -cat <<EOF > debian/changelog -$sourcename ($packageversion) $distribution; urgency=low - - * Custom built Linux kernel. - - -- $maintainer $(date -R) -EOF - -# Generate copyright file -cat <<EOF > debian/copyright -This is a packacked upstream version of the Linux kernel. - -The sources may be found at most Linux archive sites, including: -https://www.kernel.org/pub/linux/kernel - -Copyright: 1991 - 2017 Linus Torvalds and others. - -The git repository for mainline kernel development is at: -git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; version 2 dated June, 1991. - -On Debian GNU/Linux systems, the complete text of the GNU General Public -License version 2 can be found in \`/usr/share/common-licenses/GPL-2'. -EOF - - -build_depends="bc, kmod, cpio " - -# Generate a control file -cat <<EOF > debian/control -Source: $sourcename -Section: kernel -Priority: optional -Maintainer: $maintainer -Build-Depends: $build_depends -Homepage: http://www.kernel.org/ -EOF - -if [ "$ARCH" = "um" ]; then - cat <<EOF >> debian/control - -Package: $packagename -Architecture: any -Description: User Mode Linux kernel, version $version - User-mode Linux is a port of the Linux kernel to its own system call - interface. It provides a kind of virtual machine, which runs Linux - as a user process under another Linux kernel. This is useful for - kernel development, sandboxes, jails, experimentation, and - many other things. - . - This package contains the Linux kernel, modules and corresponding other - files, version: $version. -EOF - -else - cat <<EOF >> debian/control - -Package: $packagename -Suggests: $fwpackagename -Architecture: any -Description: Linux kernel, version $version - This package contains the Linux kernel, modules and corresponding other - files, version: $version. -EOF - -fi - # Build kernel header package (cd $srctree; find . -name Makefile\* -o -name Kconfig\* -o -name \*.pl) > "$objtree/debian/hdrsrcfiles" (cd $srctree; find arch/*/include include scripts -type f) >> "$objtree/debian/hdrsrcfiles" @@ -335,43 +176,13 @@ mkdir -p "$destdir" ln -sf "/usr/src/linux-headers-$version" "$kernel_headers_dir/lib/modules/$version/build" rm -f "$objtree/debian/hdrsrcfiles" "$objtree/debian/hdrobjfiles" -cat <<EOF >> debian/control - -Package: $kernel_headers_packagename -Architecture: any -Description: Linux kernel headers for $KERNELRELEASE on \${kernel:debarch} - This package provides kernel header files for $KERNELRELEASE on \${kernel:debarch} - . - This is useful for people who need to build external modules -EOF - # Do we have firmware? Move it out of the way and build it into a package. if [ -e "$tmpdir/lib/firmware" ]; then mv "$tmpdir/lib/firmware"/* "$fwdir/lib/firmware/$version/" rmdir "$tmpdir/lib/firmware" - - cat <<EOF >> debian/control - -Package: $fwpackagename -Architecture: all -Description: Linux kernel firmware, version $version - This package contains firmware from the Linux kernel, version $version. -EOF - create_package "$fwpackagename" "$fwdir" fi -cat <<EOF >> debian/control - -Package: $libc_headers_packagename -Section: devel -Provides: linux-kernel-headers -Architecture: any -Description: Linux support headers for userspace development - This package provides userspaces headers from the Linux kernel. These headers - are used by the installed headers for GNU glibc and other system libraries. -EOF - if [ "$ARCH" != "um" ]; then create_package "$kernel_headers_packagename" "$kernel_headers_dir" create_package "$libc_headers_packagename" "$libc_headers_dir" @@ -390,47 +201,7 @@ if [ -n "$BUILD_DEBUG" ] ; then ln -s ../lib/modules/$version/vmlinux $dbg_dir/usr/lib/debug/boot/vmlinux-$version # kdump-tools ln -s lib/modules/$version/vmlinux $dbg_dir/usr/lib/debug/vmlinux-$version - - cat <<EOF >> debian/control - -Package: $dbg_packagename -Section: debug -Architecture: any -Description: Linux kernel debugging symbols for $version - This package will come in handy if you need to debug the kernel. It provides - all the necessary debug symbols for the kernel and its modules. -EOF - create_package "$dbg_packagename" "$dbg_dir" fi -if [ "x$1" = "xdeb-pkg" ] -then - cat <<EOF > debian/rules -#!/usr/bin/make -f - -build: - \$(MAKE) - -binary-arch: - \$(MAKE) KDEB_SOURCENAME=${sourcename} KDEB_PKGVERSION=${packageversion} bindeb-pkg - -clean: - rm -rf debian/*tmp debian/files - mv debian/ debian.backup # debian/ might be cleaned away - \$(MAKE) clean - mv debian.backup debian - -binary: binary-arch -EOF - mv ${sourcename}.tar.gz ../${sourcename}_${version}.orig.tar.gz - tar caf ../${sourcename}_${packageversion}.debian.tar.gz debian/{copyright,rules,changelog,control} - dpkg-source -cdebian/control -ldebian/changelog --format="3.0 (custom)" --target-format="3.0 (quilt)" \ - -b / ../${sourcename}_${version}.orig.tar.gz ../${sourcename}_${packageversion}.debian.tar.gz - mv ${sourcename}_${packageversion}*dsc .. - dpkg-genchanges > ../${sourcename}_${packageversion}_${debarch}.changes -else - dpkg-genchanges -b > ../${sourcename}_${packageversion}_${debarch}.changes -fi - exit 0 diff --git a/scripts/package/mkdebian b/scripts/package/mkdebian new file mode 100755 index 000000000000..75fc95a9bb21 --- /dev/null +++ b/scripts/package/mkdebian @@ -0,0 +1,209 @@ +#!/bin/sh +# +# Copyright 2003 Wichert Akkerman <wichert@xxxxxxxxx> +# +# Simple script to generate a debian/ directory for a Linux kernel. + +set -e + +set_debarch() { + # Attempt to find the correct Debian architecture + case "$UTS_MACHINE" in + i386|ia64|alpha) + debarch="$UTS_MACHINE" ;; + x86_64) + debarch=amd64 ;; + sparc*) + debarch=sparc ;; + s390*) + debarch=s390$(grep -q CONFIG_64BIT=y $KCONFIG_CONFIG && echo x || true) ;; + ppc*) + debarch=$(grep -q CPU_LITTLE_ENDIAN=y $KCONFIG_CONFIG && echo ppc64el || echo powerpc) ;; + parisc*) + debarch=hppa ;; + mips*) + debarch=mips$(grep -q CPU_LITTLE_ENDIAN=y $KCONFIG_CONFIG && echo el || true) ;; + aarch64|arm64) + debarch=arm64 ;; + arm*) + if grep -q CONFIG_AEABI=y $KCONFIG_CONFIG; then + if grep -q CONFIG_VFP=y $KCONFIG_CONFIG; then + debarch=armhf + else + debarch=armel + fi + else + debarch=arm + fi + ;; + *) + debarch=$(dpkg --print-architecture) + echo "" >&2 + echo "** ** ** WARNING ** ** **" >&2 + echo "" >&2 + echo "Your architecture doesn't have its equivalent" >&2 + echo "Debian userspace architecture defined!" >&2 + echo "Falling back to using your current userspace instead!" >&2 + echo "Please add support for $UTS_MACHINE to ${0} ..." >&2 + echo "" >&2 + esac + if [ -n "$KBUILD_DEBARCH" ] ; then + debarch="$KBUILD_DEBARCH" + fi + +} + +# Some variables and settings used throughout the script +version=$KERNELRELEASE +revision=$(cat .version) +if [ -n "$KDEB_PKGVERSION" ]; then + packageversion=$KDEB_PKGVERSION +else + packageversion=$version-$revision +fi +sourcename=$KDEB_SOURCENAME +packagename=linux-image-$version +fwpackagename=linux-firmware-image-$version +kernel_headers_packagename=linux-headers-$version +libc_headers_packagename=linux-libc-dev +dbg_packagename=$packagename-dbg +debarch= +set_debarch + +if [ "$ARCH" = "um" ] ; then + packagename=user-mode-linux-$version +fi + +# Try to determine maintainer and email values +if [ -n "$DEBEMAIL" ]; then + email=$DEBEMAIL +elif [ -n "$EMAIL" ]; then + email=$EMAIL +else + email=$(id -nu)@$(hostname -f 2>/dev/null || hostname) +fi +if [ -n "$DEBFULLNAME" ]; then + name=$DEBFULLNAME +elif [ -n "$NAME" ]; then + name=$NAME +else + name="Anonymous" +fi +maintainer="$name <$email>" + +# Try to determine distribution +if [ -n "$KDEB_CHANGELOG_DIST" ]; then + distribution=$KDEB_CHANGELOG_DIST +# In some cases lsb_release returns the codename as n/a, which breaks dpkg-parsechangelog +elif distribution=$(lsb_release -cs 2>/dev/null) && [ -n "$distribution" ] && [ "$distribution" != "n/a" ]; then + : # nothing to do in this case +else + distribution="unstable" + echo >&2 "Using default distribution of 'unstable' in the changelog" + echo >&2 "Install lsb-release or set \$KDEB_CHANGELOG_DIST explicitly" +fi + +mkdir -p debian/ + +# Generate a simple changelog template +cat <<EOF > debian/changelog +$sourcename ($packageversion) $distribution; urgency=low + + * Custom built Linux kernel. + + -- $maintainer $(date -R) +EOF + +# Generate copyright file +cat <<EOF > debian/copyright +This is a packacked upstream version of the Linux kernel. + +The sources may be found at most Linux archive sites, including: +https://www.kernel.org/pub/linux/kernel + +Copyright: 1991 - 2017 Linus Torvalds and others. + +The git repository for mainline kernel development is at: +git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; version 2 dated June, 1991. + +On Debian GNU/Linux systems, the complete text of the GNU General Public +License version 2 can be found in \`/usr/share/common-licenses/GPL-2'. +EOF + + +# Generate a control file +cat <<EOF > debian/control +Source: $sourcename +Section: kernel +Priority: optional +Maintainer: $maintainer +Build-Depends: bc, kmod, cpio +Homepage: http://www.kernel.org/ + +Package: $packagename +Suggests: $fwpackagename +Architecture: $debarch +Description: Linux kernel, version $version + This package contains the Linux kernel, modules and corresponding other + files, version: $version. + +Package: $fwpackagename +Architecture: all +Description: Linux kernel firmware, version $version + This package contains firmware from the Linux kernel, version $version. + +Package: $kernel_headers_packagename +Architecture: $debarch +Description: Linux kernel headers for $version on $debarch + This package provides kernel header files for $version on $debarch + . + This is useful for people who need to build external modules + +Package: $libc_headers_packagename +Section: devel +Provides: linux-kernel-headers +Architecture: $debarch +Description: Linux support headers for userspace development + This package provides userspaces headers from the Linux kernel. These headers + are used by the installed headers for GNU glibc and other system libraries. + +Package: $dbg_packagename +Section: debug +Architecture: $debarch +Description: Linux kernel debugging symbols for $version + This package will come in handy if you need to debug the kernel. It provides + all the necessary debug symbols for the kernel and its modules. +EOF + +echo $debarch > debian/arch +env > debian/env + +cat <<EOF > debian/rules +#!/usr/bin/make -f + +ifneq (,\$(filter parallel=%,\$(DEB_BUILD_OPTIONS))) + NUMJOBS = \$(patsubst parallel=%,%,\$(filter parallel=%,\$(DEB_BUILD_OPTIONS))) + MAKEFLAGS += -j\$(NUMJOBS) +endif + +build: + \$(MAKE) ARCH=${ARCH} + +binary-arch: + \$(MAKE) KDEB_VERSION=${version} ARCH=${ARCH} intdeb-pkg + +clean: + rm -rf debian/*tmp debian/files + mv debian/ debian.backup # debian/ might be cleaned away + \$(MAKE) clean + mv debian.backup debian + +binary-arch: build +binary: binary-arch +EOF + +exit 0 -- 2.11.0 -- To unsubscribe from this list: send the line "unsubscribe linux-kbuild" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html